[ { "question": "allow the device connected to port ge-0/0/0 to have a static IP address in Juniper ex3300 switch", "context": "set ethernet-switching-options secure-access-port interface dhcp-trusted", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface ge-0/0/0 dhcp-trusted\ncommit" }, { "question": "enable the device connected to port ge-0/0/7 to have a static IP address in Juniper ex3300 switch", "context": "set ethernet-switching-options secure-access-port interface dhcp-trusted", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface ge-0/0/7 dhcp-trusted\ncommit" }, { "question":"set port ge-1/0/5 as dhcp-trusted", "context": "set ethernet-switching-options secure-access-port interface dhcp-trusted", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access interface ge-1/0/5 dhcp-trusted\ncommit" }, { "question":"set port ge-1/0/5 as dhcp-trusted", "context": "set ethernet-switching-options secure-access-port interface dhcp-trusted", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access interface ge-1/0/5 dhcp-trusted\ncommit" }, { "question":"How to set an interface as dhcp trusted on Juniper ex3300 switch", "context": "set ethernet-switching-options secure-access-port interface dhcp-trusted", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access interface dhcp-trusted\ncommit" }, { "question":"allow the assignment of static ip address on ge-0/0/10", "context": "set ethernet-switching-options secure-access-port interface dhcp-trusted", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface ge-0/0/10 dhcp-trusted\ncommit" }, { "question":"allow the assignment of static ip address on ge-0/0/11", "context": "set ethernet-switching-options secure-access-port interface dhcp-trusted", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface ge-0/0/11 dhcp-trusted\ncommit" }, { "question":"enable the assignment of static ip address on ge-1/0/11", "context": "set ethernet-switching-options secure-access-port interface dhcp-trusted", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options securee-access-port interface ge-1/0/11 dhcp-trusted\ncommit" } , { "question":"Let interface ge-0/0/5 bypass IP source guard inspection", "context": "set ethernet-switching-options secure-access-port interface dhcp-trusted", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface ge-0/0/5 dhcp-trusted\ncommit" } , { "question":"How to make an interface bypass IP source guard inspection", "context": "set ethernet-switching-options secure-access-port interface dhcp-trusted", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface dhcp-trusted\ncommit" } , { "question":"How to disable the IP source guard inspection on a specific interface", "context": "set ethernet-switching-options secure-access-port interface dhcp-trusted", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface dhcp-trusted\ncommit" } , { "question":"Disable IP source guard inspection on interface ge-0/0/15", "context": "set ethernet-switching-options secure-access-port interface dhcp-trusted", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface ge-0/0/15 dhcp-trusted\ncommit" } , { "question":"Allow device connected to the interface range CAM-RANGE to have static IP addresses ", "context": "set ethernet-switching-options secure-access-port interface dhcp-trusted", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface CAM-RANGE dhcp-trusted\ncommit" } , { "question":"Allow DHCP responses from interface ge-1/0/8 ", "context": "set ethernet-switching-options secure-access-port interface dhcp-trusted", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface ge-1/0/8 dhcp-trusted\ncommit" } , { "question":"Deny DHCP responses from interface ge-1/0/18 ", "context": "set ethernet-switching-options secure-access-port interface no-dhcp-trusted", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface ge-1/0/18 no-dhcp-trusted\ncommit" } , { "question":"set the dhcp-trusted feature on the interface range TRUSTED-RANGE ", "context": "set ethernet-switching-options secure-access-port interface dhcp-trusted", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface TRUSTED-RANGE dhcp-trusted\ncommit" }, { "question":"delete the dhcp-trusted feature on the interface range TRUSTED-RANGE ", "context": "delete ethernet-switching-options secure-access-port interface dhcp-trusted", "answer": "Use the following command in the configuration mode:\ndelete ethernet-switching-options secure-access-port interface TRUSTED-RANGE dhcp-trusted\ncommit" } , { "question":"set the no-dhcp-trusted feature on the interface range WIRELESS-RANGE ", "context": "set ethernet-switching-options secure-access-port interface no-dhcp-trusted", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface WIRELESS-RANGE no-dhcp-trusted\ncommit" } , { "question":"create a new vlan", "context": "set vlans vlan-id ", "answer": "Use the following command in the configuration mode:\nset vlans vlan-id \ncommit" }, { "question":"how to create a new vlan", "context": "set vlans vlan-id ", "answer": "Use the following command in the configuration mode:\nset vlans vlan-id \ncommit" }, { "question":"create a new vlan with the name HR and vlan-id 10", "context": "set vlans vlan-id ", "answer": "Use the following command in the configuration mode:\nset vlans HR vlan-id 10\ncommit" }, { "question":"create a new vlan with the name FIN and vlan-id 11", "context": "set vlans vlan-id ", "answer": "Use the following command in the configuration mode:\nset vlans FIN vlan-id 11\ncommit" }, { "question":"set the interface ge-1/0/2 in the vlan Data", "context": "set interfaces unit family ethernet-switching port-mode access vlan members ", "answer": "Use the following command in the configuration mode:\nset interfaces ge-1/0/2 unit 0 family ethernet-switching port-mode access vlan members Data\ncommit" }, { "question":"how to make an interface a member of a specific vlan", "context": "set interfaces unit family ethernet-switching port-mode access vlan members ", "answer": "Use the following command in the configuration mode:\nset interfaces unit family ethernet-switching port-mode access vlan members \ncommit" }, { "question":"how to assign an interface to a vlan", "context": "set interfaces unit family ethernet-switching port-mode access vlan members ", "answer": "Use the following command in the configuration mode:\nset interfaces unit family ethernet-switching port-mode access vlan members \ncommit" }, { "question":"make the interface ge-1/0/12 a member in the vlan FIN", "context": "set interfaces unit family ethernet-switching port-mode access vlan members ", "answer": "Use the following command in the configuration mode:\nset interfaces ge-1/0/12 unit 0 family ethernet-switching port-mode access vlan members FIN\ncommit" }, { "question": "configure a data vlan with id 10 on juniper ex3300 switch and assign it to the following ports ge-0/0/0, ge-0/0/1, and ge-0/0/3", "context": "set vlans \nset interfaces unit family ethernet-switching port-mode access vlan members ", "answer": "Use the following commands in the configuration mode:\nset vlans data vlan-id 10\nset interfaces ge-0/0/0 unit 0 family ethernet-switching port-mode access vlan members 10\nset interfaces ge-0/0/1 unit 0 family ethernet-switching port-mode access vlan members 10\nset interfaces ge-0/0/3 unit 0 family ethernet-switching port-mode access vlan members 10\ncommit" }, { "question": "configure a data vlan with vlan-id 100 on juniper ex3300 switch and make the following interfaces ge-0/0/20, ge-0/0/11, and ge-0/0/13 members of the data vlan", "context": "set vlans \nset interfaces unit family ethernet-switching port-mode access vlan members ", "answer": "Use the following commands in the configuration mode:\nset vlans data vlan-id 100\nset interfaces ge-0/0/20 unit 0 family ethernet-switching port-mode access vlan members 100\nset interfaces ge-0/0/11 unit 0 family ethernet-switching port-mode access vlan members 100\nset interfaces ge-0/0/13 unit 0 family ethernet-switching port-mode access vlan members 100\ncommit" }, { "question":"port ge-0/0/0 is the uplink to another EX3300 switch that has the following vlans 10,20, 30 put the required configuration on this port, given that RSTP is enabled on both switches", "context": "set vlans vlan-id \nset interfaces unit family ethernet-switching port-mode trunk vlan members \nset protocols rstp interface mode point-to-point", "answer": "Use the following commands in the configuration mode:\nset vlans VLAN10 vlan-id 10\n set vlans VLAN20 vlan-id 20\nset vlans VLAN30 vlan-id 30\nset interfaces ge-0/0/0 unit 0 family ethernet-switching port-mode trunk vlan members 10\nset interfaces ge-0/0/0 unit 0 family ethernet-switching port-mode trunk vlan members 20\nset interfaces ge-0/0/0 unit 0 family ethernet-switching port-mode trunk vlan members 30\nset protocols rstp interface ge-0/0/0 mode point-to-point\ncommit" }, { "question":"I have a camera and I want to assign it a static IP and include it in the CAMERA vlan. The camera is connected to port ge-0/0/9", "context":"set vlans vlan-id \nset interfaces unit family ethernet-switching port-mode access vlan members \nset ethernet-switching-options secure-access-port interface dhcp-trusted", "answer": "Use the following commands in the configuration mode:\nset vlans CAMERA vlan-id \nset interfaces ge-0/0/9 unit 0 family ethernet-switching port-mode access vlan members CAMERA\nset ethernet-switching-options secure-access-port interface ge-0/0/9 dhcp-trusted\ncommit" }, { "question":"how to tag the default vlan with vlan id of 100", "context": "set vlans default vlan-id ", "answer": "Use the following command in the configuration mode:\nset vlans default vlan-id 100\ncommit" }, { "question":"define the l3 interface of the HR VLAN as vlan.2010", "context": "set vlans l3-interface ", "answer": "Use the following command in the configuration mode:\nset vlans HR l3-interface vlan.2010\ncommit" } , { "question":"set the l3 interface of the IT_DEP vlan to vlan.3010", "context": "set vlans l3-interface ", "answer": "Use the following command in the configuration mode:\nset vlans IT_DEP l3-interface vlan.3010\ncommit" } , { "question":"How to create l3 interface of a vlan", "context": "set vlans l3-interface ", "answer": "Use the following command in the configuration mode:\nset vlans l3-interface \ncommit" } , { "question":"How to set an l3 interface for a vlan", "context": "set vlans l3-interface ", "answer": "Use the following command in the configuration mode:\nset vlans l3-interface \ncommit" } , { "question":"set the interface ge-0/0/20 as access port", "context": "set interfaces unit family ethernet-switching port-mode access", "answer": "Use the following command in the configuration mode:\nset interfaces ge-0/0/20 unit 0 family ethernet-switching port-mode access\ncommit" }, { "question":"How to make an interface an access port", "context": "set interfaces unit family ethernet-switching port-mode access", "answer": "Use the following command in the configuration mode:\nset interfaces unit family ethernet-switching port-mode access\ncommit" }, { "question":"set port mode of interface ge-0/0/25 as access port", "context": "set interfaces unit family ethernet-switching port-mode access", "answer": "Use the following command in the configuration mode:\nset interfaces ge-0/0/25 unit 0 family ethernet-switching port-mode access\ncommit" }, { "question":"set the interface ge-1/0/5 to operate in access mode", "context": "set interfaces unit family ethernet-switching port-mode access", "answer": "Use the following command in the configuration mode:\nset interfaces ge-1/0/5 unit 0 family ethernet-switching port-mode access\ncommit" }, { "question":"let the interface ge-2/0/25 to operate in access mode", "context": "set interfaces unit family ethernet-switching port-mode access", "answer": "Use the following command in the configuration mode:\nset interfaces ge-2/0/25 unit 0 family ethernet-switching port-mode access\ncommit" }, { "question":"allow port ge-0/0/6 to carry traffic from multiple vlans", "context":"set interfaces unit family ethernet-switching port-mode trunk", "answer": "Use the following commands in the configuration mode:\nset interfaces ge-0/0/6 unit 0 family ethernet-switching port-mode trunk\ncommit" }, { "question":"enable the port ge-0/0/16 to carry traffic from multiple vlans", "context":"set interfaces unit family ethernet-switching port-mode trunk", "answer": "Use the following commands in the configuration mode:\nset interfaces ge-0/0/16 unit 0 family ethernet-switching port-mode trunk\ncommit" }, { "question":"set port ge-0/0/19 as a trunk port", "context":"set interfaces unit family ethernet-switching port-mode trunk", "answer": "Use the following commands in the configuration mode:\nset interfaces ge-0/0/19 unit 0 family ethernet-switching port-mode trunk\ncommit" }, { "question":"how to allow an interface to carry traffic from multiple vlans", "context":"set interfaces unit family ethernet-switching port-mode trunk", "answer": "Use the following commands in the configuration mode:\nset interfaces unit family ethernet-switching port-mode trunk\ncommit" }, { "question":"how to enable an interface to carry traffic from multiple vlans", "context":"set interfaces unit family ethernet-switching port-mode trunk", "answer": "Use the following commands in the configuration mode:\nset interfaces unit family ethernet-switching port-mode trunk\ncommit" }, { "question":"allow port ge-0/0/6 to carry traffic from all vlans", "context": "set interfaces unit 0 family ethernet-switching port-mode trunk vlan members all", "answer": "Use the following command in the configuration mode:\nset interfaces ge-0/0/6 unit 0 family ethernet-switching port-mode trunk vlan members all\ncommit" }, { "question":"allow port ge-0/0/9 to carry traffic from all vlans", "context": "set interfaces unit 0 family ethernet-switching port-mode trunk vlan members all", "answer": "Use the following command in the configuration mode:\nset interfaces ge-0/0/9 unit 0 family ethernet-switching port-mode trunk vlan members all\ncommit" }, { "question":"How to make an interface carry traffic from all vlans", "context": "set interfaces unit family ethernet-switching port-mode trunk vlan members all", "answer": "Use the following command in the configuration mode:\nset interfaces unit family ethernet-switching port-mode trunk vlan members all\ncommit" }, { "question": "make port ge-0/0/7 carry traffic from vlans HR, FIN, and MGMT", "context":"set interfaces unit family ethernet-switching port-mode trunk vlan members ", "answer": "Use the following commands in the configuration mode:\nset interfaces ge-0/0/7 unit 0 family ethernet-switching port-mode trunk vlan members HR\nset interfaces ge-0/0/7 unit 0 family ethernet-switching port-mode trunk vlan members MGMT\n set interfaces ge-0/0/7 unit 0 family ethernet-switching port-mode trunk vlan members FIN\ncommit" }, { "question": "make port ge-1/0/23 carry traffic from vlans REG, SUPPORT, and MGMT", "context":"set interfaces unit family ethernet-switching port-mode trunk vlan members ", "answer": "Use the following commands in the configuration mode:\nset interfaces ge-0/0/7 unit 0 family ethernet-switching port-mode trunk vlan members REG\nset interfaces ge-0/0/7 unit 0 family ethernet-switching port-mode trunk vlan members MGMT\n set interfaces ge-0/0/7 unit 0 family ethernet-switching port-mode trunk vlan members SUPPORT\ncommit" }, { "question": "We will connect a new switch on port ge-0/0/7 configure rstp on this interface as a point to point", "context":"set protocols rstp interface mode point-to-point", "answer": "Use the following command in the configuration mode:\nset protocols rstp interface ge-0/0/7.0 mode point-to-point\ncommit" }, { "question": "We will connect a new switch on port ge-0/0/9, the new switch has RSTP enabled, enable RSTP on ge-0/0/9 in the mode point to point", "context":"set protocols rstp interface mode point-to-point", "answer": "Use the following command in the configuration mode:\nset protocols rstp interface ge-0/0/9 mode point-to-point\ncommit" }, { "question": "How to make an interface participate in RSTP protocol in the mode point to point", "context":"set protocols rstp interface mode point-to-point", "answer": "Use the following command in the configuration mode:\nset protocols rstp interface mode point-to-point\ncommit" }, { "question": "How to set the RSTP interface mode to point to point", "context":"set protocols rstp interface mode point-to-point", "answer": "Use the following command in the configuration mode:\nset protocols rstp interface mode point-to-point\ncommit" }, { "question": "Execlude interface ge-0/0/19 from participating in RSTP", "context":"set protocols rstp interface disable", "answer": "Use the following command in the configuration mode:\nset protocols rstp interface ge-0/0/19 disable\ncommit" }, { "question": "How to execlude an interface from participating in RSTP", "context":"set protocols rstp interface disable", "answer": "Use the following command in the configuration mode:\nset protocols rstp interface disable\ncommit" }, { "question": "Disable RSTP protocol on interface ge-0/0/0", "context":"set protocols rstp interface disable", "answer": "Use the following command in the configuration mode:\nset protocols rstp interface ge-0/0/0 disable\ncommit" }, { "question": "How to disable RSTP protocol on a specific interface", "context":"set protocols rstp interface disable", "answer": "Use the following command in the configuration mode:\nset protocols rstp interface disable\ncommit" }, { "question": "Help me configure RSTP protocol on interface ge-0/0/1 to connect another switch on that port on a juniper switch ex3300 using command line", "context": "set protocols rstp interface mode point-to-point", "answer": "Use the following command in the configuration mode:\nset protocols rstp interface ge-0/0/1 mode point-to-point\ncommit" }, { "question": "How to configure RSTP protocol on interface ge-1/0/5 to connect another switch on that port on a juniper switch ex3300 using command line", "context": "set protocols rstp interface mode point-to-point", "answer": "Use the following command in the configuration mode:\nset protocols rstp interface ge-1/0/5 mode point-to-point\ncommit" }, { "question": "Configure RSTP on interface ge-0/0/20 in the mode shared", "context": "set protocols rstp interface mode shared", "answer": "Use the following command in the configuration mode:\nset protocols rstp interface ge-0/0/20 mode shared\ncommit" }, { "question": "how to set RSTP particpating interface in the mode shared", "context": "set protocols rstp interface mode shared", "answer": "Use the following command in the configuration mode:\nset protocols rstp interface mode shared\ncommit" }, { "question": "set RSTP mode on interface ge-2/0/20 as shared", "context": "set protocols rstp interface mode shared", "answer": "Use the following command in the configuration mode:\nset protocols rstp interface ge-2/0/20 mode shared\ncommit" }, { "question": "Enable RSTP on interface ge-0/0/7 in the mode point to point and set the no root port feature", "context": "set protocols rstp interface mode point-to-point no-root-port", "answer": "Use the following command in the configuration mode:\nset protocols rstp interface ge-0/0/7 mode point-to-point no-root-port\ncommit" }, { "question": "set RSTP on interface ge-0/0/15 in the mode point to point and prevent this interface from becoming a root interface", "context": "set protocols rstp interface mode point-to-point no-root-port", "answer": "Use the following command in the configuration mode:\nset protocols rstp interface ge-0/0/15 mode point-to-point no-root-port\ncommit" }, { "question": "Enable RSTP root-protect feature on interface ge-0/0/13", "context": "set protocols rstp interface no-root-port", "answer": "Use the following command in the configuration mode:\nset protocols rstp interface ge-0/0/13 no-root-port\ncommit" }, { "question": "how to enable RSTP root-protect feature on an interface", "context": "set protocols rstp interface no-root-port", "answer": "Use the following command in the configuration mode:\nset protocols rstp interface no-root-port\ncommit" }, { "question": "Enable the RSTP root protection feature on interface ge-0/0/3", "context": "set protocols rstp interface no-root-port", "answer": "Use the following command in the configuration mode:\nset protocols rstp interface ge-0/0/3 no-root-port\ncommit" }, { "question": "set the RSTP root-protect feature on interface ge-0/0/23", "context": "set protocols rstp interface no-root-port", "answer": "Use the following command in the configuration mode:\nset protocols rstp interface ge-0/0/23 no-root-port\ncommit" }, { "question": "how to set the RSTP root-protect feature on interface", "context": "set protocols rstp interface no-root-port", "answer": "Use the following command in the configuration mode:\nset protocols rstp interface no-root-port\ncommit" }, { "question": "Delete RSTP root-protect feature on interface ge-0/0/33", "context": "delete protocols rstp interface no-root-port", "answer": "Use the following command in the configuration mode:\ndelete protocols rstp interface ge-0/0/33 no-root-port\ncommit" }, { "question": "how to delete RSTP root-protect feature on a specific interface", "context": "delete protocols rstp interface no-root-port", "answer": "Use the following command in the configuration mode:\ndelete protocols rstp interface no-root-port\ncommit" }, { "question": "Disable RSTP root-protect feature on interface ge-0/0/42", "context": "delete protocols rstp interface no-root-port", "answer": "Use the following command in the configuration mode:\ndelete protocols rstp interface ge-0/0/42 no-root-port\ncommit" }, { "question": "Disable RSTP protocol", "context": "set protocols rstp disable", "answer": "Use the following command in the configuration mode:\nset protocols rstp disable\ncommit" }, { "question": "how to disable the RSTP protocol", "context": "set protocols rstp disable", "answer": "Use the following command in the configuration mode:\nset protocols rstp disable\ncommit" }, { "question": "Set the RSTP maximum age of received protocol BPDUs to 30", "context": "set protocols rstp max-age ", "answer": "Use the following command in the configuration mode:\nset protocols rstp max-age 30\ncommit" }, { "question": "How to set the RSTP maximum age of received protocol BPDUs", "context": "set protocols rstp max-age ", "answer": "Use the following command in the configuration mode:\nset protocols rstp max-age \ncommit" }, { "question": "Set the RSTP max age of received protocol BPDUs to 15", "context": "set protocols rstp max-age ", "answer": "Use the following command in the configuration mode:\nset protocols rstp max-age 15\ncommit" }, { "question": "Set the RSTP forwarding delay to 10", "context": "set protocols rstp forward-delay ", "answer": "Use the following command in the configuration mode:\nset protocols rstp forward-delay 10\ncommit" }, { "question": "How to set the RSTP forwarding delay", "context": "set protocols rstp forward-delay ", "answer": "Use the following command in the configuration mode:\nset protocols rstp forward-delay \ncommit" }, { "question": "Set the RSTP protocol forwarding delay to 20", "context": "set protocols rstp forward-delay ", "answer": "Use the following command in the configuration mode:\nset protocols rstp forward-delay 20\ncommit" }, { "question": "Set the RSTP bridge port delay during the listening and learning states to 30", "context": "set protocols rstp forward-delay ", "answer": "Use the following command in the configuration mode:\nset protocols rstp forward-delay 30\ncommit" }, { "question": "how to set the RSTP bridge port delay during the listening and learning states", "context": "set protocols rstp forward-delay ", "answer": "Use the following command in the configuration mode:\nset protocols rstp forward-delay \ncommit" }, { "question": "set RSTP protocol bridge priority to 8k", "context": "set protocols rstp bridge-priority ", "answer": "Use the following command in the configuration mode:\nset protocols rstp bridge-priority 8k\ncommit" }, { "question": "set the RSTP protocol bridge priority to 12k", "context": "set protocols rstp bridge-priority ", "answer": "Use the following command in the configuration mode:\nset protocols rstp bridge-priority 12k\ncommit" }, { "question": "how to set RSTP protocol bridge priority", "context": "set protocols rstp bridge-priority ", "answer": "Use the following command in the configuration mode:\nset protocols rstp bridge-priority \ncommit" }, { "question": "set the bridge priority of RSTP protocol to 16k", "context": "set protocols rstp bridge-priority ", "answer": "Use the following command in the configuration mode:\nset protocols rstp bridge-priority 16k\ncommit" }, { "question": "set RSTP protocol hello interval to 3 seconds", "context": "set protocols rstp hello-time ", "answer": "Use the following command in the configuration mode:\nset protocols rstp hello-time 3\ncommit" }, { "question": "how to set RSTP protocol hello interval", "context": "set protocols rstp hello-time ", "answer": "Use the following command in the configuration mode:\nset protocols rstp hello-time \ncommit" }, { "question": "set RSTP protocol hello interval to 5 seconds", "context": "set protocols rstp hello-time ", "answer": "Use the following command in the configuration mode:\nset protocols rstp hello-time 5\ncommit" }, { "question": "set RSTP protocol hello interval to 4 seconds", "context": "set protocols rstp hello-time ", "answer": "Use the following command in the configuration mode:\nset protocols rstp hello-time 4\ncommit" }, { "question": "Display RSTP protocol configurations from the operational mode", "context": "show configuration protocols rstp", "answer": "Use the following command in the operational mode:\nshow configuration protocols rstp" }, { "question": "how to show RSTP protocol configurations from the operational mode", "context": "show configuration protocols rstp", "answer": "Use the following command in the operational mode:\nshow configuration protocols rstp" }, { "question":"Show the current RSTP configuration", "context": "show configuration protocols rstp", "answer": "Use the following command in the operational mode:\nshow configuration protocols rstp" }, { "question":"Show the current RSTP configuration in the set format", "context": "show configuration protocols rstp", "answer": "Use the following command in the configuration mode:\nshow | display set |match rstp" }, { "question":"Display RSTP protocol configurations in the operational mode in the set format", "context":"show configuration protocols rstp | display set" , "answer": "Use the following command in the operational mode:\nshow configuration protocols rstp | display set" }, { "question":"block rstp bpdu on edge interfaces", "context": "set protocols rstp bpdu-block-on-edge", "answer": "Use the following command in the configuration mode:\nset protocols rstp bpdu-block-on-edge\ncommit" }, { "question":"set all interfaces on the switch to edge RSTP interfaces and enable bpdu-block-on-edge", "context": "set protocols rstp interface all edge\n set protocols rstp bpdu-block-on-edge", "answer": "Use the following command in the configuration mode:\nset protocols rstp interface all edge\nset protocols rstp bpdu-block-on-edge\ncommit" }, { "question":"How to block RSTP bpdu on edge interfaces", "context": "set protocols rstp bpdu-block-on-edge", "answer": "Use the following command in the configuration mode:\nset protocols rstp bpdu-block-on-edge\ncommit" }, { "question":"set interface ge-0/0/7 as RSTP edge interface", "context": "set protocols rstp interface edge", "answer": "Use the following command in the configuration mode:\nset protocols rstp interface ge-0/0/7 edge\ncommit" }, { "question":"Set RSTP taceoptions to trace all operations", "context": "set protocols rstp traceoptions flag all", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag all\ncommit" }, { "question":"Set RSTP taceoptions to trace all failure conditions", "context": "set protocols rstp traceoptions flag all-failures", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag all-failures\ncommit" }, { "question":"Disable RSTP all failure conditions taceoption", "context": "set protocols rstp traceoptions flag all-failures disable ", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag all-failures disable\ncommit" }, { "question":"Set RSTP taceoptions to trace BPDU reception and transmission", "context": "set protocols rstp traceoptions flag bpdu", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag bpdu\ncommit" }, { "question":"disable RSTP taceoptions of BPDU reception and transmission", "context": "set protocols rstp traceoptions flag bpdu disable", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag bpdu disable\ncommit" }, { "question":"Set RSTP taceoptions to trace bridge detection state machine", "context": "set protocols rstp traceoptions flag bridge-detection-state-machine", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag bridge-detection-state-machine\ncommit" }, { "question":"Disable RSTP bridge detection state machine taceoption", "context": "set protocols rstp traceoptions flag bridge-detection-state-machine disable", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag bridge-detection-state-machine disable\ncommit" }, { "question":"Set RSTP taceoptions to trace events to the protocol state machine", "context": "set protocols rstp traceoptions flag events", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag events\ncommit" }, { "question":"Disable RSTP taceoptions to trace events to the protocol state machine", "context": "set protocols rstp traceoptions flag events", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag events\ncommit" }, { "question":"Set RSTP taceoptions to trace port information state machine", "context": "set protocols rstp traceoptions flag port-information-state-machine", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag port-information-state-machine\ncommit" }, { "question":"Disable RSTP port information state machine taceoption", "context": "set protocols rstp traceoptions flag port-information-state-machine disable", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag port-information-state-machine disable\ncommit" }, { "question":"Set RSTP taceoptions to trace port migration state machine", "context": "set protocols rstp traceoptions flag port-migration-state-machine", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag port-migration-state-machine\ncommit" }, { "question":"Disable RSTP port migration state machine taceoption", "context": "set protocols rstp traceoptions flag port-migration-state-machine disable", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag port-migration-state-machine disable\ncommit" }, { "question":"Set RSTP taceoptions to trace port receive state machine ", "context": "set protocols rstp traceoptions flag port-receive-state-machine ", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag port-receive-state-machine\ncommit" }, { "question":"Disable RSTP port receive state machine traceoption", "context": "set protocols rstp traceoptions flag port-receive-state-machine disable", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag port-receive-state-machine disable\ncommit" }, { "question":"Set RSTP taceoptions to trace port role selection state machine", "context": "set protocols rstp traceoptions flag port-role-select-state-machine", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag port-role-select-state-machine\ncommit" }, { "question":"Disable RSTP port role selection state machine traceoption", "context": "set protocols rstp traceoptions flag port-role-select-state-machine disable", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag port-role-select-state-machine disable\ncommit" }, { "question":"Set RSTP taceoptions to trace port role transit state machine", "context": "set protocols rstp traceoptions flag port-role-transit-state-machine", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag port-role-transit-state-machine\ncommit" }, { "question":"Disable RSTP port role transit state machine traceoption", "context": "set protocols rstp traceoptions flag port-role-transit-state-machine disable", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag port-role-transit-state-machine disable\ncommit" }, { "question":"Set RSTP taceoptions to trace port state transit state machine", "context": "set protocols rstp traceoptions flag port-state-transit-state-machine", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag port-state-transit-state-machine\ncommit" }, { "question":"Disable RSTP port state transit state machine traceoption", "context": "set protocols rstp traceoptions flag port-state-transit-state-machine disable", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag port-state-transit-state-machine disable\ncommit" }, { "question":"Set RSTP taceoptions to trace state and events for ppmd process", "context": "set protocols rstp traceoptions flag ppmd", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag ppmd\ncommit" }, { "question":"Disable RSTP ppmd process state and events traceoption", "context": "set protocols rstp traceoptions flag ppmd disable", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag ppmd disable\ncommit" }, { "question":"Set RSTP taceoptions to trace when state machine variables change", "context": "set protocols rstp traceoptions flag state-machine-variables ", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag state-machine-variables\ncommit" }, { "question":"Disable RSTP machine variables change traceoption", "context": "set protocols rstp traceoptions flag state-machine-variables disable", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag state-machine-variables disable\ncommit" }, { "question":"Set RSTP taceoptions to trace protocol timers", "context": "set protocols rstp traceoptions flag timers ", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag timers\ncommit" }, { "question":"Disable RSTP protocol timers traceoption", "context": "set protocols rstp traceoptions flag timers disable", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag timers disable\ncommit" }, { "question":"Set RSTP taceoptions to trace topology change state machine", "context": "set protocols rstp traceoptions flag topology-change-state-machine", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag topology-change-state-machine\ncommit" }, { "question":"Disable RSTP topology change state machine traceoption", "context": "set protocols rstp traceoptions flag topology-change-state-machine disable", "answer": "Use the following command in the configuration mode:\nset protocols rstp traceoptions flag topology-change-state-machine disable\ncommit" }, { "question":"set the host name of the switch to HR", "context": "set system host-name ", "answer": "Use the following command in the configuration mode:\nset system host-name HR\ncommit" }, { "question":"set the host name of the switch to SW-SCHOOL", "context": "set system host-name ", "answer": "Use the following command in the configuration mode:\nset system host-name SW-SCHOOL\ncommit" }, { "question":"How can I set the host name of the switch", "context": "set system host-name ", "answer": "Use the following command in the configuration mode:\nset system host-name \ncommit" }, { "question":"make the switch synchronize its time with the ntp server 192.168.1.100", "context":"set system ntp server ", "answer": "Use the following commands in the configuration mode:\nset system ntp server 192.168.1.100\ncommit" }, { "question":"set up NTP server address 192.168.12.1", "context": "set system ntp server ", "answer": "Use the following command in the configuration mode\nset system ntp server 192.168.12.1\ncommit" }, { "question":"set ntp server address to 10.200.1.90 and add the following comment \"added ntp server\" to the commit ", "context": "set system ntp server \ncommit comment <\"string-comment\">", "answer": "Use the following command in the configuration mode:\nset system ntp server 10.200.1.90\n commit comment \"added ntp server\"" } , { "question":"set ntp server address to 10.200.1.90 and add the following comment \"configured ntp server\" to the commit ", "context": "set system ntp server \ncommit comment <\"string-comment\">", "answer": "Use the following command in the configuration mode:\nset system ntp server 10.200.1.90\ncommit comment \"configured ntp server\"" } , { "question":"help me configure ntp server on a juniper switch using command line" , "context": "set system ntp server ", "answer": "Use the following command in the configuration mode:\nset system ntp server \ncommit" }, { "question":"how to synchronize time to ntp server on a juniper switch using command line" , "context": "set system ntp server ", "answer": "Use the following command in the configuration mode:\nset system ntp server \ncommit" }, { "question":"delete the configured ntp server ", "context": "delete system ntp server ", "answer": "Use the following command in the configuration mode:\ndelete system ntp server \ncommit" } , { "question":"remove the configured ntp server ", "context": "delete system ntp server ", "answer": "Use the following command in the configuration mode:\ndelete system ntp server \ncommit" } , { "question":"Create new user account with operator privilege", "context":"set system login user class operator", "answer": "Use the following command in the configuration mode:\nset system login user class operator\ncommit" }, { "question":"How to set up a new user account with operator privilege on the EX3300 switch", "context":"set system login user class operator", "answer": "Use the following command in the configuration mode:\nset system login user class operator\ncommit" }, { "question":"How to set up a new user account with operator privilege on the EX3300 switch and prompt for plain text password ", "context":"set system login user class operator authentication plain-text-password", "answer": "Use the following command in the configuration mode:\nset system login user class operator authentication plain-text-password\ncommit" }, { "question":"Create new user account with the name TEST with operator privilege", "context":"set system login user class operator", "answer": "Use the following command in the configuration mode:\nset system login user TEST class operator\ncommit" }, { "question":"Create new user account with the name Sami with operator privilege and prompt for plain text password", "context":"set system login user class operator authentication plain-text-password", "answer": "Use the following command in the configuration mode:\nset system login user Sami class operator authentication plain-text-password\ncommit" }, { "question":"Add a new user login with super-user privilege", "context": "set system login user class super-user", "answer": "Use the following commands in the configuration mode:\nset system login user class super-user\ncommit" }, { "question":"Add a new user login with super-user privilege and prompt for plain text password", "context": "set system login user class super-user authentication plain-text-password", "answer": "Use the following commands in the configuration mode:\nset system login user class super-user authentication plain-text-password\ncommit" }, { "question":"Add a new user login named TEST with super-user privilege", "context": "set system login user class super-user", "answer": "Use the following commands in the configuration mode:\nset system login user TEST class super-user\ncommit" }, { "question":"Add a new user login named mohammed with super-user privilege and prompt for plain text password", "context": "set system login user class super-user authentication plain-text-password", "answer": "Use the following commands in the configuration mode:set system login user mohammed class super-user authentication plain-text-password\n commit" }, { "question":"allow ssh connections to the switch", "context":"set system services ssh", "answer": "Use the following commands in the configuration mode:\nset system services ssh\ncommit" }, { "question":"allow remote connections to the switch using ssh", "context":"set system services ssh\n", "answer": "Use the following commands in the configuration mode:\nset system services ssh\ncommit" }, { "question":"enable ssh connections to the switch", "context":"set system services ssh", "answer": "Use the following commands in the configuration mode:\nset system services ssh\ncommit" }, { "question":"enable ssh connections to the switch with max-sessions-per-connection set to 5, connection-limit set to 10, and rate-limit 5", "context":"set system services ssh max-sessions-per-connection connection-limit rate-limit ", "answer": "Use the following commands in the configuration mode:\nset system services ssh max-sessions-per-connection 5 connection-limit 10 rate-limit 5\ncommit" }, { "question":"enable ssh connections to the switch with max-sessions-per-connection set to 5", "context":"set system services ssh max-sessions-per-connection ", "answer": "Use the following commands in the configuration mode:\nset system services ssh max-sessions-per-connection 5\ncommit" }, { "question":" how to set the ssh max-sessions-per-connection", "context":"set system services ssh max-sessions-per-connection ", "answer": "Use the following commands in the configuration mode:\nset system services ssh max-sessions-per-connection \ncommit" }, { "question":" how to set the ssh maximum sessions per connection", "context":"set system services ssh max-sessions-per-connection ", "answer": "Use the following commands in the configuration mode:\nset system services ssh max-sessions-per-connection \ncommit" }, { "question":"set ssh connection-limit to 10", "context":"set system services ssh connection-limit ", "answer": "Use the following commands in the configuration mode:\nset system services ssh connection-limit 10\ncommit" }, { "question":"how to set ssh connection-limit", "context":"set system services ssh connection-limit ", "answer": "Use the following commands in the configuration mode:\nset system services ssh connection-limit \ncommit" }, { "question":" set the number of allowed ssh connections (connection-limit) to 10 and the number of allowed ssh connections per minute (rate-limit) to 4", "context":"set system services ssh connection-limit rate-limit ", "answer": "Use the following commands in the configuration mode:\nset system services ssh connection-limit 10 rate-limit 4\ncommit" }, { "question":"Configure lldp for all interfaces", "context":"set protocols lldp interface all\n", "answer": "Use the following commands in the configuration mode:\nset protocols lldp interface all\ncommit" }, { "question":"enable lldp on interface ge-0/0/13", "context":"set protocols lldp interface \n", "answer": "Use the following commands in the configuration mode:\nset protocols lldp interface ge-0/0/13\ncommit" }, { "question":"enable lldp on interface ge-0/0/23", "context":"set protocols lldp interface \n", "answer": "Use the following commands in the configuration mode:\nset protocols lldp interface ge-0/0/23\ncommit" }, { "question":"enable lldp med on interface ge-0/0/3", "context":"set protocols lldp-med interface \n", "answer": "Use the following commands in the configuration mode:\nset protocols lldp-med interface ge-0/0/3\ncommit" }, { "question":"Configure lldp med for all interfaces", "context":"set protocols lldp-med interface all\n", "answer": "Use the following commands in the configuration mode:\nset protocols lldp-med interface all\ncommit" }, { "question":"disable lldp on interface ge-0/0/0", "context":"set protocols lldp interface disable", "answer": "Use the following commands in the configuration mode:\nset protocols lldp interface ge-0/0/0 disable\ncommit" }, { "question":"disable lldp on interface ge-0/0/10", "context":"set protocols lldp interface disable", "answer": "Use the following commands in the configuration mode:\nset protocols lldp interface ge-0/0/10 disable\ncommit" }, { "question":"disable lldp on all interfaces", "context":"set protocols lldp interface all disable", "answer": "Use the following commands in the configuration mode:\nset protocols lldp interface all disable\ncommit" }, { "question":"disable lldp med on interface ge-0/0/1", "context":"set protocols lldp-med interface disable", "answer": "Use the following commands in the configuration mode:\nset protocols lldp-med interface ge-0/0/1 disable\ncommit" }, { "question":"disable lldp med on interface ge-0/0/11", "context":"set protocols lldp-med interface disable", "answer": "Use the following commands in the configuration mode:\nset protocols lldp-med interface ge-0/0/11 disable\ncommit" }, { "question":"disable lldp med on all interface", "context":"set protocols lldp-med interface all disable", "answer": "Use the following commands in the configuration mode:\nset protocols lldp-med interface all disable\ncommit" }, { "question":"how to disable lldp med on an interface", "context":"set protocols lldp-med interface disable", "answer": "Use the following commands in the configuration mode:\nset protocols lldp-med interface disable\ncommit" }, { "question":"how to disable lldp on an interface", "context":"set protocols lldp interface disable", "answer": "Use the following commands in the configuration mode:\nset protocols lldp interface disable\ncommit" }, { "question":"Show LLDP neighbor information", "context":"show lldp neighbors", "answer": "Use the following commands in the operational mode:\nshow lldp neighbors" }, { "question":"Display LLDP neighbor information", "context":"show lldp neighbors", "answer": "Use the following commands in the operational mode:\nshow lldp neighbors" }, { "question":"Display information about LLDP neighbors.", "context":"show lldp neighbors", "answer": "Use the following commands in the operational mode:\nshow lldp neighbors" }, { "question":"Show LLDP information of local device", "context":"show lldp local-information", "answer": "Use the following commands in the operational mode:\nshow lldp local-information" }, { "question":" Display the information that the switch provides in LLDP advertisements to its neighbors", "context":"show lldp local-information", "answer": "Use the following commands in the operational mode:\nshow lldp local-information" }, { "question":"Display the local information that are advertisements to LLDP neighbors", "context":"show lldp local-information", "answer": "Use the following commands in the operational mode:\nshow lldp local-information" }, { "question":" Display detailed LLDP information", "context":"show lldp detail", "answer": "Use the following commands in the operational mode:\nshow lldp detail" }, { "question":"show the lldp protocol detailed information and parameters ", "context":"show lldp detail", "answer": "Use the following commands in the operational mode:\nshow lldp detail" }, { "question":"Display detailed LLDP information for all interfaces", "context":"show lldp detail", "answer": "Use the following commands in the operational mode:\nshow lldp detail" }, { "question":"Show LLDP remote global statistics information", "context":"show lldp remote-global-statistics", "answer": "Use the following commands in the operational mode:\nshow lldp remote-global-statistics" }, { "question":"display LLDP protocol remote global statistics information", "context":"show lldp remote-global-statistics", "answer": "Use the following commands in the operational mode:\nshow lldp remote-global-statistics" }, { "question":"display the Link Layer Discovery Protocol remote global statistics information", "context":"show lldp remote-global-statistics", "answer": "Use the following commands in the operational mode:\nshow lldp remote-global-statistics" }, { "question":"show LLDP Remote Tables Counters", "context":"show lldp remote-global-statistics", "answer": "Use the following commands in the operational mode:\nshow lldp remote-global-statistics" }, { "question":"Display LLDP statistics on all interfaces and devices.", "context":"show lldp statistics", "answer": "Use the following commands in the operational mode:\nshow lldp statistics" }, { "question":"Display LLDP statistics", "context":"show lldp statistics", "answer": "Use the following commands in the operational mode:\nshow lldp statistics" }, { "question":"Display LLDP statistics of interface ge-0/0/10", "context":"show lldp statistics interface ", "answer": "Use the following commands in the operational mode:\nshow lldp statistics interface ge-0/0/10" }, { "question":"show the LLDP statistics of interface ge-1/0/10", "context":"show lldp statistics interface ", "answer": "Use the following commands in the operational mode:\nshow lldp statistics interface ge-1/0/10" }, { "question": "Configure lldp for VoIP telephones discovery on all interfaces", "context": "set protocols lldp-med interface all", "answer": "Use the following commands in the configuration mode:\nset protocols lldp-med interface all\ncommit" }, { "question":"block bpdu on interface g-0/0/7 given that the spanning tree protocol is disabled", "context": "set ethernet-switching-options bpdu-block interface ", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options bpdu-block interface ge-0/0/7\ncommit" }, { "question":"how to block bpdu on interface without using spanning tree protocols", "context": "set ethernet-switching-options bpdu-block interface ", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options bpdu-block interface \ncommit" }, { "question":"block bpdu on interface g-0/0/9 given that no spanning tree protocol is enabled", "context": "set ethernet-switching-options bpdu-block interface ", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options bpdu-block interface ge-0/0/9\ncommit" }, { "question":"Disable MAC-aging for the entire switch", "context": "set ethernet-switching-options mac-table-aging-time unlimited", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options mac-table-aging-time unlimited\ncommit" }, { "question":"set the MAC table aging timer to unlimited", "context": "set ethernet-switching-options mac-table-aging-time unlimited", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options mac-table-aging-time unlimited\ncommit" }, { "question":"set the MAC table aging timer to 400 second", "context": "set ethernet-switching-options mac-table-aging-time ", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options mac-table-aging-time 400\ncommit" }, { "question":"set the MAC table aging timer to 500 second", "context": "set ethernet-switching-options mac-table-aging-time ", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options mac-table-aging-time 500\ncommit" }, { "question":"how to set the MAC table aging timer", "context": "set ethernet-switching-options mac-table-aging-time ", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options mac-table-aging-time \ncommit" }, { "question":"set the aging timer of the mac table entries to 500 second", "context": "set ethernet-switching-options mac-table-aging-time ", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options mac-table-aging-time 500\ncommit" }, { "question":"set a mac limit of 2 on interface ge-0/0/7", "context":"set ethernet-switching-options secure-access-port interface mac-limit ", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface ge-0/0/7 mac-limit 2\ncommit" }, { "question":"how to set a mac limit on an interface", "context":"set ethernet-switching-options secure-access-port interface mac-limit ", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface mac-limit mac-limit", "answer": "Use the following command in the configuration mode:\ndelete ethernet-switching-options secure-access-port interface ge-0/0/4 mac-limit\ncommit" }, { "question":"set a mac limit of 10 on interface ge-0/0/8", "context":"set ethernet-switching-options secure-access-port interface mac-limit ", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface ge-0/0/8 mac-limit 10\ncommit" }, { "question":"set a mac limit of 1 on all interfaces", "context":"set ethernet-switching-options secure-access-port interface all mac-limit ", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface all mac-limit 1\ncommit" }, { "question":"how to set a mac limiton all interfaces", "context":"set ethernet-switching-options secure-access-port interface all mac-limit ", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface all mac-limit \ncommit" }, { "question":"delete the mac limit on all interfaces", "context":"delete ethernet-switching-options secure-access-port interface all mac-limit", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface all mac-limit\ncommit" }, { "question":"Limit the number of connected devices to one on each interface on the EX3300 switch", "context":"set ethernet-switching-options secure-access-port interface all mac-limit \ncommit", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface all mac-limit 1\n commit" }, { "question":"how to set a list of allowed Mac addresses on a specific interface", "context": "set ethernet-switching-options secure-access-port interface interface-name allowed-mac ", "answer":"Use the following command in the configuration:\nset ethernet-switching-options secure-access-port interface interface-name allowed-mac \ncommit" }, { "question":"how to set a mac limit on interface range", "context": "set ethernet-switching-options secure-access-port interface mac-limit \n commit", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface mac-limit \ncommit" }, { "question":"Clear all MAC address entries in the forwarding table", "context": "clear ethernet-switching-table", "answer": "Use the following command in the operational mode:\nclear ethernet-switching-table" }, { "question":"Clear all MAC address entries in the ethernet switching table", "context": "clear ethernet-switching-table", "answer": "Use the following command in the operational mode:\nclear ethernet-switching-table" }, { "question":"Clear port errors on the switch", "context":" clear ethernet-switching port-error", "answer": " Use the following command in the operational mode:\nclear ethernet-switching port-error" }, { "question":"Clear a bridge protocol data unit (BPDU) error condition", "context":"clear ethernet-switching bpdu-error", "answer": "Use the following command in the operational mode:\nclear ethernet-switching bpdu-error" }, { "question":"clear bpdu errors", "context":"clear ethernet-switching bpdu-error", "answer": "Use the following command in the operational mode:\nclear ethernet-switching bpdu-error" }, { "question":"Clear bpdu errors on interface ge-0/0/8", "context":"clear ethernet-switching bpdu-error interface ", "answer": "Use the following command in the operational mode:\nclear ethernet-switching bpdu-error interface ge-0/0/8" }, { "question":"how to clear bpdu errors on a specific interface", "context":"clear ethernet-switching bpdu-error interface ", "answer": "Use the following command in the operational mode:\nclear ethernet-switching bpdu-error interface " }, { "question":"clear port errors on the interface ge-0/0/9", "context":"clear ethernet-switching port-error interface ", "answer": "Use the following command in the operational mode:\nclear ethernet-switching port-error interface ge-0/0/9" }, { "question":"clear port errors on specific interface", "context" :"clear ethernet-switching port-error interface ", "answer": "Use the following command in the operational mode:\nclear ethernet-switching port-error interface " }, { "question":"how to clear port errors on specific interface", "context" :"clear ethernet-switching port-error interface ", "answer": "Use the following command in the operational mode:\nclear ethernet-switching port-error interface " }, { "question":"restore the interfaces blocked due to storm control violation", "context": "clear ethernet-switching port-error", "answer": "Use the following command in the operational mode:\nclear ethernet-switching port-error" } , { "question":"restore the operation on interface ge-0/0/8", "context": "clear ethernet-switching port-error interface ", "answer": "Use the following command in the operational mode:\nclear ethernet-switching port-error interface ge-0/0/8" } , { "question":"manually clear storm control violation on interface ge-0/0/12", "context": "clear ethernet-switching port-error interface ", "answer": "Use the following command in the operational mode:\nclear ethernet-switching port-error interface ge-0/0/12" }, { "question":"How to configure preprovisioned virtual-chassis for ex3300 switches", "context": "set virtual-chassis preprovisioned\nset virtual-chassis member serial-number role routing-engine\nset virtual-chassis member serial-number role line-card", "answer": "Use the following command in the configuration mode:\nset virtual-chassis preprovisioned\nset virtual-chassis member serial-number role routing-engine\nset virtual-chassis member serial-number role line-card\ncommit" }, { "question":"configure the virtual chassis member 0 with serial number GA021534033 in the role routing enginer", "context": "set virtual-chassis member serial-number role routing-engine", "answer": "Use the following command in the configuration mode:\nset virtual-chassis member 0 serial-number GA021534033 role routing-engine\ncommit" }, { "question":"how to add a virtual chassis member as a routing engine role", "context": "set virtual-chassis member serial-number role routing-engine", "answer": "Use the following command in the configuration mode:\nset virtual-chassis member serial-number role routing-engine\ncommit" }, { "question":"configure the virtual chassis member 1 with serial number GA021524033 in the role routing enginer", "context": "set virtual-chassis member serial-number role routing-engine", "answer": "Use the following command in the configuration mode:\nset virtual-chassis member 1 serial-number GA021524033 role routing-engine\ncommit" }, { "question":"configure the virtual chassis with the member id 3 and serial number GA022534033 in the role line-card ", "context": "set virtual-chassis member serial-number role line-card", "answer": "Use the following command in the configuration mode:\nset virtual-chassis member 3 serial-number GA022534033 role line-card\ncommit" }, { "question":"how to configure a virtual chassis with the member in the role line-card ", "context": "set virtual-chassis member serial-number role line-card", "answer": "Use the following command in the configuration mode:\nset virtual-chassis member serial-number role line-card\ncommit" }, { "question":"configure the virtual chassis member with id 4 and serial number GA222534033 as a line card", "context": "set virtual-chassis member serial-number role line-card", "answer": "Use the following command in the configuration mode:\nset virtual-chassis member 4 serial-number GA222534033 role line-card\ncommit" }, { "question":"delete the virtual chassis member with the id 7 ", "context": "delete virtual-chassis member ", "answer": "Use the following command in the configuration mode:\ndelete virtual-chassis member 7\ncommit" }, { "question":"how to delete a virtual chassis member of specific id", "context": "delete virtual-chassis member ", "answer": "Use the following command in the configuration mode:\ndelete virtual-chassis member \ncommit" }, { "question":"delete the virtual chassis member 5 ", "context": "delete virtual-chassis member ", "answer": "Use the following command in the configuration mode:\ndelete virtual-chassis member 5\ncommit" }, { "question": "disable the virtual chassis split and merge feature", "context": "set virtual-chassis no-split-detection", "answer": "Use the following command in the configuration mode:\nset virtual-chassis no-split-detection\ncommit" }, { "question": "set the virtual chassis no split detection feature", "context": "set virtual-chassis no-split-detection", "answer": "Use the following command in the configuration mode:\nset virtual-chassis no-split-detection\ncommit" }, { "question": "set the virtual-chassis to only accept preprovisioned members", "context": "set virtual-chassis preprovisioned", "answer": "Use the following command in the configuration mode:\nset virtual-chassis preprovisioned\ncommit" }, { "question": "enable the virtual chassis preprovisioned mode", "context": "set virtual-chassis preprovisioned", "answer": "Use the following command in the configuration mode:\nset virtual-chassis preprovisioned\ncommit" }, { "question": "Disable automatic Virtual Chassis port (VCP) conversion in a Virtual Chassis", "context": "set virtual-chassis no-auto-conversion", "answer": "Use the following command in the configuration mode:\nset virtual-chassis no-auto-conversion\ncommit" }, { "question": "Disable automatic virtual chassis VC port conversion", "context": "set virtual-chassis no-auto-conversion", "answer": "Use the following command in the configuration mode:\nset virtual-chassis no-auto-conversion\ncommit" }, { "question": "Enable automatic Virtual Chassis port (VCP) conversion", "context": "set virtual-chassis auto-conversion", "answer": "Use the following command in the configuration mode:\nset virtual-chassis auto-conversion\ncommit" }, { "question": "Enable automatic VC port conversion in virtual-chassis", "context": "set virtual-chassis auto-conversion", "answer": "Use the following command in the configuration mode:\nset virtual-chassis auto-conversion\ncommit" }, { "question": "Enable Fast failover on GE VC uplink ports", "context": "set virtual-chassis fast-failover ge", "answer": "Use the following command in the configuration mode:\nset virtual-chassis fast-failover ge\ncommit" }, { "question": "Enable Fast failover on GE virtual chassis uplink ports", "context": "set virtual-chassis fast-failover ge", "answer": "Use the following command in the configuration mode:\nset virtual-chassis fast-failover ge\ncommit" }, { "question": "set the virtual chassis Fast failover for GE VC uplink ports", "context": "set virtual-chassis fast-failover ge", "answer": "Use the following command in the configuration mode:\nset virtual-chassis fast-failover ge\ncommit" }, { "question": "disable the virtual chassis Fast failover for GE VC uplink ports", "context": "delete virtual-chassis fast-failover ge", "answer": "Use the following command in the configuration mode:\ndelete virtual-chassis fast-failover ge\ncommit" }, { "question": "Enable Fast failover on XE VC uplink ports", "context": "set virtual-chassis fast-failover xe", "answer": "Use the following command in the configuration mode:\nset virtual-chassis fast-failover xe\ncommit" }, { "question": "Enable virtual chassis fast failover on XE VC uplink ports", "context": "set virtual-chassis fast-failover xe", "answer": "Use the following command in the configuration mode:\nset virtual-chassis fast-failover xe\ncommit" }, { "question": "set the Fast failover for XE VC uplink ports", "context": "set virtual-chassis fast-failover xe", "answer": "Use the following command in the configuration mode:\nset virtual-chassis fast-failover xe\ncommit" }, { "question": "disable the virtual chassis fast failover for XE VC uplink ports", "context": "delete virtual-chassis fast-failover xe", "answer": "Use the following command in the configuration mode:\ndelete virtual-chassis fast-failover xe\ncommit" }, { "question": "delete the virtual chassis fast failover for XE VC uplink ports", "context": "delete virtual-chassis fast-failover xe", "answer": "Use the following command in the configuration mode:\ndelete virtual-chassis fast-failover xe\ncommit" }, { "question": "Enable Fast failover on ET VC uplink ports", "context": "set virtual-chassis fast-failover et", "answer": "Use the following command in the configuration mode:\nset virtual-chassis fast-failover et\ncommit" }, { "question": "set the virtual chassis fast failover for ET VC uplink ports", "context": "set virtual-chassis fast-failover et", "answer": "Use the following command in the configuration mode:\nset virtual-chassis fast-failover et\ncommit" }, { "question": "delete the virtual chassis Fast failover for ET VC uplink ports", "context": "delete virtual-chassis fast-failover et", "answer": "Use the following command in the configuration mode:\ndelete virtual-chassis fast-failover et\ncommit" }, { "question": "remove the virtual chassis Fast failover for ET VC uplink ports", "context": "delete virtual-chassis fast-failover et", "answer": "Use the following command in the configuration mode:\ndelete virtual-chassis fast-failover et\ncommit" }, { "question": "show the virtual chassis fast failover status", "context": "show virtual-chassis fast-failover", "answer": "Use the following command in the opertional mode:\nshow virtual-chassis fast-failover" }, { "question": "Display Virtual chassis active topology", "context": "show virtual-chassis active-topology", "answer": "Use the following command in the opertional mode:\nshow virtual-chassis active-topology" }, { "question": "Display Virtual chassis PFE device topology ", "context": "show virtual-chassis device-topology", "answer": "Use the following command in the opertional mode:\nshow virtual-chassis device-topology" }, { "question": "show Virtual chassis packet forwarding engine device topology ", "context": "show virtual-chassis device-topology", "answer": "Use the following command in the opertional mode:\nshow virtual-chassis device-topology" }, { "question": "show Virtual chassis device topology ", "context": "show virtual-chassis device-topology", "answer": "Use the following command in the opertional mode:\nshow virtual-chassis device-topology" }, { "question": "show Virtual chassis status information", "context": "show virtual-chassis status", "answer": "Use the following command in the opertional mode:\nshow virtual-chassis status" }, { "question": "show Virtual chassis status information", "context": "show virtual-chassis status", "answer": "Use the following command in the opertional mode:\nshow virtual-chassis status" }, { "question": "display the Virtual chassis status information", "context": "show virtual-chassis status", "answer": "Use the following command in the opertional mode:\nshow virtual-chassis status" }, { "question": "Get routing table from local virtual chassis member", "context": "show virtual-chassis protocol route local", "answer": "Use the following command in the opertional mode:\nshow virtual-chassis protocol route local" }, { "question": "show the virtual chassis routing table from local member", "context": "show virtual-chassis protocol route local", "answer": "Use the following command in the opertional mode:\nshow virtual-chassis protocol route local" }, { "question": "Display the virtual chassis protocol interface information", "context": "show virtual-chassis protocol interface", "answer": "Use the following command in the opertional mode:\nshow virtual-chassis protocol interface" }, { "question": "Show the virtual chassis protocol interface information", "context": "show virtual-chassis protocol interface", "answer": "Use the following command in the opertional mode:\nshow virtual-chassis protocol interface" }, { "question": "Show the virtual chassis routing table", "context": "show virtual-chassis protocol route", "answer": "Use the following command in the opertional mode:\nshow virtual-chassis protocol route" }, { "question": "How to configure a static route", "context":"set routing-options static route next-hop " , "answer": "Use the following command in the configuration mode:\nset routing-options static route next-hop \ncommit" }, { "question":"Configure a static route to network 192.168.100.0/24 with the next hop 192.168.100.1", "context":"set routing-options static route next-hop ", "answer": "Use the following command in the configuration mode:\nset routing-options static route 192.168.100.0/24 next-hop 192.168.100.1\ncommit" }, { "question":"Configure a static route to network 10.168.100.0/24 with the next hop 10.168.100.1", "context":"set routing-options static route next-hop ", "answer": "Use the following command in the configuration mode:\nset routing-options static route 10.168.100.0/24 next-hop 10.168.100.1\ncommit" }, { "question":"set up a static route to network 10.16.10.0/24 with the next hop 10.16.10.1", "context":"set routing-options static route next-hop ", "answer": "Use the following command in the configuration mode:\nset routing-options static route 10.16.10.0/24 next-hop 10.16.10.1\ncommit" }, { "question":"assign interface ge-0/0/0 the following IP address 192.168.1.2/24", "context": "set interfaces unit family inet address ", "answer": "Use the following command in the configuration mode:\nset interfaces ge-0/0/0 unit 0 family inet address 192.168.1.2/24\ncommit" }, { "question":"set the ip address 192.168.100.3/24 to the interface ge-0/0/1", "context": "set interfaces unit family inet address ", "answer": "Use the following command in the configuration mode:\nset interfaces ge-0/0/1 unit 0 family inet address 192.168.100.3/24\ncommit" }, { "question":"how to set IP address to an interface in Juniper ex3300", "context": "set interfaces unit family inet address ", "answer": "Use the following command in the configuration mode:\nset interfaces unit family inet address \ncommit" }, { "question":"set the following description \"Uplink to Lab 2\" on interface ge-0/0/10", "context": "set interfaces unit description \"DESCRIPTION\"", "answer": "Use the following command in the configuration mode:\nset interfaces ge-0/0/10 unit 0 description \"Uplink to Lab 2\"\ncommit" }, { "question":"set the following description \"Printer\" on interface ge-1/0/10", "context": "set interfaces unit description \"DESCRIPTION\"", "answer": "Use the following command in the configuration mode:\nset interfaces ge-1/0/10 unit 0 description Printer\ncommit" }, { "question":"how to set a description to an interface", "context": "set interfaces unit description \n commit", "answer": "Use the following command in the configuration mode:\nset interfaces unit description \ncommit" }, { "question":"display the ethernet switching table", "context": "show ethernet-switching table", "answer": "Use the following command in the operational mode:\nshow ethernet-switching table" }, { "question":"display MAC address information of the switch ports", "context": "show ethernet-switching table", "answer": "Use the following command in the operational mode:\nshow ethernet-switching table" }, { "question":"show the mac information of the interface ge-0/0/2", "context": "show ethernet-switching table interface ", "answer": "Use the following command in the operational mode:\nshow ethernet-switching table interface ge-0/0/2" }, { "question":"how to show the mac information of an interface", "context": "show ethernet-switching table interface ", "answer": "Use the following command in the operational mode:\nshow ethernet-switching table interface " }, { "question":"Determine the interface to which the MAC address 00:19:99:93:93:3a is connected", "context": "show ethernet-switching table | match ", "answer": "Use the following command in the operational mode:\nshow ethernet-switching table | match 00:19:99:93:93:3a" }, { "question":"Find the interface to which the MAC address ac:b9:2f:2f:81:26 is connected", "context": "show ethernet-switching table | match ", "answer": "Use the following command in the operational mode:\nshow ethernet-switching table | match ac:b9:2f:2f:81:26" }, { "question":"How to find the interface to which a specific MAC address is connected", "context": "show ethernet-switching table | match ", "answer": "Use the following command in the operational mode:\nshow ethernet-switching table |match " }, { "question":"How to find the interface to which a device is connected", "context": "show ethernet-switching table | match ", "answer": "Use the following command in the operational mode:\nshow ethernet-switching table |match " }, { "question":"display MAC address information of the switch ports", "context": "show ethernet-switching table", "answer": "Use the following command in the operational mode:\nshow ethernet-switching table" }, { "question":"show the mac information of the interface ge-0/0/2", "context": "show ethernet-switching table interface ", "answer": "Use the following command in the operational mode:\nshow ethernet-switching table interface ge-0/0/2" }, { "question":"show the ethernet switching table", "context": "show ethernet-switching table", "answer": "Use the following command in the operational mode:\nshow ethernet-switching table" }, { "question":"Displays the event log of learned MAC addresses", "context": "show ethernet-switching mac-learning-log", "answer": "Use the following command in the operational mode:\nshow ethernet-switching mac-learning-log" }, { "question":"Show MAC address learning log", "context": "show ethernet-switching mac-learning-log", "answer": "Use the following command in the operational mode:\nshow ethernet-switching mac-learning-log" }, { "question":"Show media access control learning statistics", "context": "show ethernet-switching statistics mac-learning", "answer": "Use the following command in the operational mode:\nshow ethernet-switching statistics mac-learning" }, { "question":"Show MAC learning statistics", "context": "show ethernet-switching statistics mac-learning", "answer": "Use the following command in the operational mode:\nshow ethernet-switching statistics mac-learning" }, { "question":"Display MAC learning statistics for all interfaces", "context": "show ethernet-switching statistics mac-learning", "answer": "Use the following command in the operational mode:\nshow ethernet-switching statistics mac-learning" }, { "question":"display overview of OSPF information", "context": "show ospf overview", "answer": "Use the following command in the operational mode:\nshow ospf overview" }, { "question":"Display Open Shortest Path First (OSPF) overview information", "context": "show ospf overview", "answer": "Use the following command in the operational mode:\nshow ospf overview" }, { "question":"Show OSPF link-state database", "context": "show ospf database", "answer": "Use the following command in the operational mode:\nshow ospf database" }, { "question":"Display the entries in the OSPF link-state database", "context": "show ospf database", "answer": "Use the following command in the operational mode:\nshow ospf database" }, { "question":"show information about entries in the OSPFv2 link-state database for all routing instances", "context": "show ospf database", "answer": "Use the following command in the operational mode:\nshow ospf database" }, { "question":"Show OSPF neighbor status information", "context": "show ospf neighbor", "answer": "Use the following command in the operational mode:\nshow ospf neighbor" }, { "question":"display OSPF neighbor status", "context": "show ospf neighbor" , "answer": "Use the following command in the operational mode:\nshow ospf neighbor" }, { "question":"Display information about OSPF neighbors", "context": "show ospf neighbor" , "answer": "Use the following command in the operational mode:\nshow ospf neighbor" }, { "question":"Show OSPF routing table", "context": "show ospf route", "answer": "Use the following command in the operational mode:\nshow ospf route" } , { "question":"display OSPF routing table", "context": "show ospf route", "answer": "Use the following command in the operational mode:\nshow ospf route" }, { "question": "Show shortest-path-first calculations of OSPF", "context": "show ospf log", "answer": "Use the following command in the operational mode:\nshow ospf log" }, { "question": "Display the OSPF log of Shortes Path First calculations", "context": "show ospf log", "answer": "Use the following command in the operational mode:\nshow ospf log" }, { "question":"Show OSPF interface status information", "context": "show ospf interface", "answer": "Use the following command in the operational mode:\nshow ospf interface" }, { "question":"Display the status of OSPF interfacs", "context": "show ospf interface", "answer": "Use the following command in the operational mode:\nshow ospf interface" }, { "question":"configure interface ge-0/0/5 to be part of ospf area 0 in the passive mode", "context": "set protocols ospf area interface passive", "answer": "Use the following command in the configuration mode:\nset protocols ospf area 0.0.0.0 interface ge-0/0/5 passive\ncommit" }, { "question":"configure interface ge-0/0/7 to be part of ospf area 0 in the passive mode", "context": "set protocols ospf area interface passive", "answer": "Use the following command in the configuration mode:\nset protocols ospf area 0.0.0.0 interface ge-0/0/7 passive\ncommit" }, { "question":"how to configure ospf on a point-to-point interface", "context": "set protocols ospf area interface interface-type p2p", "answer": "Use the following command in the configuration mode:\nset protocols ospf area interface interface-type p2p\ncommit" }, { "question":"configure OSPF protocol of area 0.0.0.1 on interface ge-0/0/15 as point to point ", "context": "set protocols ospf area interface interface-type p2p", "answer": "Use the following command in the configuration mode:\nset protocols ospf area 0.0.0.1 interface ge-0/0/15 interface-type p2p\ncommit" }, { "question":"set the interface ge-0/0/5 as point to point in the OSPF area 0.0.0.0 ", "context": "set protocols ospf area interface interface-type p2p", "answer": "Use the following command in the configuration mode:\nset protocols ospf area 0.0.0.0 interface ge-0/0/5 interface-type p2p\ncommit" }, { "question":"set ospf hello interval on interface ge-0/0/15 to 4", "context": "set protocols ospf area interface hello-interval ", "answer": "Use the following command in the configuration mode:\nset protocols ospf area interface ge-0/0/15 hello-interval 4\ncommit" }, { "question":"how to configure ospf hello interval", "context": "set protocols ospf area interface hello-interval ", "answer": "Use the following command in the configuration mode:\nset protocols ospf area interface hello-interval \ncommit" }, { "question":"set ospf hello interval of area 0.0.0.1 on interface ge-0/0/15 to 2", "context": "set protocols ospf area interface hello-interval ", "answer": "Use the following command in the configuration mode:\nset protocols ospf area 0.0.0.1 interface ge-0/0/15 hello-interval 2\ncommit" }, { "question":"configure OSPF dead interval", "context": "set protocols ospf area interface dead-interval ", "answer": "Use the following command in the configuration mode:\nset protocols ospf area interface dead-interval \ncommit" }, { "question":"configure OSPF with dead interval equal to 8", "context": "set protocols ospf area interface dead-interval ", "answer": "Use the following command in the configuration mode:\nset protocols ospf area interface dead-interval 8\ncommit" }, { "question":"set the OSPF dead interval of area 0.0.0.1 to 8", "context": "set protocols ospf area interface dead-interval ", "answer": "Use the following command in the configuration mode:\nset protocols ospf area 0.0.0.1 interface dead-interval 8\ncommit" }, { "question":"set the OSPF dead interval of area 0.0.0.1 on the interface ge-0/0/2 to 8", "context": "set protocols ospf area interface dead-interval ", "answer": "Use the following command in the configuration mode:\nset protocols ospf area 0.0.0.1 interface ge-0/0/2 dead-interval 8\ncommit" }, { "question":"disable the OSPF protocol", "context": "set protocols ospf disable", "answer": "Use the following command in the configuration mode:\nset protocols ospf disable\ncommit" }, { "question":"how to disable the OSPF protocol", "context": "set protocols ospf disable", "answer": "Use the following command in the configuration mode:\nset protocols ospf disable\ncommit" }, { "question":"set up the configuration required on port ge-0/0/10 to connect it to a IP phone", "context": "set interfaces unit 0 family ethernet-switching vlan members \nset interfaces unit family ethernet-switching port-mode access\nset ethernet-switching-options voip interface vlan ", "answer": "Use the following commands in the configuration mode:\nset interfaces ge-0/0/10 unit 0 family ethernet-switching vlan members DATA-VLAN\nset interfaces ge-0/0/10 unit 0 family ethernet-switching port-mode access\nset ethernet-switching-options voip interface ge-0/0/10 vlan voice-vlan\nset voip interface ge-0/0/10 forwarding-class assured-forwarding\ncommit" }, { "question":"set the voip feature on port ge-0/0/11 given the voice vlan is VOICE", "context": "set ethernet-switching-options voip interface vlan ", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options voip interface ge-0/0/11 vlan VOICE\ncommit" }, { "question":"how to set the voip feature for an interface", "context": "set ethernet-switching-options voip interface vlan ", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options voip interface vlan \ncommit" }, { "question":"Show VLAN information", "context": "show vlans", "answer": "Use the following command in the operational mode:\nshow vlans" }, { "question":"show the configured VLANS the corresponding ports membership information", "context": "show vlans", "answer": "Use the following command in the operational mode:\nshow vlans" }, { "question":"Show information about the configured VLANs", "context": "show vlans", "answer": "Use the following command in the operational mode:\nshow vlans" }, { "question":"display the configured VLANS and the active ports in each VLAN", "context": "show vlans", "answer": "Use the following command in the operational mode:\nshow vlans" }, { "question":"display dhcp snooping binding database", "context": "show dhcp snooping binding", "answer": "Use the following command in the operational mode:\nshow dhcp snooping binding" }, { "question":"display dhcp snooping binding for interface ge-1/0/2", "context": "show dhcp snooping binding | match ", "answer": "Use the following command in the operational mode:\nshow dhcp snooping binding | match ge-1/0/2" }, { "question":"display the MAC-IP binding on the interfaces", "context": "show dhcp snooping binding", "answer": "Use the following command in the operational mode shows the MAC-IP binding:\nshow dhcp snooping binding" }, { "question":"Show the IP addresses connected to interface ge-0/0/22", "context": "show dhcp snooping binding | match ", "answer": "Use the following command in the operational mode:\nshow dhcp snooping binding | match ge-0/0/22" }, { "question":"create a link aggregation composed of interfaces ge-0/0/0 and ge-1/0/0 in active mode and with link speed of 1G and fast periodic transmission of LACP packets", "context": "set interfaces ether-options 802.3ad ae0\n set interfaces ether-options 802.3ad ae0\n set interfaces ae0 aggregated-ether-options link-speed \n set interfaces ae0 aggregated-ether-options lacp active\n set interfaces ae0 aggregated-ether-options lacp periodic fast", "answer": "Use the following command in the configuration mode:\nset interfaces ge-0/0/0 ether-options 802.3ad ae0\n set interfaces ge-1/0/0 ether-options 802.3ad ae0\n set interfaces ae0 aggregated-ether-options link-speed 1g\n set interfaces ae0 aggregated-ether-options lacp active\n set interfaces ae0 aggregated-ether-options lacp periodic fast\ncommit" }, { "question":"disable interface ge-0/0/4", "context": "set interfaces disable", "answer": "Use the following command in the configuration mode:\nset interfaces ge-0/0/4 disable\ncommit" }, { "question":"disable interface ge-2/0/14", "context": "set interfaces disable", "answer": "Use the following command in the configuration mode:\nset interfaces ge-2/0/14 disable\ncommit" }, { "question":"how to disable an interface", "context": "set interfaces disable", "answer": "Use the following command in the configuration mode:\nset interfaces disable\ncommit" }, { "question":"how to enable a disabled interface", "context": "delete interfaces disable", "answer": "Use the following command in the configuration mode:\ndelete interfaces disable\ncommit" }, { "question":"enable interface ge-1/0/3", "context": "delete interfaces disable", "answer": "Use the following command in the configuration mode:\ndelete interfaces ge-1/0/3 disable\ncommit" }, { "question":"show POE system information ", "context": "show poe controller", "answer": "Use the following command in the operational mode:\nshow poe controller" }, { "question":"check the PoE power budget and consumption for the switch", "context": "show poe controller", "answer": "Use the following command in the operational mode:\nshow poe controller" }, { "question":"Determine the current PoE power consumption on the switch", "context": "show poe controller", "answer": "Use the following command in the operational mode:\nshow poe controller" }, { "question":"show the power consumption of all interfaces", "context": "show poe interface", "answer": "Use the following command in the operational mode:\nshow poe interface" }, { "question":"show the power consumption of interface ge-0/0/10", "context": "show poe interface ", "answer": "Use the following command in the operational mode:\nshow poe interface ge-0/0/10" }, { "question":"how to check the power consumption of an interface", "context": "show poe interface ", "answer": "Use the following command in the operational mode:\nshow poe interface " }, { "question":"check the maximum power provided by the interface", "context": "show poe interface", "answer": "Use the following command in the operational mode:\nshow poe interface" }, { "question":"show all records of poe telemetry of interface ge-0/0/1", "context": "show poe telemetries interface count all", "answer": "Use the following command in the operational mode:\nshow poe telemetries interface ge-0/0/1 count all" }, { "question":"how to display all records of poe telemetry of a specific interface", "context": "show poe telemetries interface count all", "answer": "Use the following command in the operational mode:\nshow poe telemetries interface count all" }, { "question":"show 2 records of POE telemetry of all interfaces", "context": "show poe telemetries interface all count ", "answer": "Use the following command in the operational mode:\nshow poe telemetries interface all count 2" }, { "question":"how to display a specific number of POE telemetry records of an interfaces", "context": "show poe telemetries interface count ", "answer": "Use the following command in the operational mode:\nshow poe telemetries interface count " }, { "question":"collect power consumptions on interface ge-0/0/5 every 10 minutes", "context": "set poe interface telemetries interval ", "answer": "Use the following command in the configuration mode:\nset poe interface ge-0/0/5 telemetries interval 10\ncommit" }, { "question":"how to modify the interval for logging telemetries per-port power consumption", "context": "set poe interface telemetries interval ", "answer": "Use the following command in the configuration mode:\nset poe interface telemetries interval \ncommit" }, { "question":"enable poe telemetry on all interfaces", "context": "set poe interface all telemetries interval ", "answer": "Use the following command in the configuration mode:\nset poe interface all telemetries interval \ncommit" }, { "question":"set the poe priority of interface ge-0/0/7 to high", "context": "set poe interface priority high", "answer": "Use the following command in the configuration mode:\nset poe interface ge-0/0/7 priority high\ncommit" } , { "question":"how to set the poe priority of interface", "context": "set poe interface priority ", "answer": "Use the following command in the configuration mode:\nset poe interface priority \ncommit" } , { "question":"set the poe priority of interface ge-0/0/6 to low", "context": "set poe interface priority low", "answer": "Use the following command in the configuration mode:\nset poe interface ge-0/0/6 priority low\ncommit" }, { "question":"display information about all interfaces participating in spanning tree protocols", "context": "show spanning-tree interface", "answer": "Use the following command in the operational mode:\nshow spanning-tree interface" }, { "question":"how to verify spanning tree interface information", "context": "show spanning-tree interface", "answer": "Use the following command in the operational mode:\nshow spanning-tree interface" }, { "question":"Display interface-level spanning-tree protocol parameters", "context": "show spanning-tree interface", "answer": "Use the following command in the operational mode:\nshow spanning-tree interface" }, { "question":"show the spanning-tree parameters of interface ge-0/0/0", "context": "show spanning-tree interface ", "answer": "Use the following command in the operational mode:\nshow spanning-tree interface ge-0/0/0" }, { "question":"how to check the spanning-tree parameters of an interface", "context": "show spanning-tree interface ", "answer": "Use the following command in the operational mode:\nshow spanning-tree interface " }, { "question":"show the blocked ports by spanning tree protocols", "context": "show spanning-tree interface | match BLK", "answer": "Use the following command in the operational mode:\n show spanning-tree interface | match BLK" }, { "question":"show the ports blocked by RSTP", "context": "show spanning-tree interface | match BLK", "answer": "Use the following command in the operational mode:\n show spanning-tree interface | match BLK" }, { "question":"How to find the root interface of the active spanning tree protocol", "context": "show spanning-tree interface | match root", "answer": "Use the following command in the operational mode:\n show spanning-tree interface | match root" }, { "question":"show spanning-tree statistics of interface ge-0/0/10", "context": "show spanning-tree statistics interface ", "answer": "Use the following command in the operational mode:\nshow spanning-tree statistics interface ge-0/0/10" }, { "question":"how to display the spanning-tree statistics of an interface", "context": "show spanning-tree statistics interface ", "answer": "Use the following command in the operational mode:\nshow spanning-tree statistics interface " }, { "question":"show spanning-tree statistics", "context": "show spanning-tree statistics", "answer": "Use the following command in the operational mode:\nshow spanning-tree statistics" }, { "question":"Show STP bridge parameters", "context": "show spanning-tree bridge", "answer": "Use the following command in the operational mode:\nshow spanning-tree bridge" }, { "question":"Display the configured and calculated parameters of the active spanning tree protocol", "context": "show spanning-tree bridge", "answer": "Use the following command in the operational mode:\nshow spanning-tree bridge" }, { "question":"How to verify spanning tree root bridge parameters", "context": "show spanning-tree bridge", "answer": "Use the following command in the operational mode:\nshow spanning-tree bridge" }, { "question":"Show Multiple Spanning Tree Protocol (MSTP) information", "context": "show spanning-tree mstp configuration", "answer": "Use the following command in the operational mode:\nshow spanning-tree mstp configuration" }, { "question":"Show known autonomous system paths", "context": "show as-path", "answer": "Use the following command in the operational mode:\nshow as-path" }, { "question":"Show autonomous-system domains", "context": "show as-path domain", "answer": "Use the following command in the operational mode:\n show as-path domain" }, { "question":"Show command-line interface settings", "context": "show cli", "answer": "Use the following command in the operational mode:\nshow cli" }, { "question":"Display ARP inspection statistics", "context": "show arp inspection statistics", "answer": "Use the following command in the operational mode:\nshow arp inspection statistics" }, { "question":"Show contents of log file", "context": "show log", "answer": "Use the following command in the operational mode:\n show log" }, { "question":"Show users currently editing configuration", "context": "status", "answer": "Use the following command in the configuration mode:\nstatus" }, { "question":"who is currently editing the configuration", "context": "status", "answer": "Use the following command in the configuration mode:\nstatus" }, { "question":"save the current configuration to the file conf.txt", "context": "save ", "answer": "Use the following command in the configuration mode:\nsave conf.txt" }, { "question":"How to save the current device configurations to a file", "context": "save ", "answer": "Use the following command in the configuration mode:\nsave " }, { "question":"save the current configuration to the file backup.txt", "context": "save ", "answer": "Use the following command in the configuration mode:\nsave backup.txt" }, { "question":"display the system alarms", "context": "show system alarms", "answer": "Use the following command in the operational mode:\n show system alarms" }, { "question":"show the system current active alarms", "context": "show system alarms", "answer": "Use the following command in the operational mode:\n show system alarms" }, { "question":"display loaded JUNOS extensions", "context": "show system software", "answer": "Use the following command in the operational mode:\n show system software" }, { "question":"Show information about all loaded JUNOS extensions", "context": "show system software", "answer": "Use the following command in the operational mode:\nshow system software" }, { "question":"Display information of all Flexible PIC Concentrators (FPCs) and PICs installed in the router or switch chassis", "context": "show chassis hardware", "answer": "Use the following command in the operational mode:\nshow chassis hardware" }, { "question":"Display a list of all Flexible PIC Concentrators (FPCs) and PICs installed in the EX3300 switch chassis", "context": "show chassis hardware", "answer": "Use the following command in the operational mode:\nshow chassis hardware" } , { "question":"Display detailed information of all FPCs and PICs installed in the EX3300 switch chassis", "context": "show chassis hardware", "answer": "Use the following command in the operational mode:\nshow chassis hardware" } , { "question":"Display status information of pic-slot 0 fpc-slot 1 in the EX3300 switch chassis", "context": "show chassis pic pic-slot fpc-slot ", "answer": "Use the following command in the operational mode:\n show chassis pic pic-slot 0 fpc-slot 1" }, { "question":"How to get status information about the PIC installed in the specified Flexible PIC Concentrator and PIC slot", "context": "show chassis pic pic-slot fpc-slot ", "answer": "Use the following command in the operational mode:\nshow chassis pic pic-slot fpc-slot " } , { "question":"display the installed X509 certificates", "context": "show system certificate", "answer": "Use the following command in the operational mode:\nshow system certificate" } , { "question":"show the installed certificates signed by the Juniper Networks certificate authority", "context": "show system certificate", "answer": "Use the following command in the operational mode:\nshow system certificate" }, { "question":"show protocols statistics", "context": "show system statistics", "answer": "Use the following command in the operational mode:\nshow system statistics" }, { "question":"Display protocols statistics", "context": "show system statistics", "answer": "Use the following command in the operational mode:\nshow system statistics" }, { "question":"show ARP protocol statistics", "context": "show system statistics arp", "answer": "Use the following command in the operational mode:\nshow system statistics arp" }, { "question":"Display ARP statistics", "context": "show system statistics arp", "answer": "Use the following command in the operational mode:\nshow system statistics arp" }, { "question":"show IEEE 802.1 Bridging protocol statistics", "context": "show system statistics bridge", "answer":"Use the following command in the operational mode:\nshow system statistics bridge" }, { "question":"display IEEE 802.1 protocol statistics", "context": "show system statistics bridge", "answer":"Use the following command in the operational mode:\nshow system statistics bridge" }, { "question":"Enable DHCP snooping on all VLANs", "context": "set ethernet-switching-options secure-access-port vlan all examine-dhcp", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port vlan all examine-dhcp\ncommit" }, { "question":"how to enable DHCP snooping for all VLANs", "context": "set ethernet-switching-options secure-access-port vlan all examine-dhcp", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port vlan all examine-dhcp\ncommit" }, { "question":"Disable DHCP snooping on all VLANs", "context": "delete ethernet-switching-options secure-access-port vlan all examine-dhcp", "answer": "Use the following commadn in the configuration mode:\ndelete ethernet-switching-options secure-access-port vlan all examine-dhcp\ncommit" }, { "question":"Enable DHCP snooping on the vlan with the ID 10", "context": "set ethernet-switching-options secure-access-port vlan examine-dhcp", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port vlan 10 examine-dhcp\ncommit" }, { "question":"delete DHCP snooping on VLAN with the ID 30", "context": "delete ethernet-switching-options secure-access-port vlan examine-dhcp", "answer": "Use the following command in the configuration mode:\ndelete ethernet-switching-options secure-access-port vlan 30 examine-dhcp\ncommit" }, { "question":"How to enable DHCP snooping on a VLAN ", "context": "set ethernet-switching-options secure-access-port vlan examine-dhcp", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port vlan examine-dhcp\ncommit" }, { "question":"How to disable DHCP snooping on a VLAN ", "context": "delete ethernet-switching-options secure-access-port vlan examine-dhcp", "answer": "Use the following command in the configuration mode:\ndelete ethernet-switching-options secure-access-port vlan examine-dhcp\ncommit" }, { "question":"Display the candidate configuration in the set format", "context": "show | display set", "answer":"Use the following command in the configuration mode:\nshow | display set" }, { "question":"Display system configuration in the set format from the operational mode", "context": "show configuration | display set", "answer": "Use the following command in the operational mode:\nshow configuration | display set" }, { "question":"Display the virtual chassis configurations", "context": "show configuration virtual-chassis", "answer":"Use the following command in the operational mode:\n show configuration virtual-chassis" }, { "question":"Display the virtual chassis configurations in set format from the operational mode", "context":"show configuration virtual-chassis | display set" , "answer": "Use the following command in the operational mode:\nshow configuration virtual-chassis | display set" }, { "question":"Enable all traceoptions for virtual chassis", "context":"set virtual-chassis traceoptions flag all" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag all\ncommit" } , { "question":"Disable all traceoptions for virtual chassis", "context":"set virtual-chassis traceoptions flag all" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag all disable\ncommit" }, { "question":"trace virtual chassis ports auto configuration", "context":"set virtual-chassis traceoptions flag auto-configuration" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag auto-configuration\ncommit" } , { "question":"Disable the virtual chassis ports auto configuration traceoption", "context":"set virtual-chassis traceoptions flag auto-configuration disable" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag auto-configuration disable\ncommit" }, { "question":"Trace the virtual chassis complete sequence number (CSN) packets", "context":"set virtual-chassis traceoptions flag csn" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag csn\ncommit" } , { "question":"Disable the virtual chassis complete sequence number (csn) packets traceoption", "context":"set virtual-chassis traceoptions flag csn disable" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag csn disable\ncommit" }, { "question":"Trace the virtual chassis dcp infrastructure configuration state ", "context":"set virtual-chassis traceoptions flag dcp-dev-state" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag dcp-dev-state\ncommit" } , { "question":"Disable the virtual chassis dcp infrastructure configuration state traceoption", "context":"set virtual-chassis traceoptions flag dcp-dev-state disable" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag dcp-dev-state disable\ncommit" }, { "question":"Trace the virtual chassis dcp infrastructure configuration ", "context":"set virtual-chassis traceoptions flag dcp-infra" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag dcp-infra\ncommit" } , { "question":"Disable the virtual chassis dcp infrastructure configuration traceoption", "context":"set virtual-chassis traceoptions flag dcp-infra disable" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag dcp-infra disable\ncommit" }, { "question":"Trace virtual chassis errors ", "context":"set virtual-chassis traceoptions flag error" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag error\ncommit" } , { "question":"Disable virtual chassis errors traceoption", "context":"set virtual-chassis traceoptions error disable" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag error disable\ncommit" }, { "question":"Trace virtual chassis graceful restart events", "context":"set virtual-chassis traceoptions flag graceful-restart" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag graceful-restart\ncommit" } , { "question":"Disable virtual chassis graceful restart events traceoption", "context":"set virtual-chassis traceoptions graceful-restart disable" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag graceful-restart disable\ncommit" }, { "question":"Trace virtual chassis hello packets", "context":"set virtual-chassis traceoptions flag hello" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag hello\ncommit" } , { "question":"Disable virtual chassis hello packets traceoption", "context":"set virtual-chassis traceoptions hello disable" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag hello disable\ncommit" }, { "question":"Trace virtual chassis kernel events", "context":"set virtual-chassis traceoptions flag krt" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag krt\ncommit" } , { "question":"Disable virtual chassis kernel events traceoption", "context":"set virtual-chassis traceoptions krt disable" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag krt disable\ncommit" }, { "question":"Trace virtual chassis link-state packets", "context":"set virtual-chassis traceoptions flag lsp" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag lsp\ncommit" } , { "question":"Disable virtual chassis link-state packets traceoption", "context":"set virtual-chassis traceoptions lsp disable" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag lsp disable\ncommit" }, { "question":"Trace virtual chassis LSP generation", "context":"set virtual-chassis traceoptions flag lsp-generation " , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag lsp-generation \ncommit" } , { "question":"Disable virtual chassis LSP generation traceoption", "context":"set virtual-chassis traceoptions lsp-generation disable" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag lsp-generation disable\ncommit" }, { "question":"Trace virtual chassis master election events", "context":"set virtual-chassis traceoptions flag me" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag me\ncommit" } , { "question":"Disable virtual chassis master election events traceoption", "context":"set virtual-chassis traceoptions me disable" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag me disable\ncommit" }, { "question":"Trace virtual chassis normal events", "context":"set virtual-chassis traceoptions flag normal" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag normal\ncommit" } , { "question":"Disable virtual chassis normal events traceoption", "context":"set virtual-chassis traceoptions normal disable" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag normal disable\ncommit" }, { "question":"Trace virtual chassis packets", "context":"set virtual-chassis traceoptions flag packets" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag packets\ncommit" } , { "question":"Disable virtual chassis packets traceoption", "context":"set virtual-chassis traceoptions packets disable" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag packets disable\ncommit" }, { "question":"Trace virtual chassis configuration parsing", "context":"set virtual-chassis traceoptions flag parse" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag parse\ncommit" } , { "question":"Disable virtual chassis configuration parsing traceoption", "context":"set virtual-chassis traceoptions parse disable" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag parse disable\ncommit" }, { "question":"Trace virtual chassis partial sequence number (PSN) packets", "context":"set virtual-chassis traceoptions flag psn" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag psn\ncommit" } , { "question":"Disable virtual chassis partial sequence number (PSN) packets traceoption", "context":"set virtual-chassis traceoptions psn disable" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag psn disable\ncommit" }, { "question":"Trace virtual chassis routing information", "context":"set virtual-chassis traceoptions flag route" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag route\ncommit" } , { "question":"Disable virtual chassis routing information traceoption", "context":"set virtual-chassis traceoptions route disable" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag route disable\ncommit" }, { "question":"Trace virtual chassis SPF events", "context":"set virtual-chassis traceoptions flag spf" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag spf\ncommit" } , { "question":"Disable virtual chassis SPF events traceoption", "context":"set virtual-chassis traceoptions spf disable" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag spf disable\ncommit" }, { "question":"Trace virtual chassis state transitions", "context":"set virtual-chassis traceoptions flag state" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag state\ncommit" } , { "question":"Disable virtual chassis state transitions traceoption", "context":"set virtual-chassis traceoptions state disable" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag state disable\ncommit" }, { "question":"Trace virtual chassis task processing", "context":"set virtual-chassis traceoptions flag task" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag task\ncommit" } , { "question":"Disable virtual chassis task processing traceoption", "context":"set virtual-chassis traceoptions task disable" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis traceoptions flag task disable\ncommit" }, { "question":"set the virtual chassis mac persistent timer to 15 min", "context":"set virtual-chassis mac-persistence-timer " , "answer": "Use the following command in the configuration mode:\nset virtual-chassis mac-persistence-timer 15\ncommit" }, { "question":"how to set the virtual chassis mac persistent timer", "context":"set virtual-chassis mac-persistence-timer " , "answer": "Use the following command in the configuration mode:\nset virtual-chassis mac-persistence-timer \ncommit" }, { "question":"set the virtual chassis mac persistent timer to 20 min", "context":"set virtual-chassis mac-persistence-timer " , "answer": "Use the following command in the configuration mode:\nset virtual-chassis mac-persistence-timer 20\ncommit" }, { "question":"allow the virtual chassis to retain MAC address when member leaves virtual chassis for 15 min", "context":"set virtual-chassis mac-persistence-timer " , "answer": "Use the following command in the configuration mode:\nset virtual-chassis mac-persistence-timer 15\ncommit" }, { "question":"allow the virtual chassis to keep the MAC address for 15 min when member leaves virtual chassis", "context":"set virtual-chassis mac-persistence-timer " , "answer": "Use the following command in the configuration mode:\nset virtual-chassis mac-persistence-timer 15\ncommit" }, { "question":"how to allow the virtual chassis to keep using the MAC address after the primary member leaves virtual chassis", "context":"set virtual-chassis mac-persistence-timer " , "answer": "Use the following command in the configuration mode:\nset virtual-chassis mac-persistence-timer \ncommit" }, { "question":"disable the virtual chassis mac persistent timer", "context":"set virtual-chassis mac-persistence-timer disable" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis mac-persistence-timer disable\ncommit" }, { "question":"prevent the virtual chassis from using the MAC address of the primary member after it leaves virtual chassis", "context":"set virtual-chassis mac-persistence-timer disable" , "answer": "Use the following command in the configuration mode:\nset virtual-chassis mac-persistence-timer disable\ncommit" }, { "question":"set the virtual chassis auto software update using the jinstall-ex-3300-12.3R6-S6-domestic-signed.tgz package", "context":"set virtual-chassis auto-sw-update package-name " , "answer": "Use the following command in the configuration mode:\nset virtual-chassis auto-sw-update package-name /var/tmp/jinstall-ex-3300-12.3R6-S6-domestic-signed.tgz\ncommit" }, { "question":"set the virtual chassis auto software update using the jinstall-ex-3300-12.3R12-S12-domestic-signed.tgz package", "context":"set virtual-chassis auto-sw-update package-name " , "answer": "Use the following command in the configuration mode:\nset virtual-chassis auto-sw-update package-name /var/tmp/jinstall-ex-3300-12.3R12-S12-domestic-signed.tgz\ncommit" }, { "question":"how to set the virtual chassis automatic software update ", "context":"set virtual-chassis auto-sw-update package-name " , "answer": "Use the following command in the configuration mode:\nset virtual-chassis auto-sw-update package-name \ncommit" }, { "question":"Enable HTTPS web management using self generated certificates", "context": "set system services web-management https system-generated-certificate\ncommit", "answer": "Use the following command in the configuration mode:\nset system services web-management https system-generated-certificate\ncommit" }, { "question":"How to enable HTTPS web management using self generated certificates", "context": "set system services web-management https system-generated-certificate\ncommit", "answer": "Use the following command in the configuration mode:\nset system services web-management https system-generated-certificate\ncommit" }, { "question":"Allow HTTPS web management using self generated certificates", "context": "set system services web-management https system-generated-certificate\ncommit", "answer": "Use the following commands in the configuration mode:\nset system services web-management https system-generated-certificate\ncommit" }, { "question":"set the HTTPS web management using self generated certificates", "context": "set system services web-management https system-generated-certificate\ncommit", "answer": "Use the following commands in the configuration mode:\nset system services web-management https system-generated-certificate\ncommit" }, { "question":"Allow NETCONF connections over SSH", "context": "set system services netconf ssh", "answer": "Use the following commands in the configuration mode:\nset system services netconf ssh\ncommit" }, { "question":"Enable NETCONF connections using SSH", "context": "set system services netconf ssh", "answer": "Use the following commands in the configuration mode:\nset system services netconf ssh\ncommit" }, { "question":"set the authentication order to TACACS+ then Radius then password", "context": "set system authentication-order [ordered-authentication-methods]", "answer": "Use the following commands in the configuration mode:\nset system authentication-order [tacplus radius password ]\ncommit" }, { "question":"set the authentication order on Juniper EX3300 to Radius, TACACS+, then password", "context": "set system authentication-order [ordered-authentication-methods]", "answer": "Use the following commands in the configuration mode:\nset system authentication-order [radius tacplus password ]\ncommit" }, { "question":"how to set the authentication methods order on Juniper EX3300", "context": "set system authentication-order [ordered-authentication-methods]", "answer": "Use the following commands in the configuration mode:\nset system authentication-order [ordered-authentication-methods]\ncommit" }, { "question":"Enable auto-snapshot when the switch boots from alternate slice", "context": "set system auto-snapshot", "answer": "Use the following commands in the configuration mode:\nset system auto-snapshot\ncommit" }, { "question":"Enable the automatic snapshot feature", "context": "set system auto-snapshot", "answer": "Use the following commands in the configuration mode:\nset system auto-snapshot\ncommit" }, { "question":"set the device to automatically fix a corrupt Junos OS file in the primary root partition", "context": "set system auto-snapshot", "answer": "Use the following commands in the configuration mode:\nset system auto-snapshot\ncommit" }, { "question":"Set the location of the switch to HR 2nd floor", "context": "set system location building floor ", "answer": "Use the following commands in the configuration mode:\nset system location building 'HR' floor '2'\ncommit" }, { "question":"Set the location of the switch to FIN building 3nd floor", "context": "set system location building floor ", "answer": "Use the following commands in the configuration mode:\nset system location building 'FIN' floor '3'\ncommit" }, { "question":"How to set the location of the switch to specific builing and floor", "context": "set system location building floor ", "answer": "Use the following commands in the configuration mode:\nset system location building floor \ncommit" }, { "question":"Display information about users who have logged in to the switch", "context": "show log user", "answer": "Use the following command in the operational mode:\nshow log user" } , { "question":"Show the log of the users who have logged in to the switch", "context": "show log user", "answer": "Use the following command in the operational mode:\nshow log user" } , { "question":"who logged in to the switch", "context": "show log user", "answer": "Use the following command in the operational mode:\nshow log user" } , { "question":"show the logging information of user alaa", "context": "show log user ", "answer": "Use the following command in the operational mode:\nshow log user alaa" } , { "question":"how to check the logging information of a user", "context": "show log user ", "answer": "Use the following command in the operational mode:\nshow log user " } , { "question":"display the content of the log file named messages", "context": "show log messages", "answer": "Use the following command in the operational mode:\nshow log messages" }, { "question":"show the messages log file", "context": "show log messages", "answer": "Use the following command in the operational mode:\nshow log messages" }, { "question":"How to see the secure access port configurations in the operational mode", "context": "show configuration ethernet-switching-options secure-access-port", "answer": "Use the following command in the operational mode:\nshow configuration ethernet-switching-options secure-access-port" }, { "question":"show the secure access port configurations in the set format", "context": "show configuration ethernet-switching-options secure-access-port | display set", "answer": "Use the following command in the operational mode:\nshow configuration ethernet-switching-options secure-access-port | display set" }, { "question":"show the secure access port configurations in the set format", "context": "show ethernet-switching-options secure-access-port | display set", "answer":"Use the following command in the configuration mode:\n show ethernet-switching-options secure-access-port | display set" }, { "question":"ping the following IP address 10.0.3.1", "context": "ping
", "answer": "Use the following command in the operational mode:\nping 10.0.3.1" }, { "question":"how to ping an IP address from the CLI", "context": "ping
", "answer": "Use the following command in the operational mode:\nping
" }, { "question":"how to ping an IP address from the configuration mode", "context": "run ping
", "answer": "Use the following command in the operational mode:\nrun ping
" }, { "question":"ping the IP 192.168.1.1", "context": "ping
", "answer": "Use the following command in the operational mode:\nping 192.168.1.1" }, { "question":"ping the following IP address 10.0.5.1", "context": "ping
", "answer": "Use the following command in the configuration mode:\nrun ping 10.0.5.1" }, { "question":"How to start the shell from the operational mode", "context": "start shell", "answer": "Use the following command in the operational mode:\nstart shell" }, { "question":"How to start the shell as the user root", "context": "start shell user ", "answer": "Use the following command in the operational mode:\nstart shell user root" }, { "question":"How to start the shell as the user sam", "context": "start shell user ", "answer": "Use the following command in the operational mode:\nstart shell user sam" }, { "question":"How to start the shell as a specific user", "context": "start shell user ", "answer": "Use the following command in the operational mode:\nstart shell user " }, { "question":"How to start the C shell from the operational mode", "context": "start shell csh", "answer": "Use the following command in the operational mode:\nstart shell csh" }, { "question":"How to start the Bourne shell from the operational mode", "context": "start shell sh", "answer": "Use the following command in the operational mode:\nstart shell sh" }, { "question":"How to run operational mode commands from the configuration mode", "context": "run ", "answer": "Use the following command from the configuration mode:\nrun " }, { "question":"Display Routing Engine status", "context": "show chassis routing-engine", "answer": "Use the following command in the operational mode:\nshow chassis routing-engine" }, { "question":"how to check the component status, temperature, and cooling system speeds of the Switch", "context": "show chassis environment", "answer":"Use the following command in the operational mode:\nshow chassis environment" }, { "question":"Display environmental information about the switch chassis", "context": "show chassis environment", "answer":"Use the following command in the operational mode:\nshow chassis environment" }, { "question":"Show all members' chassis pic-mode", "context": "show chassis pic-mode all-members", "answer": "Use the following command in the operatonal mode:\nshow chassis pic-mode all-members" }, { "question":"Display the PIC mode for all members of the Virtual Chassis configuration", "context": "show chassis pic-mode all-members", "answer": "Use the following command in the operatonal mode:\nshow chassis pic-mode all-members" }, { "question":"Show member 0 chassis pic-mode", "context": "show chassis pic-mode member ", "answer": "Use the following command in the operatonal mode:\nshow chassis pic-mode member 0" }, { "question":" Display the PIC mode of member 1 of the Virtual Chassis configuration", "context":"show chassis pic-mode member ", "answer": "Use the following command in the operatonal mode:\nshow chassis pic-mode member 1" }, { "question":" How to display the PIC mode of a specific member of the Virtual Chassis configuration", "context":"show chassis pic-mode member ", "answer": "Use the following command in the operatonal mode:\nshow chassis pic-mode member " }, { "question":"Show installed hardware components", "context": "show chassis hardware", "answer": "Use the following command in the operatonal mode:\nshow chassis hardware" }, { "question":"List the hardware version level and serial numbe of all FPCs and PICs installed in the switch chassis", "context": "show chassis hardware", "answer": "Use the following command in the operatonal mode:\nshow chassis hardware" }, { "question":"Show nonstop upgrade status of the linecard members", "context": "show chassis nonstop-upgrade", "answer": "Use the following command in the operational mode:\nshow chassis nonstop-upgrade" }, { "question":"Display the status of the Virtual Chassis members in the linecard role after the last nonstop software upgrade", "context": "show chassis nonstop-upgrade", "answer": "Use the following command in the operational mode:\nshow chassis nonstop-upgrade" }, { "question":"Display the status of the Virtual Chassis members in the linecard role after the last NSSU", "context": "show chassis nonstop-upgrade", "answer": "Use the following command in the operational mode:\nshow chassis nonstop-upgrade" }, { "question":"Show the redundant power system information", "context": "show chassis redundant-power-system", "answer": "Use the following command in the operatonal mode:\nshow chassis redundant-power-system" }, { "question": "Display informaion of the RPS connected to the switch", "context": "show chassis redundant-power-system", "answer": "Use the following command in the operatonal mode:\nshow chassis redundant-power-system" }, { "question": "Show the Redundant Power System (RBS) information", "context": "show chassis redundant-power-system", "answer": "Use the following command in the operatonal mode:\nshow chassis redundant-power-system" }, { "question":"Show LCD display content", "context": "show chassis lcd", "answer": "Use the following command in the operatonal mode:\nshow chassis lcd" }, { "question":"Display the information that appears on the LCD panel", "context": "show chassis lcd", "answer": "Use the following command in the operatonal mode:\nshow chassis lcd" }, { "question":"Show LCD active menu items", "context": "show chassis lcd menu", "answer": "Use the following command in the operatonal mode:\nshow chassis lcd menu" }, { "question":"Show LCD display for FPC slot number 1", "context": "show chassis lcd fpc-slot ", "answer": "Use the following command in the operatonal mode:\nshow chassis lcd fpc-slot 1" }, { "question":"Show LCD display for FPC slot number 0", "context": "show chassis lcd fpc-slot ", "answer": "Use the following command in the operatonal mode:\nshow chassis lcd fpc-slot 0" }, { "question":"Display the information that appears on the LCD panel for the FPC slot 0 ", "context": "show chassis lcd fpc-slot ", "answer": "Use the following command in the operatonal mode:\nshow chassis lcd fpc-slot 0" }, { "question":"how to Show the LCD display for specific FPC slot number", "context": "show chassis lcd fpc-slot ", "answer": "Use the following command in the operatonal mode:\nshow chassis lcd fpc-slot " }, { "question":"Display lcd menu options local virtual chassis member", "context": " show chassis lcd menu local", "answer": "Use the following command in the operatonal mode:\nshow chassis lcd menu local" }, { "question": "Display lcd menu options all virtual chassis members", "context": "show chassis lcd menu all-members", "answer": "Use the following command in the operatonal mode:\nshow chassis lcd menu all-members" }, { "question":"Show LED status", "context": "show chassis led", "answer": " Use the following command in the operatonal mode:\nshow chassis led" }, { "question":"How to display the LED status", "context": "show chassis led", "answer": "Use the following command in the operatonal mode:\nshow chassis led" }, { "question":"Display the status and colors of the chassis LEDs on the front panel of the switch" , "context": "show chassis led", "answer": "Use the following command in the operatonal mode:\nshow chassis led" }, { "question":"Remove all configuration information on the Routing Engines and reset all key values on the device on the switch", "context":"request system zeroize" , "answer": "Use the following command in the operatonal mode:\nrequest system zeroize" }, { "question":"Erase all data on the switch, including configuration and log files", "context":"request system zeroize" , "answer": "Use the following command in the operatonal mode:\nrequest system zeroize" }, { "question":"remove all data files and user-created files and sets the switch to the factory default configuration", "context":"request system zeroize" , "answer": "Use the following command in the operatonal mode:\nrequest system zeroize" }, { "question":"load the factory default configuration", "context":"load factory-default" , "answer": "Use the following command in the configuration mode:\nload factory-default\ncommit" }, { "question":"Override existing configuration with factory default", "context":"load factory-default" , "answer": "Use the following command in the configuration mode:\nload factory-default\ncommit" }, { "question":"Restore the default factory configuration", "context":"load factory-default" , "answer": "Use the following command in the configuration mode:\nload factory-default\ncommit" }, { "question":"show all the configuration set for interface ge-0/0/3", "context": "show | display set | match ", "answer": "Use the following command from the configuration mode:\nshow | display set | match ge-0/0/3" }, { "question":"show all the configuration set for interface ge-0/0/13", "context": "show | display set | match ", "answer": "Use the following command from the configuration mode:\nshow | display set | match ge-0/0/13" }, { "question":"show all the configuration set for interface ge-1/0/23 from the operational mode", "context": "show configuration interfaces ", "answer": "Use the following command in the operatonal mode:\nshow configuration interfaces ge-1/0/23" }, { "question":"How to show the configuration set for a specific interface", "context": "show configuration interfaces ", "answer": "Use the following command in the operatonal mode:\nshow configuration interfaces " }, { "question":"How to show all the configuration set for a specific interface", "context": "show | display set | match ", "answer": "Use the following command from the configuration mode:\nshow | display set | match " }, { "question":"Halt the system", "context": "request system halt", "answer": "Use the following command in the operatonal mode:\nrequest system halt" }, { "question":"How to halt the EX3300 switch", "context": "request system halt", "answer": "Use the following command in the operatonal mode:\nrequest system halt" }, { "question":"stop the switch software immediately", "context": "request system halt", "answer": "Use the following command in the operatonal mode:\nrequest system halt" }, { "question":"Reboot the switch", "context": "request system reboot", "answer": "Use the following command in the operatonal mode:\nrequest system reboot" }, { "question":"reboot the device software", "context": "request system reboot", "answer": "Use the following command in the operatonal mode:\nrequest system reboot" }, { "question":"Reboot all virtual chassis members", "context": "request system reboot all-members ", "answer": "Use the following command in the operatonal mode:\nrequest system reboot all-members " }, { "question":"upgrade the switch using the package /var/tmp/jinstall-ex-3300-12.3R12-S12-domestic-signed.tgz", "context": "request system software add ", "answer": "Use the following command in the operatonal mode:\nrequest system software add /var/tmp/jinstall-ex-3300-12.3R12-S12-domestic-signed.tgz" }, { "question":"Install the following package /var/tmp/jinstall-ex-3300-12.3R12-S12-domestic-signed.tgz on the EX3300 switch", "context": "request system software add ", "answer": "Use the following command in the operatonal mode:\nrequest system software add /var/tmp/jinstall-ex-3300-12.3R12-S12-domestic-signed.tgz" }, { "question":"Update the switch software image using /var/tmp/jinstall-ex-3300-12.3R6-S6-domestic-signed.tgz", "context": "request system software add ", "answer": "Use the following command in the operatonal mode:\nrequest system software add /var/tmp/jinstall-ex-3300-12.3R12-S12-domestic-signed.tgz" }, { "question":"How to upgrade the software image of the switch", "context": "request system software add ", "answer": "Use the following command in the operatonal mode:\nrequest system software add " }, { "question":"Forcibly end the user alaa CLI login session", "context": "request system logout user ", "answer": "Use the following command in the operatonal mode:\nrequest system logout user alaa" }, { "question":"End the user ali CLI login session", "context": "request system logout user ", "answer": "Use the following command in the operatonal mode:\nrequest system logout user ali" }, { "question":"Log out all sessions owned by user sami", "context": "request system logout user all", "answer": "Use the following command in the operatonal mode:\nrequest system logout user sami all" }, { "question":"Log out all sessions owned by user ahmad", "context": "request system logout user all", "answer": "Use the following command in the operatonal mode:\nrequest system logout user ahmad all" }, { "question":"dipslay the users who are currently logged in to the switch", "context": "show system users", "answer": "Use the following command in the operatonal mode:\nshow system users" }, { "question":"Show users who are currently logged in", "context": "show system users", "answer": "Use the following command in the operatonal mode:\nshow system users" }, { "question":"who are the users currently logged in", "context": "show system users", "answer": "Use the following command in the operatonal mode:\nshow system users" }, { "question":"how to check who is currently logged in to the switch", "context": "show system users", "answer": "Use the following command in the operatonal mode:\nshow system users" }, { "question":"display the usernames locked after unsuccessful login attempts", "context": "show system login lockout", "answer": "Use the following command in the operatonal mode:\nshow system login lockout" }, { "question":"Show user accounts who are not permitted to login", "context": "show system login lockout", "answer": "Use the following command in the operatonal mode:\nshow system login lockout" }, { "question":"Show locked user accounts due to unsuccessful login attempts ", "context": "show system login lockout", "answer": "Use the following command in the operatonal mode:\nshow system login lockout" }, { "question":"which users are currently locked out", "context": "show system login lockout", "answer": "Use the following command in the operatonal mode:\nshow system login lockout" }, { "question":"Clear login locks on all user acounts", "context": "clear system login lockout all", "answer": "Use the following command in the operatonal mode:\nclear system login lockout all" }, { "question":"permit lockedout users to login", "context": "clear system login lockout all", "answer": "Use the following command in the operatonal mode:\nclear system login lockout all" }, { "question":"clear login locks on user test", "context": "clear system login lockout user ", "answer": "Use the following command in the operatonal mode:\nclear system login lockout user test" }, { "question":"clear login locks on user mohammed", "context": "clear system login lockout user ", "answer": "Use the following command in the operatonal mode:\nclear system login lockout user mohammed" }, { "question":"Display the usage of Junos OS kernel memory", "context": "show system virtual-memory", "answer": "Use the following command in the operational mode:\nshow system virtual-memory" }, { "question":"Display kernel dynamic memory usage information for the local Virtual Chassis member", "context": "show system virtual-memory local", "answer": "Use the following command in the operational mode:\nshow system virtual-memory local" }, { "question":"Show time since system and processes started", "context": "show system uptime", "answer": "Use the following command in the operational mode:\nshow system uptime" }, { "question":"Display the current time and information about how long the switch, switch software, and routing protocols have been running.", "context": "show system uptime", "answer": "Use the following command in the operational mode:\nshow system uptime" }, { "question":"Display information about how long the switch, switch software, and routing protocols have been running.", "context": "show system uptime", "answer": "Use the following command in the operational mode:\nshow system uptime" } , { "question":"how to find when the system booted", "context": "show system uptime", "answer": "Use the following command in the operational mode:\nshow system uptime" }, { "question":"display automatic snapshot status information.", "context": "show system auto-snapshot", "answer": "Use the following command in the operational mode:\nshow system auto-snapshot" }, { "question":"show auto-snapshot status information", "context": "show system auto-snapshot", "answer": "Use the following command in the operational mode:\nshow system auto-snapshot" }, { "question":"display initial messages generated by the system kernel upon startup.", "context": "show system boot-messages", "answer": "Use the following command in the operational mode:\nshow system boot-messages" }, { "question":"Show boot time messages.", "context": "show system boot-messages", "answer": "Use the following command in the operational mode:\nshow system boot-messages" }, { "question":"Show messages displayed during the booting", "context": "show system boot-messages", "answer": "Use the following command in the operational mode:\nshow system boot-messages" } , { "question":"Configure the commit command to automatically perform a commit synchronize action between dual Routing Engines within the same chassis", "context": "set system commit synchronize", "answer": "Use the following command in the configuration mode:\nset system commit synchronize\n commit" }, { "question":"Allow synchronization between routing engines on the same chassis on commit", "context": "set system commit synchronize", "answer": "Use the following command in the configuration mode:\nset system commit synchronize\n commit" }, { "question":"Enable routing engines synchronization on the virtual chassis on commit", "context": "set system commit synchronize", "answer": "Use the following command in the configuration mode:\nset system commit synchronize\n commit" } , { "question":"Synchronize commit on both Routing Engines", "context": "commit synchronize", "answer": "Use the following command in the configuration mode:\ncommit synchronize" } , { "question":"commit the configuration changes to both routing engines", "context": "commit synchronize", "answer": "Use the following command in the configuration mode:\ncommit synchronize" } , { "question":"Delete login information of user mohammed", "context": "delete system login user ", "answer": "Use the following command in the configuration mode:\ndelete system login user mohammed\n commit" } , { "question":"How to delete login information of a specific user", "context": "delete system login user ", "answer": "Use the following command in the configuration mode:\ndelete system login user \ncommit" } , { "question":"delete user ahmad account", "context": "delete system login user ", "answer": "Use the following command in the configuration mode:\ndelete system login user ahmad\ncommit" } , { "question":"set system login message to \"AUTHERIZED PERSONNEL ONLY CAN ACCESS THE SYSTEM, IF YOU ARE NOT AUTHERIZED PLEASE DISCCONECT IMMEDIALTY\"", "context": "set system login message <\"login-message\">", "answer": "Use the following command in the configuration mode:\nset system login message \"AUTHERIZED PERSONNEL ONLY CAN ACCESS THE SYSTEM, IF YOU ARE NOT AUTHERISED PLEASE DISCCONECT IMMEDIALTY\"\ncommit" }, { "question":"set system login message to RESTRICTED ACCESS", "context": "set system login message <\"login-message\">", "answer": "Use the following command in the configuration mode:\nset system login message \"RESTRICTED ACCESS\"\ncommit" } , { "question":"how to set the system login messages", "context": "set system login message <\"login-message\">", "answer": "Use the following command in the configuration mode:\nset system login message <\"login-message\">\ncommit" } , { "question":"delete system login message", "context": "delete system login message", "answer": "Use the following command in the configuration mode:\ndelete system login message\ncommit" } , { "question":"remove the system login message", "context": "delete system login message", "answer": "Use the following command in the configuration mode:\ndelete system login message\ncommit" } , { "question":"make the interface range DIV-RANGE member of vlan DATA ", "context": "set interfaces interface-range unit family ethernet-switching vlan members ", "answer": "Use the following command in the configuration mode:\nset interfaces interface-range DIV-RANGE unit 0 family ethernet-switching vlan members DATA\ncommit" }, { "question":"how to make an interface range a member of a vlan", "context": "set interfaces interface-range unit family ethernet-switching vlan members ", "answer": "Use the following command in the configuration mode:\nset interfaces interface-range unit family ethernet-switching vlan members \ncommit" }, { "question":"how to assign an interface range to a specific vlan", "context": "set interfaces interface-range unit family ethernet-switching vlan members ", "answer": "Use the following command in the configuration mode:\nset interfaces interface-range unit family ethernet-switching vlan members \ncommit" }, { "question":"Assign the interface range WIRELESS-RANGE member of vlan 150 ", "context": "set interfaces interface-range unit family ethernet-switching vlan members ", "answer": "Use the following command in the configuration mode:\nset interfaces interface-range WIRELESS-RANGE unit 0 family ethernet-switching vlan members 150\ncommit" } , { "question":"Define an interface range named DATA-RANGE that consists of the interfaces ge-0/0/0 to ge-0/0/25", "context": "set interfaces interface-range member-range to ", "answer": "Use the following command in the configuration mode:\nset interfaces interface-range DATA-RANGE member-range ge-0/0/0 to ge-0/0/25\ncommit" } , { "question":"how to create an interface range", "context": "set interfaces interface-range member-range to ", "answer": "Use the following command in the configuration mode:\nset interfaces interface-range member-range to \ncommit" } , { "question":"Define an interface range named FIN-RANGE that consists of the following interfaces ge-0/0/0 to ge-0/0/15 and ge-1/0/1", "context": "set interfaces interface-range member-range to ", "answer": "Use the following command in the configuration mode:\nset interfaces interface-range FIN-RANGE member-range ge-0/0/0 to ge-0/0/15\nset interfaces interface-range FIN-RANGE member ge-1/0/1\ncommit" } , { "question":"Define an interface range named DATA-RANGE that consists of the following interfaces ge-0/0/0 to ge-0/0/25 and set the port mode of the range to access", "context": "set interfaces interface-range member-range to \nset interfaces interface-range unit family ethernet-switching port-mode access", "answer": "Use the following command in the configuration mode:\nset interfaces interface-range DATA-RANGE member-range ge-0/0/0 to ge-0/0/25\nset interfaces interface-range DATA-RANGE unit 0 family ethernet-switching port-mode access\ncommit" } , { "question":"Delete the interface range named DATA-RANGE", "context": "delete interfaces interface-range ", "answer": "Use the following command in the configuration mode:\ndelete interfaces interface-range DATA-RANGE\ncommit" } , { "question":"how to delete an interface range", "context": "delete interfaces interface-range ", "answer": "Use the following command in the configuration mode:\ndelete interfaces interface-range \ncommit" } , { "question":"Delete the interface range named CAM-RANGE", "context": "delete interfaces interface-range ", "answer": "Use the following command in the configuration mode:\ndelete interfaces interface-range CAM-RANGE\ncommit" } , { "question":"Disable DHCP snooping on CAM vlan ", "context": "set ethernet-switching-options secure-access-port vlan no-examine-dhcp", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port vlan CAM no-examine-dhcp\ncommit" } , { "question":"how to disable DHCP snooping on a vlan ", "context": "set ethernet-switching-options secure-access-port vlan no-examine-dhcp", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port vlan no-examine-dhcp\ncommit" } , { "question":"Configure storm control on all interfaces", "context": "set ethernet-switching-options storm-control interface all", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options storm-control interface all\ncommit" }, { "question":"set the storm-control bandwidth of interface xe-0/0/2 to 5000000", "context": "set ethernet-switching-options storm-control interface bandwidth ", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options storm-control interface xe-0/0/2 bandwidth 5000000\ncommit" } , { "question":"how to set the storm-control bandwidth of an interface", "context": "set ethernet-switching-options storm-control interface bandwidth ", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options storm-control interface bandwidth \ncommit" } , { "question":"delete storm control feature on all interfaces", "context": "delete ethernet-switching-options storm-control interface all", "answer": "Use the following command in the configuration mode:\ndelete ethernet-switching-options storm-control interface all\ncommit" } , { "question":"Enable ARP inspection feature on all VLANs", "context": "set ethernet-switching-options secure-access-port vlan all arp-inspection", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port vlan all arp-inspection\ncommit" } , { "question":"set the ARP inspection feature for all VLANs", "context": "set ethernet-switching-options secure-access-port vlan all arp-inspection", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port vlan all arp-inspection\ncommit" } , { "question":"Enable ARP inspection feature on VLAN 10", "context": "set ethernet-switching-options secure-access-port vlan arp-inspection", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port vlan 10 arp-inspection\ncommit" }, { "question":"how to enable ARP inspection feature on a VLAN", "context": "set ethernet-switching-options secure-access-port vlan arp-inspection", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port vlan arp-inspection\ncommit" }, { "question":"Enable ARP inspection feature on VLAN REG", "context": "set ethernet-switching-options secure-access-port vlan arp-inspection", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port vlan REG arp-inspection\ncommit" } , { "question":"delete ARP inspection feature on all VLANs", "context": "delete ethernet-switching-options secure-access-port vlan all arp-inspection", "answer": "Use the following command in the configuration mode:\ndelete ethernet-switching-options secure-access-port vlan all arp-inspection\ncommit" } , { "question":"disable ARP inspection feature on all VLANs", "context": "delete ethernet-switching-options secure-access-port vlan all arp-inspection", "answer": "Use the following command in the configuration mode:\ndelete ethernet-switching-options secure-access-port vlan all arp-inspection\ncommit" } , { "question":"disable ARP inspection feature on VLAN TEST", "context": "delete ethernet-switching-options secure-access-port vlan arp-inspection", "answer": "Use the following command in the configuration mode:\ndelete ethernet-switching-options secure-access-port vlan TEST arp-inspection\ncommit" } , { "question":"disable ARP inspection feature on VLAN cam", "context": "delete ethernet-switching-options secure-access-port vlan arp-inspection", "answer": "Use the following command in the configuration mode:\ndelete ethernet-switching-options secure-access-port vlan cam arp-inspection\ncommit" } , { "question":"how to disable ARP inspection feature on a VLAN", "context": "delete ethernet-switching-options secure-access-port vlan arp-inspection", "answer": "Use the following command in the configuration mode:\ndelete ethernet-switching-options secure-access-port vlan arp-inspection\ncommit" } , { "question":"how to power off the ex3300 switch", "context": "request system power-off", "answer": "Use the following command in the operational mode:\nrequest system power-off" } , { "question":"power off the switch", "context": "request system power-off", "answer": "Use the following command in the operational mode:\nrequest system power-off" } , { "question":"How to power off the routing engine", "context": "request system power-off", "answer": "Use the following command in the operational mode:\nrequest system power-off" } , { "question":"How to power off all chassis members", "context": "request system power-off all-members", "answer": "Use the following command in the operational mode:\nrequest system power-off all-members" } , { "question":"How to power off all chassis members in 30 mintues", "context": "request system power-off in all-members", "answer": "Use the following command in the operational mode:\nrequest system power-off in 30 all-members" } , { "question":"How to schedule a power off all chassis members", "context": "request system power-off in all-members", "answer": "Use the following command in the operational mode:\nrequest system power-off in all-members" } , { "question":"How to schedule a power off", "context": "request system power-off in ", "answer": "Use the following command in the operational mode:\nrequest system power-off in " } , { "question":"Power off all chassis members in 20 mintues and show the following message \"This switch will be powered off in 20 minutes. Please save your data and log out immediately\"", "context": "request system power-off in message all-members", "answer": "Use the following command in the operational mode:\nrequest system power-off in 20 message \"This switch will be powered off in 20 minutes. Please save your data and log out immediately\" all-members" } , { "question":"set the sflow collector IP to 10.200.1.201 and use udp port 5800", "context": "set protocols sflow collector udp-port ", "answer": "Use the following command in the configuration mode:\nset protocols sflow collector 10.200.1.201 udp-port 5800\ncommit" } , { "question":"set the sflow collector IP to 10.20.11.21 and use udp port 5800", "context": "set protocols sflow collector udp-port ", "answer": "Use the following command in the configuration mode:\nset protocols sflow collector 10.20.11.21 udp-port 5800\ncommit" } , { "question":"how to set the sflow collector IP address and port number", "context": "set protocols sflow collector udp-port ", "answer": "Use the following command in the configuration mode:\nset protocols sflow collector udp-port \ncommit" } , { "question":"set the sflow ingress sampling rate to 1000", "context": "set protocols sflow sample-rate ingress ", "answer": "Use the following command in the configuration mode:\nset protocols sflow sample-rate ingress 1000\ncommit" } , { "question":"set the sflow ingress sampling rate to 1100", "context": "set protocols sflow sample-rate ingress ", "answer": "Use the following command in the configuration mode:\nset protocols sflow sample-rate ingress 1100\ncommit" } , { "question":"how to set the sflow ingress sampling rate", "context": "set protocols sflow sample-rate ingress ", "answer": "Use the following command in the configuration mode:\nset protocols sflow sample-rate ingress \ncommit" } , { "question":"set the sflow egress sampling rate to 1100", "context": "set protocols sflow sample-rate egress ", "answer": "Use the following command in the configuration mode:\nset protocols sflow sample-rate egress 1100\ncommit" } , { "question":"set the sflow egress sampling rate to 1000", "context": "set protocols sflow sample-rate egress ", "answer": "Use the following command in the configuration mode:\nset protocols sflow sample-rate egress 1000\ncommit" } , { "question":"how to set the sflow egress sampling rate", "context": "set protocols sflow sample-rate egress ", "answer": "Use the following command in the configuration mode:\nset protocols sflow sample-rate egress \ncommit" } , { "question":"set the source IP address to be used for the sFlow datagrams to 10.100.1.12", "context": "set protocols sflow source-ip ", "answer": "Use the following command in the configuration mode:\nset protocols sflow source-ip 10.100.1.12\ncommit" } , { "question":"Configure the source IP address to be used for the sFlow datagrams to the IP 10.100.100.15", "context": "set protocols sflow source-ip ", "answer": "Use the following command in the configuration mode:\nset protocols sflow source-ip 10.100.100.15\ncommit" } , { "question":"how to configure the source IP address used for the sFlow datagrams", "context": "set protocols sflow source-ip ", "answer": "Use the following command in the configuration mode:\nset protocols sflow source-ip \ncommit" } , { "question":"set the sflow polling interval to 60", "context": "set protocols sflow polling-interval ", "answer": "Use the following command in the configuration mode:\nset protocols sflow polling-interval 60\ncommit" } , { "question":"how to configure the sflow polling interval", "context": "set protocols sflow polling-interval ", "answer": "Use the following command in the configuration mode:\nset protocols sflow polling-interval \ncommit" } , { "question":"set the sflow polling interval to 30", "context": "set protocols sflow polling-interval ", "answer": "Use the following command in the configuration mode:\nset protocols sflow polling-interval 30\ncommit" } , { "question":"Enable sFlow protocol on interface ge-0/0/0", "context": "set protocols sflow interfaces ", "answer": "Use the following command in the configuration mode:\nset protocols sflow interfaces ge-0/0/0\ncommit" } , { "question":"how to enable sFlow protocol on an interface", "context": "set protocols sflow interfaces ", "answer": "Use the following command in the configuration mode:\nset protocols sflow interfaces \ncommit" } , { "question":"Enable sFlow protocol on interface ge-0/0/8", "context": "set protocols sflow interfaces ", "answer": "Use the following command in the configuration mode:\nset protocols sflow interfaces ge-0/0/8\ncommit" } , { "question":"disable sFlow protocol on interface ge-0/0/8", "context": "delete protocols sflow interfaces ", "answer": "Use the following command in the configuration mode:\ndelete protocols sflow interfaces ge-0/0/8\ncommit" } , { "question":"disable sFlow protocol on interface ge-0/0/18", "context": "delete protocols sflow interfaces ", "answer": "Use the following command in the configuration mode:\ndelete protocols sflow interfaces ge-0/0/18\ncommit" } , { "question":"how to disable sFlow protocol on an interface", "context": "delete protocols sflow interfaces ", "answer": "Use the following command in the configuration mode:\ndelete protocols sflow interfaces \ncommit" } , { "question":"delete sFlow protocol configuration on interface ge-1/0/2", "context": "delete protocols sflow interfaces ", "answer": "Use the following command in the configuration mode:\ndelete protocols sflow interfaces ge-1/0/2\ncommit" } , { "question":"Enable sFlow protocol on interface ge-0/0/8 and ge-1/0/1", "context": "set protocols sflow interfaces ", "answer": "Use the following command in the configuration mode:\nset protocols sflow interfaces ge-0/0/8\nset protocols sflow interfaces ge-1/0/1\ncommit" } , { "question":"disable sflow protocol", "context": "delete protocols sflow", "answer": "Use the following command in the configuration mode:\ndelete protocols sflow\ncommit" } , { "question":"disable network monitoring using sflow protocol", "context": "delete protocols sflow", "answer": "Use the following command in the configuration mode:\ndelete protocols sflow\ncommit" } , { "question":"delete all sflow protocol configurations", "context": "delete protocols sflow", "answer": "Use the following command in the configuration mode:\ndelete protocols sflow\ncommit" } , { "question":"show sflow configurations in the set format from the configuration mode", "context": "show | display set | match sflow", "answer": "Use the following command in the configuration mode:\n show | display set | match sflow" } , { "question":"show sflow configurations in the set format from the operational mode", "context": "show configuration protocols sflow | display set", "answer": "Use the following command in the operational mode:\n show configuration protocols sflow | display set" } , { "question":"show sflow configurations from the operational mode", "context": "show configuration protocols sflow", "answer": "Use the following command in the operational mode:\n show configuration protocols sflow" } , { "question":"How to verify the status of sFlow", "context": "show sflow", "answer": "Use the following command in the operational mode:\nshow sflow" } , { "question":"display the status of sFlow", "context": "show sflow", "answer": "Use the following command in the operational mode:\nshow sflow" } , { "question":"On which interfaces sflow is enabled", "context": "show sflow interface", "answer": "Use the following command in the operational mode:\nshow sflow interface" } , { "question":"Display the interfaces on which sFlow is enabled and the sampling parameters for all interfaces", "context": "show sflow interface", "answer": "Use the following command in the operational mode:\nshow sflow interface" } , { "question":"how to add the comment\"deleted commit synchronize\" to the commit command", "context": "commit comment <\"string-comment\">", "answer": "Use the following command in the configuration mode:\ncommit comment \"deleted commit synchronize\"" } , { "question":"how to add a comment to the commit command", "context": "commit comment <\"string-comment\">", "answer": "Use the following command in the configuration mode:\ncommit comment <\"string-comment\">" } , { "question":"How to change the host name from MAIN_SW to FIN_SW", "context": "replace pattern with ", "answer": "Use the following command in the configuration mode:\nreplace pattern MAIN_SW with FIN_SW\ncommit" } , { "question":"rename the host name from MAIN_SW to FIN_SW", "context": "replace pattern with ", "answer": "Use the following command in the configuration mode:\nreplace pattern MAIN_SW with FIN_SW\ncommit" } , { "question":"Change the IP 10.200.1.1 to 10.200.2.1", "context": "replace pattern with ", "answer": "Use the following command in the configuration mode:\nreplace pattern 10.200.1.1 with 10.200.2.1\ncommit" } , { "question":"How to change the IP 10.200.10.1 to 10.200.2.11", "context": "replace pattern with ", "answer": "Use the following command in the configuration mode:\nreplace pattern 10.200.10.1 with 10.200.2.11\ncommit" } , { "question":"set a mac moving limit of 5 on vlan 10 and generate a systme log entry whenever the limit is reached ", "context": "set ethernet-switching-options secure-access-port vlan mac-move-limit action log", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port vlan 10 mac-move-limit 5 action log\ncommit" } , { "question":"set a mac moving limit of 3 on vlan 20", "context": "set ethernet-switching-options secure-access-port vlan mac-move-limit ", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port vlan 20 mac-move-limit 3\ncommit" } , { "question":"set a mac moving limit of 2 on vlan HR ", "context": "set ethernet-switching-options secure-access-port vlan mac-move-limit ", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port vlan HR mac-move-limit 2\ncommit" } , { "question":"how to configure a mac moving limit on a vlan", "context": "set ethernet-switching-options secure-access-port vlan mac-move-limit ", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port vlan mac-move-limit \ncommit" } , { "question":"set a mac moving limit of 5 on vlan FIN and shutdown the violating interface ", "context": "set ethernet-switching-options secure-access-port vlan mac-move-limit action shutdown", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port vlan FIN mac-move-limit 5 action shutdown\ncommit" } , { "question":"Do not allow a device to change the port it is connected to more than twice a second", "context": "set ethernet-switching-options secure-access-port vlan mac-move-limit ", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port vlan mac-move-limit 2\ncommit" } , { "question":"limit the number of MAC movements that can be made by individual MAC addresses within all VLANs to 2", "context": "set ethernet-switching-options secure-access-port vlan all mac-move-limit ", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port vlan all mac-move-limit 2 \ncommit" } , { "question":"limit the number of MAC movements that can be made by individual MAC addresses within VLAN FIN to 1", "context": "set ethernet-switching-options secure-access-port vlan mac-move-limit ", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port vlan FIN mac-move-limit 1 \ncommit" } , { "question":"Do not allow mac movements in VLAN 10", "context": "set ethernet-switching-options secure-access-port vlan mac-move-limit 1", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port vlan 10 mac-move-limit 1 \ncommit" } , { "question":"Delete mac-move-limit on VLAN 40", "context": "delete ethernet-switching-options secure-access-port vlan mac-move-limit", "answer": "Use the following command in the configuration mode:\ndelete ethernet-switching-options secure-access-port vlan 40 mac-move-limit\ncommit" } , { "question":"Allow each interface on the EX3300 switch to connect to one device only, and shutdown the interface if a violation occur", "context": "set ethernet-switching-options secure-access-port interface all mac-limit action shutdown", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface all mac-limit 1 action shutdown\ncommit" } , { "question":"how to set up a mac limit on an interface and shutdown the interface in case of a violation", "context": "set ethernet-switching-options secure-access-port interface mac-limit action shutdown", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface mac-limit action shutdown\ncommit" } , { "question":"Allow interface ge-0/0/10 on the EX3300 switch to connect to one device only, and shutdown the interface if a violation occur", "context": "set ethernet-switching-options secure-access-port interface ge-0/0/10 mac-limit action shutdown", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface ge-0/0/10 mac-limit 1 action shutdown\ncommit" } , { "question":"set a mac limit of 1 on interface ge-0/0/11 and shutdown the interface if a violation occur", "context": "set ethernet-switching-options secure-access-port interface ge-0/0/11 mac-limit action shutdown", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface ge-0/0/11 mac-limit 1 action shutdown\ncommit" } , { "question":"set a mac limit of 1 on all interfaces and shutdown the interface if a violation occur", "context": "set ethernet-switching-options secure-access-port interface all mac-limit action shutdown", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface all mac-limit 1 action shutdown\ncommit" } , { "question":"set a mac limit of 2 on all interfaces and drop the packets received at the interface if a violation occur", "context": "set ethernet-switching-options secure-access-port interface all mac-limit action drop", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface all mac-limit 2 action drop\ncommit" } , { "question":"how to set a mac limit on an interface and drop the packets received at the interface if a violation occur", "context": "set ethernet-switching-options secure-access-port interface all mac-limit action drop", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface all mac-limit action drop\ncommit" } , { "question":"set a mac limit of 3 on interface ge-0/0/13 and drop the packets received at the interface if a violation occur", "context": "set ethernet-switching-options secure-access-port interface mac-limit action drop", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface ge-0/0/13 mac-limit 3 action drop\ncommit" } , { "question":"put a mac limit of 4 on interface ge-0/0/15 and set the action to log", "context": "set ethernet-switching-options secure-access-port interface mac-limit action log", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface ge-0/0/15 mac-limit 4 action log\ncommit" } , { "question":"how to set a mac limit on an interface and set the action to log on violations", "context": "set ethernet-switching-options secure-access-port interface mac-limit action log", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface mac-limit action log\ncommit" } , { "question":"put a mac limit of 1 on interface ge-0/0/15 and log the event when the mac limit is exceeded", "context": "set ethernet-switching-options secure-access-port interface mac-limit action log", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface ge-0/0/15 mac-limit 1 action log\ncommit" }, { "question":"limit the number of mac addresses that can be learned on interface ge-1/0/5 to 2 ", "context": "set ethernet-switching-options secure-access-port interface mac-limit action none", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface ge-1/0/5 mac-limit 2 action none\ncommit" } , { "question":"enable sticky mac on interface ge-0/0/10 ", "context": "set ethernet-switching-options secure-access-port interface persistent-learning", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface ge-0/0/10 persistent-learning\ncommit" } , { "question":"enable persistent mac learning on interface ge-0/0/9 ", "context": "set ethernet-switching-options secure-access-port interface persistent-learning", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface ge-0/0/9 persistent-learning\ncommit" } , { "question":"delete the persistent mac learning on interface ge-0/0/9 ", "context": "delete ethernet-switching-options secure-access-port interface persistent-learning", "answer": "Use the following command in the configuration mode:\ndelete ethernet-switching-options secure-access-port interface ge-0/0/9 persistent-learning\ncommit" } , { "question":"remove the persistent mac learning on interface ge-0/0/19 ", "context": "delete ethernet-switching-options secure-access-port interface persistent-learning", "answer": "Use the following command in the configuration mode:\ndelete ethernet-switching-options secure-access-port interface ge-0/0/19 persistent-learning\ncommit" } , { "question":"Allow interface ge-2/0/1 to keep the learned MAC address even after the switche restarts", "context": "set ethernet-switching-options secure-access-port interface persistent-learning", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface ge-2/0/1 persistent-learning\ncommit" } , { "question":"how to set an interfacevto keep the learned MAC address even after the switche restarts", "context": "set ethernet-switching-options secure-access-port interface persistent-learning", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface persistent-learning\ncommit" } , { "question":"Enable persistent mac learning on interface ge-0/0/0", "context": "set ethernet-switching-options secure-access-port interface persistent-learning", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface ge-0/0/0 persistent-learning\ncommit" } , { "question":"how to configure persistent mac learning on an interface", "context": "set ethernet-switching-options secure-access-port interface persistent-learning", "answer": "Use the following command in the configuration mode:\nset ethernet-switching-options secure-access-port interface persistent-learning\ncommit" } , { "question":"How to check the correctness of the configuration before commiting them", "context": "commit check", "answer": "Use the following command in the configuration mode:\ncommit check" } , { "question":"How to verify the correctness of the candidate configurations before commit", "context": "commit check", "answer": "Use the following command in the configuration mode:\ncommit check" } , { "question":"check the correctness of the candidate configurations", "context": "commit check", "answer": "Use the following command in the configuration mode:\ncommit check" } , { "question":"How to verify if a commit is pending in the operational mode", "context": "show system commit", "answer": "Use the following command in the operational mode:\nshow system commit" } , { "question":"How to verify if a commit is pending in the configuration mode", "context": "run show system commit", "answer": "Use the following command in the configuration mode:\nrun show system commit" } , { "question":"How to see what commits are scheduled from the configuration mode", "context": "run show system commit", "answer": "Use the following command in the configuration mode:\nrun show system commit" } , { "question":"Show commit history", "context": "show system commit", "answer": "Use the following command in the operational mode:\nshow system commit" } , { "question":"Show pending commits", "context": "show system commit", "answer": "Use the following command in the operational mode:\nshow system commit" } , { "question":"Show the pending commits and commit history", "context": "show system commit", "answer": "Use the following command in the operational mode:\nshow system commit" } , { "question":"How to cancel scheduled commits", "context": "clear system commit", "answer": "Use the following command in the operational mode:\nclear system commit" } , { "question":"How to delete pending commits", "context": "clear system commit", "answer": "Use the following command in the operational mode:\nclear system commit" } , { "question":"commit the current candidate configuration at 13:00:00", "context": "commit at