Datasets:
dheeraj1508
/
Telecom

Dataset card Data Studio Files Community
2
text
stringlengths
318
2.71k
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the requirement for network traffic patterns in service capabilities? option 1: To consider the overheads and signalling surge caused by frequent transmissions of large amounts of data option 2: To consider the discontinuous and symmetric nature of most teleservices and user applications option 3: To consider the discontinuous and asymmetric nature of most teleservices, multimedia services, and user applications option 4: To consider the continuous and symmetric nature of most teleservices and user applications ### Response: option 3: To consider the discontinuous and asymmetric nature of most teleservices, multimedia services, and user applications explanation :Service capabilities should take into account the discontinuous and asymmetric nature of most teleservices, multimedia services, and user applications to make efficient use of network resources.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications Which conditions must be satisfied for traffic steering from E-UTRAN to WLAN? option 1: RSRPmeas < ThreshServingOffloadWLAN, LowP and ChannelUtilizationWLAN < ThreshChUtilWLAN, Low option 2: RSRQmeas < ThreshServingOffloadWLAN, LowQ and BackhaulRateDlWLAN > ThreshBackhRateDLWLAN, High option 3: RSRPmeas > ThreshServingOffloadWLAN, HighP and BackhaulRateUlWLAN > ThreshBackhRateULWLAN, High option 4: ChannelUtilizationWLAN > ThreshChUtilWLAN, High and WLANRSSI < ThreshWLANRSSI, Low option 5: RSRPmeas < ThreshServingOffloadWLAN, LowP and WLANRSSI > ThreshWLANRSSI, High ### Response: option 1: RSRPmeas < ThreshServingOffloadWLAN, LowP and ChannelUtilizationWLAN < ThreshChUtilWLAN, Low explanation :For traffic steering from E-UTRAN to WLAN, the conditions RSRPmeas < ThreshServingOffloadWLAN, LowP and ChannelUtilizationWLAN < ThreshChUtilWLAN, Low must be satisfied.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What are the characteristics of the interfering signals for E-UTRA SAN? option 1: A PDSCH containing data and reference symbols option 2: A PUSCH containing data and reference symbols option 3: A NPUSCH containing data and reference symbols option 4: A PRACH containing data and reference symbols ### Response: option 2: A PUSCH containing data and reference symbols explanation :For E-UTRA SAN, the interfering signal shall be a PUSCH containing data and reference symbols.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the purpose of integrity protection in NR connected to 5GC security? option 1: Provides user data confidentiality option 2: Provides user data integrity protection option 3: Provides signaling data confidentiality option 4: Provides signaling data integrity protection option 5: Ensures physical protection of data handling ### Response: option 4: Provides signaling data integrity protection explanation :Integrity protection in NR connected to 5GC security provides signaling data integrity protection.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications When does the NG-RAN perform NG-RAN paging before reporting the UE's location? option 1: When the UE is in RRC_CONNECTED state option 2: When the UE is in RRC_INACTIVE state option 3: When the NG-RAN receives Location Reporting Control message indicating single stand-alone report option 4: When the NG-RAN receives Location Reporting Control message indicating continuous reporting option 5: When PSCell reporting is requested and the PSCell ID is known ### Response: option 3: When the NG-RAN receives Location Reporting Control message indicating single stand-alone report explanation :When the UE is in CM-CONNECTED state with RRC_INACTIVE state and the NG-RAN receives a Location Reporting Control message from the AMF indicating single stand-alone report, the NG-RAN performs NG-RAN paging before reporting the UE's location.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the key characteristic of a roaming broker enabled Home Environment? option 1: It has a direct commercial agreement with different serving networks. option 2: It interworks with one or more serving network operators. option 3: It uses fraud and cost control mechanisms to ensure charges do not exceed credit limits. option 4: It routes registration requests to its serving networks. option 5: It is capable of operating as a roaming broker. ### Response: option 5: It is capable of operating as a roaming broker. explanation :The key characteristic of a roaming broker enabled Home Environment is that it is capable of operating as a roaming broker.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards overview Which specifications define the Network Resource Model (NRM) information service and solution set for 5G networks and network slicing? option 1: TS 28.541, TS 28.623, TS 28.622 option 2: TS 28.554, TS 28.550, TS 28.552 option 3: TS 28.540, TS 28.658, TS 28.626 option 4: TS 28.531, TS 28.532, TS 28.533 option 5: TS 28.541, TS 28.540, TS 28.658 ### Response: option 1: TS 28.541, TS 28.623, TS 28.622 explanation :The Network Resource Model (NRM) information service and solution set for 5G networks and network slicing are defined in TS 28.541, TS 28.623, and TS 28.622.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What does the Timing Delta MAC CE indicate to an IAB-node? option 1: Time difference between DU transmission and IAB-MT reception option 2: Time difference between IAB-MT reception and transmission option 3: Timing advance offset value for a serving cell option 4: Timing Case Indication for a serving cell ### Response: option 1: Time difference between DU transmission and IAB-MT reception explanation :The Timing Delta MAC CE indicates the time difference between DU transmission of a signal from the serving cell and the reception of the signal by the IAB-MT.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications Is supporting periodic location reporting a requirement for Emergency Services? option 1: Yes, it is a requirement option 2: No, it is not a requirement option 3: It depends on asset management services option 4: It depends on the PLMN operator option 5: It depends on the Privacy Exception List ### Response: option 2: No, it is not a requirement explanation :There is no requirement for the PLMN to support periodic location reporting for Emergency Services.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the purpose of fraud control in the home environment? option 1: To collect charging information from serving networks option 2: To notify the customer care centre about charge thresholds option 3: To process charging information in real time option 4: To set limits for accumulated charges ### Response: option 2: To notify the customer care centre about charge thresholds explanation :The purpose of fraud control in the home environment is to notify the customer care centre about charge thresholds.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards overview Which feature in Rel-16 allows transmission of uplink data payload without performing random access procedures? option 1: UE-group wake-up signals (GWUS) option 2: Mobile-terminated early data transmission (MT-EDT) option 3: Support for Preconfigured uplink resources (PUR) in idle mode option 4: Scheduling of multiple DL/UL transport blocks with single DCI option 5: Presence of NRS on a non-anchor carrier for paging ### Response: option 3: Support for Preconfigured uplink resources (PUR) in idle mode explanation :The feature Support for Preconfigured uplink resources (PUR) in idle mode allows uplink transmission without performing random access procedures.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards overview What is the main goal of enabling 5G LAN-type services and virtual networks? option 1: To provide long distance access and mobility option 2: To offer private communication using IP and/or non-IP type communications option 3: To support 5G LAN-virtual networks option 4: To enhance the security and privacy of LAN services ### Response: option 2: To offer private communication using IP and/or non-IP type communications explanation :The main goal of enabling 5G LAN-type services and virtual networks is to offer private communication using IP and/or non-IP type communications.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards overview What is the key functionality introduced for prioritization between overlapping uplink resources of one UE in the 5G Core network? option 1: Support for up to eight simultaneously active semi-persistent scheduling (SPS) configurations option 2: Support for accurate reference timing delivery option 3: Support for prioritization between overlapping uplink resources of one UE option 4: Support for multiple active configured grant configurations for a BWP option 5: Support for PDCP packet duplication enhancements ### Response: option 3: Support for prioritization between overlapping uplink resources of one UE explanation :The key functionality introduced for prioritization between overlapping uplink resources of one UE in the 5G Core network is support for prioritization between overlapping uplink resources of one UE.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards overview What action does the network take if a QCI-1 bearer setup request for VoLTE is rejected during a terminating session? option 1: The call will be dropped option 2: The network will retry the call setup over CS domain option 3: The call will fallback to 2/3G in weak coverage areas option 4: The network will initiate a handover to a stronger LTE signal ### Response: option 2: The network will retry the call setup over CS domain explanation :If a QCI-1 bearer setup request for VoLTE is rejected during a terminating session, the network will retry the call setup over CS domain.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What does network diagnostics aim to achieve? option 1: Early detection of faults option 2: Evaluation of impact on the service/network option 3: Clear explanations of failures option 4: Suggestion of corrective actions option 5: All of the above ### Response: option 5: All of the above explanation :Network diagnostics aims to achieve early detection of faults, evaluation of their impact, clear explanations of failures, and suggestion of corrective actions.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards overview What is the purpose of load-balancing steering mode enhancements? option 1: To provide better network performance measurements option 2: To prioritize non-3GPP access over 3GPP access in load balancing option 3: To enable the UE and UPF to freely select split percentages for each access type option 4: To enhance the functionality of the AMF ### Response: option 3: To enable the UE and UPF to freely select split percentages for each access type explanation :In Rel-17, load-balancing steering mode enhancements allow the UE and UPF to freely and independently select their own percentages for each access type, maximizing the aggregated throughput.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the maximum number of CBR range configurations for sidelink communication congestion control? option 1: 8 option 2: 7 option 3: 16 option 4: 15 option 5: 12 ### Response: option 1: 8 explanation :The maximum number of CBR range configurations for sidelink communication congestion control is 8.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What information is included in the Location Report message when the NG-RAN detects that the UE has moved out of or into multiple areas of interest? option 1: UE Location option 2: UE Presence in Area Of Interest option 3: Request Reference ID option 4: All of the above option 5: None of the above ### Response: option 4: All of the above explanation :When the NG-RAN detects that the UE has moved out of or into multiple areas of interest, it sends multiple pairs of UE Presence in the Area Of Interest and the Request Reference ID in one Location Report message to the AMF.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications Which satellite access network type has the lowest end-to-end latency requirement in a 5G system? option 1: GEO based satellite access option 2: MEO based satellite access option 3: LEO based satellite access option 4: All have the same end-to-end latency requirement ### Response: option 3: LEO based satellite access explanation :LEO based satellite access has the lowest end-to-end latency requirement in a 5G system.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications Which standard defines the integration of the 5G System into a TSN data network (DN)? option 1: TS 23.040 option 2: TS 23.273 option 3: TS 23.502 option 4: TS 23.540 option 5: IEEE Std 802.1Q ### Response: option 5: IEEE Std 802.1Q explanation :Integration of the 5G System into a TSN data network (DN) is specified in IEEE Std 802.1Q.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the on-duration of DRX? option 1: The duration that the UE monitors PDCCH option 2: The duration until a retransmission can be expected option 3: The duration that the UE waits for, after waking up, to receive PDCCHs option 4: The total duration that the UE monitors PDCCH ### Response: option 3: The duration that the UE waits for, after waking up, to receive PDCCHs explanation :The on-duration of DRX is the duration that the UE waits for, after waking up, to receive PDCCHs.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What inputs are required for the Nmfaf_3caDataManagement_Notify service operation? option 1: Data Consumer or Analytics Consumer Information, Transaction Reference Id option 2: Notification Correlation Information option 3: Requested Data with timestamp or Analytics with timestamp, Fetch Instructions option 4: Set of Fetch Correlation ID(s) ### Response: option 2: Notification Correlation Information explanation :Notification Correlation Information is required as an input for the Nmfaf_3caDataManagement_Notify service operation.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards overview Which 3GPP working group is responsible for defining the security aspects of LTE based V2X communication? option 1: SA WG1 option 2: SA WG2 option 3: SA WG3 option 4: CT WG1 option 5: CT WG3 ### Response: option 3: SA WG3 explanation :SA WG3 is responsible for specifying the security aspects for LTE based V2X communication.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards overview What are the data services included in MCData in Release 14? option 1: Short message service only option 2: File transfer service only option 3: Both short message service and file transfer service option 4: Email service ### Response: option 3: Both short message service and file transfer service explanation :MCData in Release 14 includes a short message service and a file transfer service.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the purpose of service continuity in the Evolved Packet System? option 1: To optimize routing for user plane traffic option 2: To support mobility within and across access systems option 3: To minimize packet loss during inter- and/or intra-access technology changes option 4: To provide continuous service during and following changes of access systems option 5: To support simultaneous usage of multiple accesses ### Response: option 4: To provide continuous service during and following changes of access systems explanation :Service continuity ensures that service is maintained during and following changes of access systems.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What does the SMF do when it receives the enabling request for analytics information exposure from a UE? option 1: Subscribes to the Analytics ID for the UE option 2: Checks if it has already subscribed to the Analytics ID for other UEs option 3: Unsubscribes from the Analytics ID for the UE option 4: Requests analytics information from the NWDAF option 5: Includes an Accept or Reject to the enabling request ### Response: option 2: Checks if it has already subscribed to the Analytics ID for other UEs explanation :The SMF checks if it has already subscribed to the Analytics ID related to the analytics information exposure before subscribing for the UE.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What can the user change in the privacy exception list? option 1: The LCS Client and/or group of LCS Clients list option 2: The codeword option 3: The requestor option 4: The service types option 5: All of the above ### Response: option 5: All of the above explanation :The user can change the LCS Client and/or group of LCS Clients list, the codeword, the requestor, the service types, and the target subscriber notification setting in the privacy exception list.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What does a '1' value for a bit in the TRS availability indication field indicate? option 1: Change to a current assumption for the availability of TRS resource sets option 2: No change to the availability of TRS resource sets option 3: Unavailability of associated TRS resource sets option 4: Validity of TRS resource sets option 5: Presence of associated TRS resource sets ### Response: option 5: Presence of associated TRS resource sets explanation :A '1' value for a bit in the TRS availability indication field indicates the presence of associated TRS resource sets.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the purpose of transferring CDRs via Bx? option 1: To transfer CDRs from CDF to CGF for processing. option 2: To transfer CDRs from CGF to BD for persistent storage. option 3: To transfer CDRs from CDF to CTF for charging data transfer. option 4: To transfer CDRs from OCF to OCS for online charging. ### Response: option 2: To transfer CDRs from CGF to BD for persistent storage. explanation :The CGF is responsible for persistent CDR storage, for preparing CDR files and transferring them to the BD via the Bx reference point.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the purpose of spreading in PUCCH formats 3 and 4? option 1: To increase the bandwidth of the PUCCH transmission. option 2: To enhance the orthogonality of the transmitted symbols. option 3: To improve the immunity of the transmitted signal to multipath fading. option 4: To reduce the inter-UE interference in the PUCCH transmission. ### Response: option 2: To enhance the orthogonality of the transmitted symbols. explanation :Spreading is applied in PUCCH formats 3 and 4 to enhance the orthogonality of the transmitted symbols. This helps to reduce the inter-UE interference and improve the reliability of the PUCCH transmission.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications How does the NWDAF collect input data for PDU Session traffic analytics? option 1: Directly from the UPF using the 'UserDataUsageMeasures' event exposure event. option 2: Indirectly via the SMF. option 3: Both options 1 and 2. option 4: None of the above. ### Response: option 3: Both options 1 and 2. explanation :The NWDAF collects input data for PDU Session traffic analytics either directly from the UPF using the 'UserDataUsageMeasures' event exposure event or indirectly via the SMF.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications Which of the following options does NWDAF collect input data from? option 1: OAM option 2: NRF option 3: AMF option 4: All of the above ### Response: option 4: All of the above explanation :NWDAF can collect input data from OAM, NRF, AMF, and other relevant sources to derive slice load analytics.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards overview What is the purpose of the xMB API? option 1: To define the reference point specification for MBMS option 2: To handle packet losses in MBMS option 3: To manage content providers in MBMS option 4: To control MBMS delivery procedures option 5: To provide extended control features for MC Services ### Response: option 4: To control MBMS delivery procedures explanation :The xMB API offers a simple interface to control the MBMS delivery procedure and ingest data to be delivered via MBMS.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the purpose of Indirect 3GPP Communication? option 1: To connect an Evolved ProSe Remote UE to the 3GPP network via an Evolved ProSe UE-to-Network Relay option 2: To enable GSM and UMTS communication option 3: To support small data services for an Evolved ProSe Remote UE option 4: To provide resource efficient management of shared radio spectrum ### Response: option 1: To connect an Evolved ProSe Remote UE to the 3GPP network via an Evolved ProSe UE-to-Network Relay explanation :Indirect 3GPP Communication enables a remote UE to connect to the 3GPP network via a relay.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the SNR target for higher CBWs assuming 16 and 20 dB? option 1: 14.4 dB option 2: 18.6 dB option 3: 16 dB option 4: 20 dB ### Response: option 3: 16 dB explanation :The SNR target for higher CBWs assuming 16 dB is used.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications How is a 5G VN group identified? option 1: By the UE's GPSI option 2: By the AF using the External Group ID option 3: By the NEF using the Internal Group ID option 4: By the UDM using the Internal Group ID option 5: By the PCF using the External Group ID ### Response: option 2: By the AF using the External Group ID explanation :A 5G VN group is identified by the AF using the External Group ID, which is provided to the UDM to map it to the Internal Group ID.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications Which message contains the low layer configuration for the UE? option 1: INITIAL UE MESSAGE option 2: DL RRC MESSAGE TRANSFER option 3: RRC CONNECTION SETUP COMPLETE option 4: UL RRC MESSAGE TRANSFER option 5: INITIAL UL RRC MESSAGE TRANSFER ### Response: option 5: INITIAL UL RRC MESSAGE TRANSFER explanation :The gNB-DU includes the low layer configuration for the UE in the INITIAL UL RRC MESSAGE TRANSFER message.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What are the two main groups of logical channels in the MAC sublayer? option 1: Broadcast channels and Dedicated channels option 2: Control channels and Traffic channels option 3: Physical channels and Transport channels option 4: Scheduling channels and Error correction channels option 5: Primary channels and Secondary channels ### Response: option 2: Control channels and Traffic channels explanation :The two main groups of logical channels in the MAC sublayer are Control channels and Traffic channels.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards overview What is the purpose of the feature 'Multi-server bearer coordination' for MBMS usage in MC services? option 1: Allowing a single MC service server to manage all MBMS media transmission option 2: Activating an MBMS bearer and notifying relevant events option 3: Application layer FEC to recover packet losses option 4: Applying header compression over MBMS transmissions option 5: Supporting multiple security domains ### Response: option 1: Allowing a single MC service server to manage all MBMS media transmission explanation :The purpose of the feature 'Multi-server bearer coordination' is to allow a single MC service server to manage all the MBMS media transmission for all groups and users within a particular MBMS service area.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is VarMeasIdleConfig used for? option 1: To configure the measurements to be performed by the UE while in RRC_IDLE or RRC_INACTIVE option 2: To configure the reporting of measurements performed by the UE while in RRC_IDLE or RRC_INACTIVE option 3: To configure the logging of measurements performed by the UE while in RRC_IDLE or RRC_INACTIVE option 4: To configure the mobility behavior of the UE while in RRC_IDLE or RRC_INACTIVE option 5: To configure the random-access procedure of the UE while in RRC_IDLE or RRC_INACTIVE ### Response: option 1: To configure the measurements to be performed by the UE while in RRC_IDLE or RRC_INACTIVE explanation :VarMeasIdleConfig includes the configuration of the measurements to be performed by the UE while in RRC_IDLE or RRC_INACTIVE for NR inter-frequency and inter-RAT (i.e. EUTRA) measurements.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the role of a Relay Node (RN) in E-UTRAN? option 1: To terminate the radio protocols of the E-UTRA radio interface option 2: To manage the EPS bearers and session for the RN option 3: To handle the S1 and X2 interfaces between the DeNB and the MME option 4: To support PWS towards UEs option 5: To perform the RRC connection establishment for the RN ### Response: option 1: To terminate the radio protocols of the E-UTRA radio interface explanation :The RN terminates the radio protocols of the E-UTRA radio interface.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the purpose of S-NSSAI based congestion control? option 1: To restrict data transfer via Control Plane CIoT 5GS Optimization option 2: To avoid and handle NAS signalling congestion for UEs with a back-off timer associated with or without an S-NSSAI option 3: To handle overload situations in the SMF option 4: To apply congestion control to a specific group of UEs ### Response: option 2: To avoid and handle NAS signalling congestion for UEs with a back-off timer associated with or without an S-NSSAI explanation :S-NSSAI based congestion control is designed for avoiding and handling NAS signalling congestion for UEs with a back-off timer associated with or without an S-NSSAI.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications Which access control mechanisms are supported by NG-RAN? option 1: RACH back off option 2: RRC Connection Reject option 3: RRC Connection Release option 4: UE based access barring mechanisms option 5: All of the above ### Response: option 5: All of the above explanation :NG-RAN supports access control mechanisms such as RACH back off, RRC Connection Reject, RRC Connection Release, and UE based access barring mechanisms.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the purpose of the N26 interface in the non-roaming architecture for interworking between 5GS and EPC? option 1: To enable interworking between EPC and the NG core option 2: To support subset of the functionalities that are supported over S10 option 3: To provide inter-CN interface between the MME and 5GS AMF option 4: To support interworking between EPC and NG-RAN ### Response: option 1: To enable interworking between EPC and the NG core explanation :The N26 interface is an inter-CN interface between the MME and 5GS AMF, used to enable interworking between EPC and the NG core.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications Which interface is used between the BSC and BTS to support the services offered to the GSM users and subscribers? option 1: S1-MME-interface option 2: S1-U-interface option 3: Abis-interface option 4: Iub-interface option 5: Iur-interface ### Response: option 3: Abis-interface explanation :The Abis-interface is used between the BSC and BTS to support the services offered to the GSM users and subscribers.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the purpose of the 'Connect-streaming' communication paradigm in management service interactions? option 1: To authenticate the management service consumer option 2: To establish a connection for management data streaming option 3: To enable the management service producer to invoke operations option 4: To request a subscription to notifications and receive network events option 5: To provide response based on a request from the management service consumer ### Response: option 2: To establish a connection for management data streaming explanation :The 'Connect-streaming' communication paradigm is used for a management service producer to request to establish a connection with the management service consumer for management data streaming.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications Which interface is used to transfer OAM traffic between the RN and the OAM system? option 1: S1 interface option 2: X2 interface option 3: Un interface option 4: MME interface option 5: OAM interface ### Response: option 3: Un interface explanation :The OAM traffic between the RN and the OAM system is transported over the Un interface.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications Which state is the UE expected to receive the DL PRS for RTT-based propagation delay compensation in? option 1: RRC_IDLE state option 2: RRC_CONNECTED state option 3: RRC_INACTIVE state option 4: RRC_RELEASED state option 5: None of the above ### Response: option 2: RRC_CONNECTED state explanation :The UE is expected to receive the DL PRS for RTT-based propagation delay compensation only in RRC_CONNECTED state.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards overview What aspect does the CT Work Item "V8-CT" focus on? option 1: Emergency call in Local breakout roaming architecture option 2: Location determination at IMS entities in the HPLMN option 3: Local number translation in VPLMN for legacy CS and Local Breakout option 4: Fetching and providing necessary information for emergency call option 5: Charging principles for S8HR roaming architecture ### Response: option 4: Fetching and providing necessary information for emergency call explanation :The CT Work Item "V8-CT" focuses on adding the new procedure to fetch and provide necessary information to establish an emergency call.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications Where can the UE receive PLMN identity and CN type information in a given cell? option 1: Data channel option 2: Access channel option 3: Control channel option 4: Broadcast channel option 5: Paging channel ### Response: option 4: Broadcast channel explanation :The UE can receive PLMN identity and CN type information in a given cell through the broadcast channel.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the cyclic-prefix length for normal cyclic prefix in SC-FDMA? option 1: 160Ts option 2: 144Ts option 3: 512Ts option 4: 256Ts option 5: 768Ts ### Response: option 2: 144Ts explanation :The cyclic-prefix length for normal cyclic prefix in SC-FDMA is 144Ts for SC-FDMA symbols #1 to #6.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What physical channel is used for sidelink transmitted data itself? option 1: PSCCH option 2: PSBCH option 3: PSFCH option 4: PSSCH option 5: Synchronization signal ### Response: option 4: PSSCH explanation :The Physical Sidelink Shared Channel (PSSCH) is used to transmit the data itself over sidelink.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the reference point between the GGSN and a packet data network? option 1: Mm Reference Point option 2: GMLC - external LCS Client option 3: Le reference point option 4: Gi reference point option 5: Wi reference point ### Response: option 4: Gi reference point explanation :The reference point between the GGSN and a packet data network is called the Gi reference point.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What can a consumer of user data congestion analytics request? option 1: Identifiers of the applications that contribute the most to the traffic option 2: Preferred level of accuracy of the analytics option 3: Temporal granularity size option 4: All of the above ### Response: option 4: All of the above explanation :A consumer of user data congestion analytics can request the identifiers of the applications that contribute the most to the traffic, preferred level of accuracy of the analytics, and temporal granularity size.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What actions are taken when an AMF fails and is detected by the 5G-AN? option 1: AMF is deregistered from NRF option 2: AMF is marked as failed in the 5G-AN option 3: NGAP UE-TNLA-binding is released for CM-CONNECTED UE(s) option 4: Backup AMF is selected if available option 5: Notification is sent to peer CP NFs about the AMF failure ### Response: option 2: AMF is marked as failed in the 5G-AN explanation :When an AMF fails and is detected by the 5G-AN, the AMF is marked as failed in the 5G-AN and is not considered for selection for subsequent N2 transactions.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications How are the metrics related to the provided thresholds evaluated for WLAN BSS? option 1: The UE evaluates all metrics related to the provided thresholds. option 2: The UE excludes the WLAN BSS if not all metrics related to the provided thresholds can be acquired. option 3: The WLAN BSS is excluded if the UE cannot evaluate the provided thresholds. option 4: The UE considers the metrics with unprovided thresholds as zero. option 5: The UE considers the metrics with unprovided thresholds as infinite. ### Response: option 2: The UE excludes the WLAN BSS if not all metrics related to the provided thresholds can be acquired. explanation :If not all metrics related to the provided thresholds can be acquired for a WLAN BSS, the UE excludes that WLAN BSS from the evaluation of the rules.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications When does the NG-RAN initiate the Connection Inactive procedure with CN based MT communication handling? option 1: When the UE is in CM-CONNECTED with RRC_CONNECTED state and has received the "RRC Inactive Assistance Information" from the AMF option 2: When CN based mobile terminating (MT) communication handling is requested for a UE with eDRX cycle value longer than 10.24 seconds for RRC_INACTIVE state option 3: When the UE is registered in the network with negotiated eDRX parameters for CM-IDLE state and is in CM-CONNECTED with RRC_CONNECTED state option 4: When the AMF provides the eDRX cycle value for CM-IDLE state to NG-RAN ### Response: option 2: When CN based mobile terminating (MT) communication handling is requested for a UE with eDRX cycle value longer than 10.24 seconds for RRC_INACTIVE state explanation :The NG-RAN initiates the Connection Inactive procedure with CN based MT communication handling when it is requested for a UE with eDRX cycle value longer than 10.24 seconds for RRC_INACTIVE state.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the purpose of the power headroom reports (PHR)? option 1: To provide support for power-aware packet scheduling option 2: To allocate resources for the initial HARQ transmissions to UEs option 3: To enable coordination of TDM and FDM cell resources between MAC in the gNB and the corresponding entity in the ng-eNB option 4: To enable fast SCell activation when CA is configured option 5: To provide support for QoS-aware packet scheduling ### Response: option 1: To provide support for power-aware packet scheduling explanation :Power headroom reports are needed to provide support for power-aware packet scheduling.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards overview What are the high-level features specified for 5G Location Services? option 1: LCS Quality of services option 2: LMF selection, UE LCS privacy handling option 3: LCS Quality of services, LMF selection option 4: UE LCS privacy handling, LMF selection option 5: UE LCS privacy handling, LCS Quality of services ### Response: option 2: LMF selection, UE LCS privacy handling explanation :The high-level features specified for 5G Location Services include LMF selection and UE LCS privacy handling.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications Which network function is responsible for network exposure? option 1: AMF option 2: SMF option 3: NRF option 4: NEF option 5: UDM ### Response: option 4: NEF explanation :The Network Exposure Function (NEF) is responsible for network exposure.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the purpose of Formatting Instructions? option 1: To buffer and send several notifications in one message option 2: To specify the time window for sending notifications option 3: To summarize notifications and reduce the volume of data reported to the Data Consumer option 4: To determine the exact time for sending notifications option 5: To specify the parameter names and values to be reported to the Consumer ### Response: option 3: To summarize notifications and reduce the volume of data reported to the Data Consumer explanation :Formatting Instructions allow summarizing of notifications to reduce the volume of data reported to the Data Consumer.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards overview What is a capability added in the V2X Application Enabler (VAE) layer? option 1: V2X UE group management option 2: V2X service discovery option 3: Session-oriented services option 4: Network monitoring by the V2X UE option 5: Support for PC5 provisioning ### Response: option 2: V2X service discovery explanation :V2X service discovery across multiple V2X service providers is a capability added in the V2X Application Enabler (VAE) layer.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What defines the comb size of a DL PRS resource? option 1: dl-PRS-ResourceSymbolOffset option 2: dl-PRS-StartPRB option 3: numSymbols option 4: dl-PRS-ResourceSlotOffset option 5: nr-DL-PRS-CombSizeN-AndReOffset ### Response: option 5: nr-DL-PRS-CombSizeN-AndReOffset explanation :The comb size of a DL PRS resource is defined by nr-DL-PRS-CombSizeN-AndReOffset.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What does the NWDAF containing MTLF consider when using untrusted AF(s) as data sources? option 1: The rating of untrusted AF(s) option 2: The accuracy of ML models option 3: Both option 1 and option 2 option 4: None of the above ### Response: option 1: The rating of untrusted AF(s) explanation :The NWDAF containing MTLF considers the rating of untrusted AF(s) when using them as data sources.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What does a '0' value for a bit of the bitmap, provided by dormancyGroupOutsideActiveTime, indicate? option 1: A firstOutsideActiveTimeBWP-Id for the UE. option 2: A dormant DL BWP for the UE. option 3: A current active DL BWP for the UE. option 4: An active DL BWP for the UE. ### Response: option 4: An active DL BWP for the UE. explanation :A '0' value for a bit of the bitmap indicates an active DL BWP for the UE.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What does the 5G system need to support for the tactile and multi-modal communication service? option 1: Ability to provide customized QoS handling for each communication mode option 2: Support for synchronization between different media components option 3: Ability to handle haptic data for touch-based communication option 4: Provision of real-time sensor data for environment awareness option 5: Capability to handle immersive VR applications with low latency ### Response: option 2: Support for synchronization between different media components explanation :For immersive multi-modal VR applications, synchronization between different media components is critical, and the 5G system needs to support this synchronization to avoid a negative impact on the user experience.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What happens when a registration attempt is rejected with a cause of 'permanent' PLMN restriction? option 1: The PLMN is added to the forbidden PLMNs list option 2: The UE enters the limited service state option 3: The UE stores the location area or tracking area in a forbidden list option 4: The UE searches for a suitable cell in the same PLMN option 5: The UE performs an investigation scan for a higher priority PLMN ### Response: option 1: The PLMN is added to the forbidden PLMNs list explanation :When a registration attempt is rejected with a cause of 'permanent' PLMN restriction, the PLMN is added to the forbidden PLMNs list.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the interaction between the 5GC NF(s) and the EASDF? option 1: They do not interact within a PLMN option 2: They interact using DNS messages option 3: They interact to exchange DNS message handling rules option 4: They interact for EASDF discovery and selection option 5: None of the above ### Response: option 4: They interact for EASDF discovery and selection explanation :The interaction between 5GC NF(s) and the EASDF involves EASDF discovery and selection.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the relative increase in cable loss per meter from 43.5 GHz to 71 GHz? option 1: 0.33 dB option 2: 0.9 dB option 3: 3.5 dB option 4: 7.7 dB ### Response: option 1: 0.33 dB explanation :The relative increase in cable loss per meter from 43.5 GHz to 71 GHz is 0.33 dB.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the polarization slant angle for a purely vertically polarized antenna element? option 1: 90 degrees option 2: 180 degrees option 3: 45 degrees option 4: 0 degrees option 5: 60 degrees ### Response: option 1: 90 degrees explanation :The document states that for a purely vertically polarized antenna element, the polarization slant angle is 90 degrees.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What determines the mapping between service data of different domains? option 1: The visited network option 2: The home environment option 3: The roaming agreement option 4: The capabilities of the visited network option 5: The roaming subscriber ### Response: option 2: The home environment explanation :The document states that the mapping between service data of different domains is determined by the home environment.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What aspect of the URSP rule does the Application Traffic Descriptor from the AF guidance affect? option 1: Route Selection Descriptor Precedence option 2: URSP Traffic Descriptor option 3: DNN selection component option 4: Location Criteria ### Response: option 2: URSP Traffic Descriptor explanation :The Application Traffic Descriptor from the AF guidance is used to set the URSP Traffic Descriptor in the URSP rule.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications Which specification defines the Nchf_SpendingLimitControl service? option 1: TS 23.203 option 2: TS 32.27x option 3: TS 23.502 option 4: TS 23.272 ### Response: option 3: TS 23.502 explanation :The Nchf_SpendingLimitControl service is specified in TS 23.502.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards overview What is Network Slice-Specific Authentication and Authorization (NSSAA)? option 1: The authentication and authorization process for the SUPI in the 5G system option 2: The authentication and authorization process for the network slice in the 5G system option 3: The authentication and authorization process for the AMF in the 5G system option 4: The authentication and authorization process for the V-SMF in the 5G system option 5: The authentication and authorization process for the AAA-S in the 5G system ### Response: option 2: The authentication and authorization process for the network slice in the 5G system explanation :Network Slice-Specific Authentication and Authorization (NSSAA) is the authentication and authorization process specifically for the network slice in the 5G system.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the motion-to-photon latency range required to support VR environments with low motion-to-photon capabilities? option 1: 1 ms to 5 ms option 2: 5 ms to 10 ms option 3: 7 ms to 15 ms option 4: 15 ms to 20 ms ### Response: option 3: 7 ms to 15 ms explanation :To support VR environments with low motion-to-photon capabilities, the required motion-to-photon latency range is 7 ms to 15 ms.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications Which event notification is used to monitor the movement of candidate UEs in/out of the monitoring area? option 1: Namf_EventExposure_Subscribe service option 2: Npcf_PolicyAuthorization_Create request option 3: Nnef_AFsessionWithQoS_Revoke option 4: Namf_EventExposure_Notify service option 5: PDU session modification ### Response: option 4: Namf_EventExposure_Notify service explanation :The Namf_EventExposure_Notify service is used to notify the eNEF about the movement of candidate UEs in/out of the monitoring area.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the purpose of the HR-SBO PDU Session in roaming? option 1: To establish a secure connection between the UE and the V-SMF option 2: To enable local traffic routing in the visited PLMN option 3: To provide access to the data network in the home PLMN option 4: To support session breakout in V-PLMN based on the subscription ### Response: option 2: To enable local traffic routing in the visited PLMN explanation :The HR-SBO PDU Session allows for local traffic routing in the visited PLMN based on the subscription.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the purpose of the UE Capability Retrieval framework? option 1: To report the UE's radio access capabilities to the network option 2: To request specific capabilities from the network option 3: To optimize the UE's power consumption option 4: To enable sidelink communication option 5: All of the above ### Response: option 1: To report the UE's radio access capabilities to the network explanation :The purpose of the UE Capability Retrieval framework is to report the UE's radio access capabilities to the network.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What functionality does LLDP provide in the TSN Transport Network? option 1: Dynamic address assignment option 2: Stream management option 3: Topology information exchange option 4: Priority queueing ### Response: option 3: Topology information exchange explanation :LLDP functionality in the Transport Network enables topology information exchange between the TSN nodes.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the function of the Radio Bearer Service? option 1: To provide transport between RAN and CN option 2: To handle the radio interface transport option 3: To provide QoS in the backbone network option 4: To connect the UMTS CN Edge Node with the external network ### Response: option 2: To handle the radio interface transport explanation :The Radio Bearer Service covers all aspects of the radio interface transport.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What does the UE ignore regarding cell access restrictions for cell reselection when camping on E-UTRA connected to 5GC? option 1: Access Class or ACDC category restrictions option 2: Access Category and Identity restrictions option 3: Emergency call restrictions option 4: Cell status restrictions option 5: Access restrictions for NAS initiated access attempts ### Response: option 2: Access Category and Identity restrictions explanation :The UE ignores Access Category and Identity related cell access restrictions for cell reselection.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the MDA capability for paging optimization analysis used for? option 1: Optimizing network resource usage option 2: Predicting potential network failures option 3: Analyzing service experience of end users option 4: Analyzing handover performance option 5: Avoiding wastage of network resources ### Response: option 5: Avoiding wastage of network resources explanation :The MDA capability for paging optimization analysis is used to optimize the current paging procedures in 5G networks and avoid wastage of network resources.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications Which two new QoS Class Identifiers (QCIs) are added in 5G for Ultra Low Latency GBR services? option 1: QCI 80 and QCI 81 option 2: QCI 84 and QCI 85 option 3: QCI 82 and QCI 83 option 4: QCI 86 and QCI 87 ### Response: option 2: QCI 84 and QCI 85 explanation :In 5G, QCI 84 and QCI 85 are added as new QoS Class Identifiers (QCIs) for Ultra Low Latency GBR services.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What reference point enables interactions between the EES and the EEC? option 1: EDGE-1 option 2: EDGE-2 option 3: EDGE-3 option 4: EDGE-4 ### Response: option 1: EDGE-1 explanation :EDGE-1 reference point enables interactions between the EES and the EEC.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the definition of OTA sensitivity? option 1: The receiver's ability to receive an unwanted signal in the presence of a wanted signal. option 2: The minimum mean power received at the RIB for a specified reference measurement channel. option 3: The receiver's ability to receive an OTA wanted signal at its assigned channel frequency. option 4: The measure of the capability of the receiver unit to receive a wanted signal in the presence of an interfering signal. option 5: The ability of the receiver to receive a wanted signal in the presence of an interfering signal. ### Response: option 5: The ability of the receiver to receive a wanted signal in the presence of an interfering signal. explanation :OTA sensitivity refers to the ability of the receiver to receive a wanted signal in the presence of an interfering signal.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications When does the UE apply the MCCH information acquisition procedure? option 1: Upon receiving SIB20 of an SCell option 2: Upon receiving a change notification about MCCH information option 3: Upon entering the cell providing SIB1 option 4: All of the above ### Response: option 4: All of the above explanation :The UE applies the MCCH information acquisition procedure upon receiving SIB20 of an SCell, upon receiving a change notification about MCCH information, and upon entering the cell providing SIB1.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards overview Which 3GPP release introduced NR-V2X with a focus on V2X (Vehicle-to-Everything) communication? option 1: Rel-8 option 2: Rel-12 option 3: Rel-14 option 4: Rel-16 ### Response: option 4: Rel-16 explanation :NR-V2X was introduced in Rel-16 with a focus on V2X communication.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is a multi-modal communication service? option 1: Service that supports communication between different MNOs option 2: Service that enables communication between different devices and networks option 3: Service that allows input and output from multiple sources and destinations option 4: Service that provides communication through multiple communication modes option 5: Service that supports communication with multiple users simultaneously ### Response: option 3: Service that allows input and output from multiple sources and destinations explanation :A multi-modal communication service is a service that supports applications enabling input from more than one sources and/or output to more than one destinations to convey information more effectively.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is one of the challenges of energy saving schemes in the radio access network (RAN)? option 1: Inaccurate cell load prediction option 2: Lack of energy-saving related parameters option 3: Difficulty in identifying energy-saving actions option 4: Lack of feedback on energy efficiency option 5: Conflicting targets between system performance and energy efficiency ### Response: option 1: Inaccurate cell load prediction explanation :Energy-saving decisions currently rely on current traffic load without considering future traffic load.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the range of frequencies for which the O2I car penetration loss models are applicable? option 1: 0.1-10 GHz option 2: 0.6-60 GHz option 3: 100-1000 GHz option 4: 10-100 GHz ### Response: option 2: 0.6-60 GHz explanation :The O2I car penetration loss models are applicable for at least 0.6-60 GHz.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications In which bearer option is the S1-U connection terminated in the MeNB? option 1: Split bearer option 2: SCG bearer option 3: MCG bearer option 4: Primary bearer ### Response: option 3: MCG bearer explanation :In the MCG bearer option, the S1-U connection for the corresponding bearer(s) is terminated in the MeNB.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications When does the UE monitor DCP on the active BWP? option 1: During active-time and BWP switching option 2: During measurement gaps and CFRA preamble transmission option 3: During PUSCH transmission and MIMO layers option 4: At a configured offset before the on-duration ### Response: option 4: At a configured offset before the on-duration explanation :The UE monitors DCP on the active BWP at a configured offset before the on-duration.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards overview What is the purpose of introducing shorter scheduling periods in downlink and sidelink for V2X messages? option 1: To reduce latency for V2X services option 2: To increase power saving in pedestrian UEs option 3: To reduce resource collision probability option 4: To adjust transmission parameters based on congestion control option 5: To enable synchronization outside eNB coverage ### Response: option 1: To reduce latency for V2X services explanation :Shorter scheduling periods in downlink and sidelink are introduced to provide sufficiently low latency for V2X services.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications Which USIM registration triggers the allocation of a new 5G-GUTI for the Paging Timing Collision Control feature? option 1: Emergency registration option 2: Normal registration option 3: Connection release option 4: Paging restriction option 5: None of the above ### Response: option 2: Normal registration explanation :For the Paging Timing Collision Control feature, a Multi-USIM UE triggers the allocation of a new 5G-GUTI through a normal registration, not emergency registration.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the purpose of the MnS discovery service? option 1: To enable MnS instances to be discovered by MnS consumers option 2: To provide access control capabilities in a multiple tenant environment option 3: To authenticate and authorize MnS consumers and producers option 4: To provision management capabilities for MnS consumers ### Response: option 1: To enable MnS instances to be discovered by MnS consumers explanation :The MnS discovery service enables MnS consumers to discover the management capabilities of MnS producers.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the purpose of the WI 'OAM14-FILMEAS'? option 1: Management of measurements for cross-operator accounting option 2: Management concepts, architecture, and requirements option 3: Enabling the operator to provide maximum time between SIP request and response option 4: Functions and solutions related to Lifecycle Management option 5: Use cases and requirements for management of fault and performance measurements ### Response: option 1: Management of measurements for cross-operator accounting explanation :The purpose of the WI 'OAM14-FILMEAS' is to enable cross-operator accounting between a Master Operator and Participating Operator(s) based on consumed data volume, using statistical measurements when a RAN is shared.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the purpose of dynamic resource schedulers in MAC in gNB? option 1: To allocate physical layer resources for downlink and uplink option 2: To configure the parameters of gNB and UE option 3: To measure radio conditions at the gNB option 4: To provide support for QoS-aware packet scheduling ### Response: option 1: To allocate physical layer resources for downlink and uplink explanation :Dynamic resource schedulers in MAC in gNB allocate physical layer resources for downlink and uplink based on UE buffer status and QoS requirements.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications How does the UE determine the PDU Session Pair ID and/or RSN for redundant PDU Sessions in URLLC? option 1: The UE determines them based on URSP rules and matched traffic descriptors. option 2: The UE receives them from the SMF during PDU Session establishment. option 3: The UE generates them independently based on its implementation. option 4: The UE obtains them from the PCF via local configuration. option 5: The UE uses the implementation of FRER in its operating system. ### Response: option 1: The UE determines them based on URSP rules and matched traffic descriptors. explanation :When URSP is used to establish two redundant PDU Sessions, the UE differentiates duplicated traffic by using distinct traffic descriptors in distinct URSP rules.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What is the purpose of 3GPP PS Data Off feature? option 1: To prevent transport via PDN connections of all data packets option 2: To configure operator services option 3: To provide consistent charging between HPLMN and VPLMN option 4: To support falling back to operate over the CS domain ### Response: option 1: To prevent transport via PDN connections of all data packets explanation :3GPP PS Data Off feature prevents transport of all data packets, except IP packets required by 3GPP PS Data Off Exempt Services, via PDN connections in 3GPP access networks.
### Instruction: Choose the most appropriate option for the given question. Also provide an explanation. Category :Standards specifications What does VarMeasReportList include? option 1: Information about the measurements that have been completed by the UE option 2: Information about the measurements that are currently being performed by the UE option 3: Information about the measurements that are scheduled to be performed by the UE option 4: Information about the measurements for which the triggering conditions have been met option 5: Information about the measurements that have been requested by the network ### Response: option 4: Information about the measurements for which the triggering conditions have been met explanation :VarMeasReportList includes information about the measurements for which the triggering conditions have been met.