context
stringlengths 47
998
| question
stringlengths 28
175
| answer
stringlengths 31
1.1k
| __index_level_0__
int64 0
1.47k
|
---|---|---|---|
Daytime Running Light (D.R.L.) (if
equipped)
For DRL replacement, we recommend you
to take your vehicle to the Maruti Suzuki
authorized workshop as special procedure
for the same is required.
Rear Combination Light
For Rear Combination Light replacement,
we recommend you to take your vehicle to
the Maruti Suzuki authorized workshop as
special procedure for the same is required.
License Plate Light
Since special procedures are required, it is
recommended that you take your vehicle
to a Maruti Suzuki authorized workshop for
light replacement.
High Mount Stop Light
Since special procedures are required, it is
recommended that you take your vehicle
to a Maruti Suzuki authorized workshop for
light replacement.
Interior Light
Front (if equipped)
(1)
INSPECTION AND MAINTENANCE
2) Pull the bulb out and then insert a new
one.
3) After replacing the bulb, install the front
interior light lens in the reverse order of
removal.
(2)
Center
(1)
(2) | What is the recommended procedure for replacing the Daytime Running Light (D.R.L.)? | The recommended procedure for replacing the Daytime Running Light (D.R.L.) is to take your vehicle to the Maruti Suzuki authorized workshop as a special procedure is required. | 757 |
Engine Switch (Vehicle with
Keyless Push Start System)
(if equipped)
74TB05021
LOCK (OFF)
This mode is for parking the vehicle. When
this mode is selected by pressing the
engine switch and then any door (including
the tailgate) is opened or closed, the steer-
ing will be locked automatically.
ACC
Press the engine switch to select this igni-
tion mode to use such electric equipment
as the audio system, outside rearview mir-
rors and accessory socket with the engine
off. When this position is selected, the
5-5
information display in the instrument clus-
ter shows the following message.
selected this ignition mode by pressing
the engine switch.
74TB05003
ON
• With the engine off
You can use such electric equipment as
the power windows and wipers with the
engine off. When this ignition mode is
selected by pressing the engine switch,
the information display in the instrument
cluster shows the following message. | What is the purpose of the ACC ignition mode in the car's engine switch? | The purpose of the ACC ignition mode in the car's engine switch is to allow the use of electric equipment such as the audio system, outside rearview mirrors, and accessory socket with the engine off. | 352 |
(5)
(6)
Pb
(5) Crossed-out wheeled bin symbol
(6) Chemical symbol of “Pb”
51KM042
The crossed-out wheeled bin symbol (5)
located on the battery label indicates that
the used battery should be collected sepa-
rately from ordinary household trash. The
chemical symbol of “Pb” (6) indicates the
battery contains more than 0.004% lead.
By ensuring the used battery is disposed
of or recycled correctly, you will help pre-
vent potential negative consequences for
the environment and human health, which
could otherwise be caused by inappropri-
ate trash handling of the battery. The recy-
cling of materials will help to conserve
natural resources. For more detailed infor-
mation about disposing of or recycling the
used battery, consult a Maruti Suzuki
authorized workshop.
INSPECTION AND MAINTENANCE
Fuses
Your vehicle has three types of fuses, as
described below: | What does the crossed-out wheeled bin symbol (5) on the battery label indicate? | The crossed-out wheeled bin symbol (5) on the battery label indicates that the used battery should be collected separately from ordinary household trash. | 744 |
2-32
55TH0-74E
FOR SAFE DRIVING
Securing Child Restraint System by
ISOFIX
Securing
Install the ISOFIX type child restraint sys-
tem according to the instructions provided
by the child restraint system manufacturer.
After installation, try moving the child
restraint system in all directions especially
forward to check that connecting bars are
securely latched to the anchorages.
(1)
(1)
(2)
55T020350
(1) Lower anchorage
Your vehicle is equipped with the lower
anchorages in the rear seat outboard seat-
ing positions for securing a ISOFIX type of
child restraints with the connecting bars.
The lower anchorages are located where
the rear of the seat cushion meets the bot-
tom of the seatback.
WARNING
the
ISOFIX
Install
type of child
restraint(s) in the only outboard seat-
ing positions, not in the central posi-
tion for the rear seat.
2-33
(2) Top tether anchorage
55T020360 | Where should the ISOFIX type child restraint system be installed in the vehicle? | The ISOFIX type child restraint system should be installed in the rear seat outboard seating positions. | 124 |
Unlocking from inside the vehicle
If you cannot unlock the tailgate by using
the key in the driver’s door lock due to a
discharged lead-acid battery or malfunc-
tion, ask Maruti Suzuki authorized work-
shop. In emergency situations, follow the
procedures below.
the
1) Remove
luggage compartment
cover (if equipped) and fold the rear
seat forward for easier access. Refer to
“Folding rear seats” in “FOR SAFE
DRIVING” section for details on how to
fold the rear seat forward.
(5)
2) Remove the cover (5) using a flat-
bladed screwdriver.
55T030450
3-5
(6)
(7)
Keyless Entry System
Transmitter / Keyless Push
Start System Remote
Controller
(2)
(2)
(1)
(1)
55T030460
3) Open the cover (6), and then, move the
emergency lever (7) to the direction of
the arrow with a flat-blade screwdriver
as shown in the illustration. | What should you do if you are unable to unlock the tailgate using the key in the driver's door lock? | If you are unable to unlock the tailgate using the key in the driver's door lock due to a discharged battery or malfunction, you should ask a Maruti Suzuki authorized workshop for assistance. In emergency situations, you can follow the procedures mentioned in the manual. | 178 |
sumption
(7)
56RM02018
fuel con-
4-20
55TH0-74E
INSTRUMENT CLUSTER
You can check transition of average fuel
consumption every 5 minutes from 15 min-
utes before up to now. Also, you can check
transition of average fuel consumption the
past 3 driving cycles. Time indication and
driving cycle indication can be changed.
For details, refer to “Setting mode” in this
section.
Driving range
(8)
52RM21090
(8) Driving range
If you selected driving range the last time
you drove the vehicle, the display indicates
“---” for a few seconds and then indicates
the current driving range when the ignition
switch is turned to “ON” position or the
engine switch is pressed to change the
ignition mode to ON.
The driving range shown in the display is
an indicative unit of the approximate dis-
4-21 | How can you check the transition of average fuel consumption in the car? | You can check the transition of average fuel consumption every 5 minutes from 15 minutes before up to now. You can also check the transition of average fuel consumption for the past 3 driving cycles. | 287 |
ANAND MOTORS AGENCIES LTD (1301-13-01),
11TH KMS, FAIZABAD ROAD, CHINHAT,
LUCKNOW - 227105
PH :7080000462.
KTL AUTOMOBILE PVT. LTD. (1311-13-01),
MATIYARI CHAURAHA, CHINNHAT, FAIZABAD
ROAD, LUCKNOW - 227105
PH :7408411453.
ANAND MOTORS AGENCIES LTD (1301-13-02),
47, NEHRU ROAD, SADAR BAZAR, LUCKNOW -
226016
PH :3098257, 7080000463.
BRIGHT 4 WHEEL SALES PVT. LTD.
(1305-13-01), 11/CP- 6, VIKAS NAGAR, RING
ROAD, LUCKNOW - 226022
PH :2739501.
ONE UP MOTORS INDIA PVT. LTD. (1306-13-01),
C-16A,TRANSPORT NAGAR,KANPUR ROAD,
LUCKNOW, KANPUR ROAD, LUCKNOW - 226012
PH :9918100801.
KTL AUTOMOBILE PVT. LTD. (1311-13-02),
INDRA NAGAR, OPP. HALFAIZABAD ROAD,
LUCKNOW, UTTAR PRADESH - 226016
PH :7408411478.
KTL AUTOMOBILE PVT. LTD. (1311-13-03),
BEHIND N S KOHLI PETROL PUMP, SARDARI
KHEDA, KANPUR ROAD, ALAMBAGH, LUCKNOW
- 226005
PH :9918451222.
ANAND MOTORS AGENCIES LTD (1301-13-04),
G-3, LDA MARKET, ALIGANJ, LUCKNOW -
226024
PH :4103406/407/408, 7080000464. | What is the contact number for KTL Automobile Pvt. Ltd. in Lucknow? | The contact number for KTL Automobile Pvt. Ltd. in Lucknow is 7408411453. | 1,417 |
KURUDWADI
1425.
CHAVAN MOTORS DIVISION INDIA PVT LTD
(CUF1-CUF-01), GAT NO.:256, BYPASS ROAD,
A/P KURDA, TALUKA-MADHA, DISTT. SOLAPUR.
- 413208
PH :8806665691.
KURUNDWAD
1426.
SAI SERVICE PVT. LTD. (BHO1-BHO-01), GAT
NO. 250, AT POST - KURUNDWAD, TALUKA -
SHUROO, DIST.-KOLHAPUR. - 416106
PH :9673339695.
LANJA
1427.
JAGRUT MOTORS (SER1-SER-01), GAT NO-663,
TALUKA-LANJA, DIST - RATNAGIRI,
MAHARASHTRA -416701 - 416701
PH :8108718346.
LASALGAON
1428.
SHAAN CARS PRIVATE LIMITED (BZM1-BZM-01),
PLOT NO. 337, LASALGAON MAIN ROAD,
LASALGAON, TALUKA – NANDGAON, DISTRICT
– NASHIK. - 422306
PH :9075028780, 7720094874.
LATUR
1429.
1430. | Where is the Sai Service Pvt. Ltd. located? | The Sai Service Pvt. Ltd. is located in Kurundwad, Taluka - Shuroo, District - Kolhapur. | 1,217 |
Information display
Description
When the vehicle is running, ISG (Integrated Starter Gen-
erator) assists engine power as an electric motor.
INSTRUMENT CLUSTER
Information shown after driving
When you turn the ignition switch to “LOCK”
position or press the engine switch to
change the ignition mode to “LOCK” (OFF),
the following information appears for sev-
eral seconds on the information display.
When the vehicle is powered by the engine.
When decelerating your vehicle, the ISG generates elec-
tricity without engine power.
When the engine automatically stops by the ENG A-STOP
system.
74TB0409
74TB04010
74TB04011
74TB04012
(if equipped)
(if equipped)
(if equipped)
53SB2036
4-24
55TH0-74E
INSTRUMENT CLUSTER
(When using
Intersection Guidance
Android AutoTM*1 or Apple CarPlay*2 on
infotainment system
• You can display or hide the intersection
guidance by changing the setting (cus-
tomization). For details, refer to “Setting
Mode” in this section. | What information is displayed on the instrument cluster after driving the vehicle? | When the ignition switch is turned to the "LOCK" position or the engine switch is pressed to change the ignition mode to "LOCK" (OFF), the information displayed on the instrument cluster for several seconds includes details about the vehicle's power source (engine or electric motor) and the operation of the ISG (Integrated Starter Generator) system. It may also show information related to the ENG A-STOP system if equipped. | 294 |
NOTE:
• Following operations of the steering
wheel while parking or driving at a very
low speed may have steering effort big-
ger gradually. This is not a malfunction of
the steering system, but the power steer-
ing control system limits the power assist
in order to prevent them from overheat-
ing.
– The steering wheel is operated very
often.
– The steering wheel is kept in a fully
turned position for a long while.
55TH0-74E
When the power steering control system
cool down, the power steering system
back to the original condition.
However, repeating
these operations
could cause the power steering system
damaged.
• If the power steering system does not
work properly, you will feel heavier to
steer but you still will be able to steer.
• If the steering is operated, you may hear
a noise. This is normal and indicates that
the power steering system works prop-
erly.
Engine Oil Pressure Warning Light
Charge Warning Light | What are some actions that may cause the steering effort to gradually increase? | Some actions that may cause the steering effort to gradually increase are operating the steering wheel very often and keeping the steering wheel in a fully turned position for a long while. | 327 |
• As
the
engine
compartment
becomes hot, it may cause burns.
When opening the hood, do not
allow a child to come close to the
hood.
• If you leave any tool or cloth in the
engine compartment, it may cause
a malfunction. Also, as the engine
compartment becomes hot, it may
result in vehicle fire. Do not leave
any tool or cloth for inspection or
cleaning in the engine compart-
ment.
CAUTION
If you come close to a running drive
belt or a cooling fan (radiator fan),
hands, hair, clothing, etc. may be
caught and you may get injured.
When the engine is running, keep
away from the drive belt or the cool-
ing fan (radiator fan).
(1)
55TB07005
1) Pull up the hood release lever (1)
located under the driver’s side instru-
ment panel in the outboard position
(Left of the fuel lever). This will disen-
gage the hood lock halfway.
(2)
55TB07006
OTHER CONTROLS AND EQUIPMENT | What precautions should be taken when opening the hood of a car? | When opening the hood of a car, it is important to take precautions to ensure safety. One precaution is to not allow a child to come close to the hood, as the engine compartment can become hot and cause burns. Additionally, it is important to not leave any tools or cloths in the engine compartment, as this can cause malfunctions and potentially result in a vehicle fire. It is also advised to keep away from the running drive belt or cooling fan (radiator fan) to avoid getting injured. | 630 |
(cid:132)(cid:3)(cid:48)(cid:36)(cid:53)(cid:56)(cid:55)(cid:44)(cid:3)(cid:54)(cid:56)(cid:61)(cid:56)(cid:46)(cid:44)(cid:3)(cid:36)(cid:56)(cid:55)(cid:43)(cid:50)(cid:53)(cid:44)(cid:54)(cid:40)(cid:39)(cid:3)(cid:39)(cid:40)(cid:36)(cid:47)(cid:40)(cid:53)(cid:3)(cid:58)(cid:50)(cid:53)(cid:46)(cid:54)(cid:43)(cid:50)(cid:51)
(cid:132)(cid:3)(cid:48)(cid:36)(cid:53)(cid:56)(cid:55)(cid:44)(cid:3)(cid:54)(cid:56)(cid:61)(cid:56)(cid:46)(cid:44)(cid:3)(cid:49)(cid:40)(cid:59)(cid:36)(cid:3)(cid:39)(cid:40)(cid:36)(cid:47)(cid:40)(cid:53)(cid:3)(cid:58)(cid:50)(cid:53)(cid:46)(cid:54)(cid:43)(cid:50)(cid:51)
(cid:132)(cid:3)(cid:48)(cid:36)(cid:53)(cid:56)(cid:55)(cid:44)(cid:3)(cid:54)(cid:40)(cid:53)(cid:57)(cid:44)(cid:38)(cid:40)(cid:3)(cid:48)(cid:36)(cid:54)(cid:55)(cid:40)(cid:53)(cid:3)(cid:11)(cid:48)(cid:54)(cid:48)(cid:12) | What is the purpose of this car manual guide? | The purpose of this car manual guide is to provide instructions and information on how to operate and maintain the car properly. It includes details on various features, controls, maintenance schedules, troubleshooting tips, and safety precautions. | 834 |
2-17
55TH0-74E
Do not Let a Child Play with Seat
Belt
An Adult Needs to Open or Close
Each Door or Window, and Adjust
Seats
Only an adult should open or close each
door or window and adjust seats, not to get
a child’s hands, arms, legs or neck, etc.
caught in.
69RHS161
WARNING
FOR SAFE DRIVING
WARNING
(Continued)
• If you leave the power window in
ready condition, it may cause unin-
tended operation of the power win-
dow by a child, resulting in an
accident.
When you leave the vehicle, make
sure to press the engine switch to
change the ignition mode to OFF or
turn the ignition switch to “OFF”
position, keep the key with you and
leave the vehicle with your child.
Do not Let a Child Stick His/her
Head or Hands out of the Window
if
the child's body | What precautions should be taken when opening or closing doors and windows and adjusting seats in a car? | An adult should be the one to open or close each door or window and adjust seats in order to prevent a child's hands, arms, legs, or neck from getting caught. | 88 |
SECUNDERABAD
FIROZABAD
232.
233.
234.
MITHRA AGENCIES (10NK-10-01), USHA MAYURI
THEATER, OPP TO SPENCERS MARKET,
MUSHEERABAD, SECUNDERABAD,
ANDRAPRADESH-500020. - 500020
PH :98850 01155.
AUTO FIN (K6NB-K6-01), PLOT NO.6, SURVEY
NO.267/1 & 267/2, BOWENPALLY, BALANAGAR
MAIN ROAD, SECUNDERABAD, TELANGANA -
500011
PH :8886144551.
VARUN MOTORS (K6NC-K6-01), VARUN
MOTORS,2ND CROSS
ROAD,SAINIKPURI,SECUNDERABAD - 500094
PH :779960094.
WARANGAL
235.
ADARSHA AUTOMOTIVE (D5NA-D5-01), H.NO:
23-6-132, HUNTER ROAD, OPP TO CITIZENS
CLUB, WARANGAL, TELANGANA - 506007
PH :8978944414.
UTTAR PRADESH
AGRA
236.
237.
238.
MADHUSUDAN MOTORS (66NA-66-01),
ADJOINING HEMA PETROL PUMP, EIT MANDI,
BODLA, AGRA - 282007
PH :6386901181,
6386901188.
PREM MOTORS (66NB-66-01), KHASRA NO.-655,
VILL ARTONI, DELHI-AGRA HIGHWAY, AGRA -
282007
PH :9690010839.
KTL PVT LTD (66NC-66-01), KHASRA NO - 246/1,
249/1, 251 , KUBERPUR, AGRA. - 282006
PH :8449710014.
ALIGARH
239.
240. | Where is the location of Mithra Agencies in Secunderabad? | Mithra Agencies is located in Musheerabad, Secunderabad, Andhra Pradesh. | 938 |
(cid:39)(cid:40)(cid:47)(cid:43)(cid:44)
(cid:53)(cid:36)(cid:45)(cid:36)(cid:54)(cid:55)(cid:43)(cid:36)(cid:49)
(cid:48)(cid:36)(cid:39)(cid:43)(cid:60)(cid:36)(cid:3)(cid:51)(cid:53)(cid:36)(cid:39)(cid:40)(cid:54)(cid:43)
(cid:21)
(cid:54)(cid:40)(cid:53)(cid:57)(cid:44)(cid:38)(cid:40)(cid:3)(cid:49)(cid:40)(cid:55)(cid:58)(cid:50)(cid:53)(cid:46)(cid:3)(cid:11)(cid:36)(cid:54)(cid:3)(cid:50)(cid:49)(cid:3)(cid:22)(cid:20)(cid:17)(cid:19)(cid:24)(cid:17)(cid:21)(cid:19)(cid:21)(cid:22)(cid:12)
(cid:36)(cid:85)(cid:72)(cid:68)(cid:3)(cid:50)(cid:73)(cid:73)(cid:76)(cid:70)(cid:72)(cid:3)(cid:47)(cid:82)(cid:70)(cid:68)(cid:87)(cid:76)(cid:82)(cid:81)
(cid:36)(cid:85)(cid:72)(cid:68)(cid:3)(cid:50)(cid:73)(cid:73)(cid:76)(cid:70)(cid:72)(cid:3)(cid:36)(cid:71)(cid:71)(cid:85)(cid:72)(cid:86)(cid:86) | What does the sequence of numbers and symbols in the context represent? | The sequence of numbers and symbols in the context represents a series of codes or instructions. | 892 |
obstacle.
• Warnings when obstacles are detected by rear sensors
OPERATING YOUR VEHICLE
Distance (approx.)
Center
sensors
60–150 cm
(24–59 in)
45–60 cm
(18–24 in)
35–45 cm
(14–18 in)
Less than 35 cm
(14 in)
Buzzer
Symbol
Short beeps at long intervals
Short beeps at short intervals
Three lines
Short beeps at very short intervals
Two lines
Continuous beep
One line
55T050100
NOTE:
• Symbols are displayed with a short delay after the detection of obstacles.
• If the system detects multiple obstacles simultaneously, the display shows all of their
positions using the corresponding symbols. However, the buzzers will sound only for
the nearest obstacles.
(2)
(2)
(1)
(1)
(2)
(2)
Instrument cluster (Type B)
(2)
(2)
(1)
(1)
(2)
(2)
55T050870
5-102
55TH0-74E
OPERATING YOUR VEHICLE | What are the different symbols and sounds that indicate the detection of obstacles by the rear sensors? | The different symbols and sounds that indicate the detection of obstacles by the rear sensors are as follows:
- Short beeps at long intervals: Symbolized by two lines, this indicates that the distance between the vehicle and the obstacle is approximately 60-150 cm (24-59 in).
- Short beeps at short intervals: Symbolized by three lines, this indicates that the distance between the vehicle and the obstacle is approximately 45-60 cm (18-24 in).
- Short beeps at very short intervals: Symbolized by one line, this indicates that the distance between the vehicle and the obstacle is approximately 35-45 cm (14-18 in).
- Continuous beep: Symbolized by two lines, this indicates that the distance between the vehicle and the obstacle is less than 35 cm (14 in).
It is important to note that if the system detects multiple obstacles simultaneously, the display will show all of their positions using the corresponding symbols. However, the buzzers will only sound for the nearest obstacles. | 554 |
(3)
(3)
(1) Hook
(2) Mirror cover
(3) Card holder
72M2058
You can put a card in the card holder (3) on
the back of the sun visor.
NOTICE
If you park your vehicle outdoors in
direct sunlight in hot weather, the
inside of the vehicle will become hot.
The heat may distort or crack a card.
When you park your vehicle outdoors
in direct sunlight or in hot weather,
do not leave plastic cards in the card
holder.
7-6
55TH0-74E
OTHER CONTROLS AND EQUIPMENT
Vanity Mirror (if equipped)
Interior Light
NOTICE
If you turn on the interior light for a
long time with the engine stopped,
the lead-acid battery may discharge.
Do not turn on the interior light for a
long time with the engine stopped.
Front (if equipped)
• The hazard warning lights, the position
lights and the headlights are off.
• After 15 minutes of the light on.
Center
(c)
(c)
(b)
(b)
(a)
(a)
(4)(4)
(4) Vanity mirror
70K178 | What caution should be taken when parking the vehicle outdoors in hot weather? | When parking the vehicle outdoors in hot weather, it is important not to leave plastic cards in the card holder, as the heat may distort or crack the cards. | 634 |
TIRUPUR
2177.
2178.
ABT LIMITED (4101-Y7-09), NO. 4, SABHAPATHI
PURAM, NEAR TMF HOSPITAL, TIRUPUR -
641601
PH :95009 98368.
SHASHTI CAR PVT LTD (Y701-Y7-01), SRI
PADMINI GARDENS, KANGEYAM ROAD, OPP.
ST JOSEPH SCHOOL, TIRUPUR - 641604
PH :044-2430275/ 2430276.
2165.
2166.
PILLAI & SONS MOTOR CO. (E701-LJ-03),
THANJAI NAGARI ROAD, OPP. TO S. P. OFFICE
- 610001
PH :04366-250250, 9442163707.
PILLAI & SONS MOTOR COMPANY (LJ01-LJ-01),
NO. 9, WARD NO.-4, BLOCK NO. 10, NEW SY.
NO. 601/6B1, SUNDARAVILAGAM,
NARSINGHAMPET, THIRUVARUR TOWN &
DIST., TAMIL NADU - 610001
PH :9442163509.
THISAYANVILLAI
2167.
AADHI CARS PVT. LTD. (CVL1-CVL-01), SURVEY
NO. 240/1, 7/1, HIGHWAYS ROAD, OPP. TO VO
OFFICE, SELVA MARUTHUR, THISAYANVILLAI. -
627 657
PH :7339511187.
THUCKALAY
2168. | What is the contact number for ABT LIMITED in Tirupur? | The contact number for ABT LIMITED in Tirupur is 95009 98368. | 1,361 |
OTHER CONTROLS AND EQUIPMENT
Remote Audio Controls
(if equipped)
Controlling basic functions of the audio
system is available using the switches on
the steering wheel.
The remote audio switches are available
when the engine switch is in ACC or ON
mode.
• For operation of an audio system or a
navigation system, refer to the supple-
mentary manual, provided along with it.
• The operating procedure may be differ-
ent depending on an audio system or a
navigation system.
(1)
(3)
(4)
(4)
(2)
(5)
(6)
(1) Volume switch
(2) Mute switch
55TB07004
(3) “MODE” switch
(4) Select switch
(5) Hands-free switch
(6) Voice recognition switch
Volume Switch (1)
You can adjust volume with this switch.
• To increase the volume, press “+” side.
• To decrease the volume, press “–” side.
• The volume will continue to increase or
decrease until this switch is released.
Mute Switch (2)
To mute this sound, press the switch (2). | What is the purpose of the volume switch on the steering wheel? | The purpose of the volume switch on the steering wheel is to adjust the volume of the audio system. By pressing the "+" side, the volume increases, and by pressing the "-" side, the volume decreases. The volume will continue to increase or decrease until the switch is released. | 670 |
DELHI
DELHI
34.
35.
36.
37.
38.
39.
40.
RANA MOTORS (08NE-08-01), B-242, OKHLA
INDUSTRIAL AREA PHASE 1, OKHLA, NEW
DELHI - 110020
PH :7290030289,
9290030288.
TR SAWHNEY (08NN-08-01), C-46, OKHLA
INDUSTRIAL AREA PHASE 2, OKHLA NEW
DELHI - 110020
PH :9953350008.
PLATINUM MOTORS (08NQ-08-01), PLOT
NO-H4,BLOCK-B1,MOHAN CO-OPERATIVE
INDEX,MATHURA ROAD,PIN-110044 - 110044
PH :9811386000,
8860200000.
MAGIC AUTO (08NA-08-01), CISF GATE NO 1,
D-21, CORPORATE PARK, NEAR DWARKA
SEC-8 METRO STATION, NEW DELHI - 110075
PH :9873052000.
AAA VEHICLEADES (08NW-08-01), BLOCK C,
NAJAFGARH ROAD INDUSTRIAL AREA, NEW
DELHI, DELHI 110015 - 110015
PH :8750611111.
COMPETENT AUTO (08NF-08-01), PLOT
NO-34,RAJASTHAN UDYOG NAGAR, GT AKRNAL
ROAD ,DELHI - 110033
PH :9932049425.
JAGMOHAN MOTORS (08NX-08-01),
C133-136(PART, PHASE I, INDUSTRIAL AREA,
MANGOLPURI S BLOCK, NEW DELHI, DELHI
110083 - 110083
PH :9812259000.
MARGAON (GOA)
GOA
41. | What is the contact information for Rana Motors in Delhi? | The contact information for Rana Motors in Delhi is B-242, Okhla Industrial Area Phase 1, Okhla, New Delhi - 110020. Their phone numbers are 7290030289 and 9290030288. | 906 |
Driving time
NOTE:
When you reconnect the negative (–) ter-
minal to the lead-acid battery, the value of
average speed will be shown after driving
for a period of time.
(5-minute average speed)
(11)
52RM21120
(10)
(11) Driving time
52RM21110
(10) 5-minute average speed
You can check transition of 5-minute aver-
age speed every 5 minutes from 10 min-
utes before up to now.
Driving time from previous reset is shown.
To reset the driving time, push and hold the
indicator selector knob (3) for about 2 sec-
onds when the display indicates a driving
time. The display shows “---” and then indi-
cates a new driving time after driving for a
short time.
NOTE:
• Disconnection of the lead-acid battery
negative (-) terminal will reset the indica-
tion of the driving time.
• The indicated maximum value of driving
time is 99:59:59. No more than this
value will be indicated on the display
until you reset the driving time.
INSTRUMENT CLUSTER | How can you reset the driving time displayed on the instrument cluster? | To reset the driving time displayed on the instrument cluster, you need to push and hold the indicator selector knob for about 2 seconds when the display indicates a driving time. The display will show "---" and then indicate a new driving time after driving for a short time. | 290 |
TALLADA
2316.
MITHRA AUTO (SOU1-SOU-01), SURVEY NO
890/A, D.NO 7-8, NARAYANAPURAM, TALLADA,
TELANGANA - 507167
PH :8886063527.
TANDUR
2317.
VARUN MOTORS PVT. LTD. (CFR1-CFR-01), H.
NO. 2-1-20/3, 2-1-20/3/A & 2-1-20/9, PLOT NO. 45,
46, 47, SURVEY NO. 57 OF MALREDDYPALLY
VILLAGE, TANDUR MUNICIPALITY, VIKARABAD
DISTRICT, TELANGANA. - 501141
PH :8886619370.
THORRUR
2318.
ADARSHA AUTOMOTIVES PVT LTD
(BYV1-BYV-01), SURVEY NO.1 TO 5, BEARING
M. NO.4-153/1, VILLAGE & MANDAL THORRUR
DISTT. WARANGAL - 506163
PH :9059438007, 7799790527.
TOOPRAN
2319.
ADARSHA (SEJ1-SEJ-1), PLOT NO 7&8, SY NO
185,184,179U, NAGULAPALLY
VILLAGE,TOOPRAN MANDAL,TELANGANA
STATE: TELANGANA CITY: TOOPRAN PIN :
502334 CITY CATEGO - 502334
PH :9291859954.
VIKARABAD
2320.
GEM MOTORS (INDIA) PVT. LTD.
(BYM1-BYM-01), SHOP NO. 3-2-93/2, VILLAGE –
YENNAPALLY, VIKARABAD MUNCIPALITY,
VIKARABAD, DISTRICT – RANGA REDDY,
TELANGANA . - 501101
PH :9912349840.
WANAPARTHY
2321. | What is the contact number for the Mithra Auto in Tallada? | The contact number for Mithra Auto in Tallada is 8886063527. | 1,392 |
11-3
55TH0-74E
Washing by hand
80J303
When washing the vehicle, park it in the
place where direct sunlight does not fall on
it as much as possible and follow the
instructions below:
1) Flush the underside of body and wheel
housings with pressurized water to
remove mud and debris. Use plenty of
water.
NOTICE
When washing the vehicle:
• Avoid directing steam or hot water
of more than 80°C (176°F) on plas-
tic parts.
• To avoid damaging engine compo-
nents, do not use pressurized
water in the engine compartment.
68PM09005
2) Rinse the body to loosen the dirt.
Remove dirt and mud from the body
exterior with running water. You may
use a soft sponge or brush. Do not use
hard materials which can scratch the
paint or plastic. Remember that the
headlight covers or lenses are made of
plastic in many cases. | What precautions should be taken when washing the vehicle? | When washing the vehicle, it is important to park it in a place where direct sunlight does not fall on it as much as possible. Additionally, it is advised to flush the underside of the body and wheel housings with pressurized water to remove mud and debris. It is important to avoid directing steam or hot water of more than 80°C (176°F) on plastic parts and to not use pressurized water in the engine compartment. When rinsing the body, it is recommended to use running water and a soft sponge or brush, avoiding hard materials that can scratch the paint or plastic. It is also important to be cautious with plastic headlight covers or lenses. | 808 |
• Driving with insufficient tyre pressure
can cause the sides of the tyre to wear,
in addition to decreasing fuel efficiency.
69RHS173
• If the specified tyre pressure is not
maintained, the full performance of
the vehicle cannot be achieved and
the following could occur, leading
to accidents or malfunctions.
Adjust the tyre pressure as speci-
fied.
– Decreased driving stability
– Longer distance required for brak-
ing
(Continued)
5-2
55TH0-74E
OPERATING YOUR VEHICLE
WARNING
(Continued)
– Accurate tyre rotation speed can-
not be detected, which interferes
with the following functions:
• ABS
• Electronic stability program
(ESP®)
To adjust the tire pressure, refer to “Tyres”
in “INSPECTION AND MAINTENANCE”
section.
Check the Exhaust Pipe
Ignition Switch (Vehicle
without Keyless Push Start
System) (if equipped)
Periodically check the exhaust pipes for
holes or cracks.
80J011
WARNING | What are the potential consequences of driving with insufficient tire pressure? | The potential consequences of driving with insufficient tire pressure include increased wear on the sides of the tire, decreased fuel efficiency, decreased driving stability, longer braking distance, and interference with functions such as ABS and Electronic Stability Program (ESP). | 348 |
ADAMPUR (HARYANA)
HARYANA
546.
SARAOGI AUTOMOBILES (P) LTD.
(CWW2-CWW-01), KEWAT NO. 663, KHAT NO.
1147, KHESRI NO. 44/21/1/2(1-0), MANDI
ADAMPUR, TEHSIL - ADAMPUR, DIST.-HISSAR,
STATE - HARYANA. - 125052
PH :8607777153.
AMBALA
547.
MODERN AUTOMOBILES (1801-18-01), MODEL
TOWN CROSSING, G.T.ROAD, AMBALA,
HARYANA. - 134003
PH :9215016044.
548.
549.
550.
551.
MODERN AUTOMOBILES (1801-18-02), NEAR
AMAR PALI RESTAURANT, G.T. ROAD, AMBALA
- 134003
PH :9215016044.
EAKANSH WHEELS (1802-18-01), STONE NO.
126, JAGADARI ROAD, VILLAGE TEPLA,
AMBALA - 133001
PH :9991703000.
EAKANSH WHEELS (1802-18-03), PLOT NO. 8,
BASANT VIHAR, BEHIND SWASTIK MARBLE,
NEAR MOTOR MARKET, AMBALA CITY,
HARYANA - 133001
PH :88813874888.
TR SAWHNEY (1803-18-01), JAGGI GARDEN,
BALDEV NAGAR, OPPOSITE AMBALA
PASSPORT OFFICE, AMBALA - 134003
PH :9990110068.
ASSANDH
552.
KARNAL MOTORS PVT. LTD. (8906-CS-04), OPP.
NEW GRAIN MARKET, KARNAL ROAD
ASSANDH, DISTT. KARNAL - 272032
PH :7082111325. | What is the contact number for Modern Automobiles in Ambala? | The contact number for Modern Automobiles in Ambala is 9215016044. | 1,048 |
MOINABAD
2287.
GEM MOTORS (INDIA) PVT. LTD.
(CFN1-CFN-01), SURVEY NO. 70, PLOT NO. 4,
VILLAGE AND GRAM PANCHAYAT – HIMAYATH
NAGAR, MANDAL – MOINABAD, DISTRCT –
RANGA REDDY. - 500075
PH :9912899128, 7997994845.
NAGARKURNOOL
Dealer Workshop (AS ON 31.05.2023 )
2288.
SRI JAYARAMA MOTORS PVT. LTD.
(EV01-EV-01), SURVEY NO.44/A AND 45/A,
UYYALWADA VILLAGE, NAGARKURNOOL,
TELANGANA - 509209
PH :8096990074.
NALGONDA
2289.
PAVAN MOTORS PVT. LTD (AN01-AN-01),
CHERLAPALLY VILLAGE, NALGONDA ROAD,
NALGONDA - 508001
PH :8790902146.
NARAYANKHED
2290.
VARUN MOTORS PVT. LTD. (CGI1-CGI-01), D.
NO. 1-6-111/25/B/5/A/1, SY NO. 57/2, BHUMAN
COLONY, GRAM PANCHAYAT & MANDAL -
NARAYANKHED, DISTRICT – MEDAK,
TELANGANA. - 502286
PH :9885210555.
2296.
VARUN MOTORS PVT. LTD. (CBO1-CBO-01),
HOUSE NO. 2-356 JANGAIAH COMPLEX,
SURVEY NO. 217/EE4, JAYANTHI NAGAR
COLONY, MANDAL – PARGI, DISTRICT – RANGA
REDDY. - 510501
PH :988521055, 9885200000.
PARKAL
2297. | What is the contact information for Sri Jayarama Motors Pvt. Ltd. in Nagarkurnool? | The contact information for Sri Jayarama Motors Pvt. Ltd. in Nagarkurnool is as follows:
Dealer Workshop (AS ON 31.05.2023)
2288.
SRI JAYARAMA MOTORS PVT. LTD.
(EV01-EV-01), SURVEY NO.44/A AND 45/A,
UYYALWADA VILLAGE, NAGARKURNOOL,
TELANGANA - 509209
PH :8096990074. | 1,386 |
55TB07003
NOTE:
If you need maximum defrosting, take the
following procedure:
1) Push the defrost switch (5) to turn on
the defroster (the air conditioning sys-
tem will come on and the fresh air posi-
tion (b) will be selected automatically).
2) Set the blower speed selector to HIGH.
3) Adjust the temperature selector to the
“HI” indication on the display.
4) Adjust the side outlets so the air blows
on the side windows.
OTHER CONTROLS AND EQUIPMENT
NOTICE
Using the wrong refrigerant may
damage your air conditioning sys-
tem. Use R-134a only. Do not mix or
replace the R-134a with other refrig-
erants.
How to Use Air Conditioning Sys-
tem Effectively
Parking under the blazing sun
After parking for a long time under the
blazing sun, the interior temperature can
become very high. Use the air conditioning
system, with the windows or doors opened
to ventilate the interior. | What should you do if you need maximum defrosting in your car? | To achieve maximum defrosting in your car, follow these steps:
1) Push the defrost switch to turn on the defroster.
2) Set the blower speed selector to HIGH.
3) Adjust the temperature selector to the "HI" indication on the display.
4) Adjust the side outlets so that the air blows on the side windows. | 665 |
• If you release your foot from the
brake pedal for more than 2 sec-
onds, the hill hold control system
will be canceled. If so, the vehicle
may roll downward, which can
result in an accident depending on
the degree of a slope. Also, the
engine may stall and the power
assist for the steering and brakes
will not work so steering and brak-
ing will be much harder than usual
which can result in an accident or
vehicle damage. After you release
your foot from the brake pedal,
accelerate the vehicle to move up
immediately.
5-110
55TH0-74E
OPERATING YOUR VEHICLE
Braking
WARNING
WARNING
Even without reserve power in the
brake system, you can still stop the
vehicle by pressing the brake pedal
harder than normally required. How-
ever, the stopping distance may be
longer. | What happens if you release your foot from the brake pedal for more than 2 seconds? | If you release your foot from the brake pedal for more than 2 seconds, the hill hold control system will be canceled. This can result in the vehicle rolling downward, potentially causing an accident depending on the slope. Additionally, the engine may stall and the power assist for the steering and brakes will not work, making steering and braking much harder than usual, which can also lead to accidents or vehicle damage. | 576 |
5-45
55TH0-74E
Conditions to stop the engine automatically
If all of the following conditions, the ENG A-STOP indicator light (green) in the instrument cluster will illuminate when the vehicle is
stopped and the engine will stop automatically.
OPERATING YOUR VEHICLE
Common
• The ABS or ESP® system has not been activated
• Brake booster vacuum pressure is normal
Manual transmission
• The gearshift lever is in “N” position
• The clutch pedal is released
Auto Gear Shift
• The vehicle is not stopped on a steep hill
• The gearshift lever is in “D” or “N” position
• The brake pedal is depressed appropriately (#)
#: The engine may not be stopped automatically if the brake pedal was depressed lightly or strongly. | Under what conditions will the ENG A-STOP indicator light illuminate and the engine stop automatically? | The ENG A-STOP indicator light will illuminate and the engine will stop automatically if all of the following conditions are met:
- For common vehicles: The ABS or ESP® system has not been activated and the brake booster vacuum pressure is normal.
- For vehicles with manual transmission: The gearshift lever is in the "N" position and the clutch pedal is released.
- For vehicles with Auto Gear Shift: The vehicle is not stopped on a steep hill, the gearshift lever is in the "D" or "N" position, and the brake pedal is depressed appropriately. However, please note that the engine may not be stopped automatically if the brake pedal was depressed lightly or strongly. | 458 |
AMBAJI
355.
TANU MOTORS (SKQ1-SKQ-01), OPP
KUMBHARIYA JAIN DERASAR, GIDC ROAD,
AMBAJI, DIST-BANASKANTHA, GUJARAT 385110
- 385110
PH :#REF!.
AMOD
356.
RAVIRATNA MOTORS (F801-ZE-03), ROYAL
PARK, JAMBUSAR-BHARUCH ROAD, AMOD,
DISTRICT: BHARUCH, GUJARAT. - 392110
PH :9687691106/9687699383.
AMRELI
357.
ALPHA AUTOLINK LLP (9E02-9E-01), LATHI BY
PASS ROAD, AMRELI, GUJARAT. - 365601
PH :9978938858/9978938833.
ANAND
358.
359.
AMAR CARS PVT. LTD. (F702-F7-01), JANTHA
CROSSING,SOJITRA ROAD,ANAND - 388121
PH :9909960772.
KATARIA AUTOMOBILES PVT. LTD.
(F703-F7-01), SURVEY NO. 189/1+2/A+3/A/K
190/P, OPP. OLD JAKAT NAKA, NEAR RAILWAY
OVERBRIDGE, ANAND-CHIKHODRA ROAD,
ANAND, GUJARAT. - 388 120
PH :7698954466.
ANKLAV
360.
KATARIA AUTOMOBILES (SEO1-SEO-01),
AMBICA COMPLEX, GROUND FLOOR SHOP NO.
B, C AND D, ASODAR CHOKDI, TAL. ASODAR,
CITY ANKLAV, DIST. ANAND, PIN-388510,
GUJARAT - 388510
PH :7227917151.
ANKLESHWAR
361. | What is the contact information for the car dealership in Ambaji, Gujarat? | The contact information for the car dealership in Ambaji, Gujarat is as follows:
TANU MOTORS (SKQ1-SKQ-01), OPP KUMBHARIYA JAIN DERASAR, GIDC ROAD, AMBAJI, DIST-BANASKANTHA, GUJARAT 385110 - 385110
PH :#REF!. | 1,013 |
If this light blinks or stays on, there is a prob-
lem with the system.
If this light still blinks or stays on even if
you start the engine with normal voltage of
the vehicle battery, ask a Maruti Suzuki
authorized workshop to have the system
inspected.
INSTRUMENT CLUSTER
NOTE:
If any abnormality of the turn signals is
observed, such as fast blinking, there may
be a malfunction in the turn signal system.
Ask your Maruti Suzuki authorized work-
shop to inspect the system.
Main Beam (High beam) Indicator
Light
80J212
This indicator comes on when headlight
main beams (high beams) are turned on.
Illumination Indicator Light
59RN04690
When you turn on the left or right turn sig-
nals, the corresponding green arrow on the
instrument panel will blink along with the
respective turn signal lights. When you
turn on the hazard warning switch, both
arrows will blink along with all of the turn
signal lights. | What does it mean if the Main Beam (High beam) Indicator Light comes on? | The Main Beam (High beam) Indicator Light comes on when the headlight main beams (high beams) are turned on. | 333 |
• Brake fluid can damage painted
surfaces. Be careful when refilling
the reservoir.
9-16
55TH0-74E
INSPECTION AND MAINTENANCE
Brake Pedal
Check brake pedal stroke. If the stroke is
so large, have the brake system inspected
by a Maruti Suzuki authorized workshop. If
you doubt the brake pedal is at its normal
height, check it as follows:
“a”
Minimum distance between brake pedal
and floor carpet “a”
54G108
53 mm
With the engine running, measure the dis-
tance between the brake pedal and floor
carpet when the pedal is depressed with
approximately 30 kg of force. The mini-
mum distance required is as specified.
Since your vehicle’s brake system is self-
adjusting, there is no need for pedal
adjustment.
If the pedal to floor carpet distance as
measured above is less than the minimum
required, have your vehicle
distance
9-17
inspected by a Maruti Suzuki authorized
workshop. | What should you be careful of when refilling the brake fluid reservoir? | You should be careful not to damage painted surfaces when refilling the brake fluid reservoir. | 727 |
JAISALMER
1869.
LMJ SERVICES LTD. (5L01-5L-01), PLOT NO.36,
37, MAHESH REFUGEE COLONY,HDC SOCIETY,
DABLA ROAD, JAISALMER (RAJASTHAN) -
345001
PH :8005898360.
JAITARAN
1870.
LMJ SERVICES LTD. (BNY1-BNY-01), KHASRA
NO. 784, JAIPUR-JODHPUR BYE PASS ROAD,
JAITARAN, DIST.-PALI. - 306302
PH :9269971266.
JALORE
1871.
SHRI KRISHNA AUTOSALES PVT LTD
(VD01-VD-01), KHASRA NO.6809/2616, 2623,
INDUSTRIAL AREA, JALORE-BHINMAL ROAD,
JALORE - 343001
PH :2973211613,9829203644.
JAMWA RAMGARH
1872.
K P AUTOMOTIVES PVT LTD (BZL1-BZL-01),
KHASRA NUMBER -228/169,OPP UDAY
AUTOMOBILES,JAIPUR ALWAR ROAD –JAMWA
RAMGRAH. - 303109
PH :6377203709, 6377203731.
JHADOL
1873.
TECHNOY MOTORS (SKO1-SKO-01), KHASRA
NO. 186/1, NH # 8, NEAR ASHOK LEYLAND
WORKSHOP, SARDARPURA, SOJAT,
PIN-306104, RAJASTHAN - 306104
PH :7726809510.
JHALAWAR
1874. | What is the contact number for LMJ Services Ltd. in Jaisalmer? | The contact number for LMJ Services Ltd. in Jaisalmer is 8005898360. | 1,298 |
Fuses
Your vehicle has three types of fuses, as
described below:
Main fuse
The main fuse takes current directly from
the lead-acid battery.
Primary fuses
These fuses are between the main fuse
and individual fuses, and are for electrical
load groups.
Individual fuses
These fuses are for individual electrical cir-
cuits.
To remove a fuse, use the fuse puller pro-
vided in the relay box cover.
(2)
(1)
(1) Fuse puller
(2) Spare fuse
74TB09005
9-24
55TH0-74E
INSPECTION AND MAINTENANCE
Fuses in Engine Compartment
Relay box
(4)
(4)
(3)
(3)
)
6
(
)
7
(
)
8
(
)
9
(
)
0
1
(
)
1
1
(
)
2
1
(
)
3
1
(
)
4
1
(
)
5
1
(
)
6
1
(
)
7
1
(
)
8
1
(
)
9
1
(
)
0
2
(
)
1
2
(
)
2
2
(
)
3
2
(
)
4
2
(
)
5
2
(
)
6
2
(
)
7
2
(
)
8
2
(
)
9
2
(
(30)
(31)
(32)
(33)
55TB0906
56RS00705
MAIN FUSE / PRIMARY FUSE
(3) Main fuse box
(4) Relay box
Main fuse box
For K12N
For K10C
(5)
(5)
(4)
(4)
(3)
(3)
(2)
(2)
(5)
(5)
(4)
(4)
(3)
(3)
(2)
(2)
(34) | What are the three types of fuses in the vehicle? | The three types of fuses in the vehicle are the main fuse, primary fuses, and individual fuses. | 745 |
2428.
CONCEPT CARS PVT. LTD. (QE01-QE-04), PLOT
NO. 1609 & 1605 GANGA BUX PURVA, BILGRAM
ROAD, HARDOI KANPUR HIGHWAY, HARDOI,
UTTAR PRADESH. - 241001
PH :7607696666, 8756000000.
HATHRAS
2429.
DEV MOTORS (P) LTD (B601-LP-03), NEAR
NAGLA UMMED, ALIGARH ROAD, HATHRAS -
204101
PH :9917435500.
IGLAS
2430.
DEV MOTORS (SOD1-01-SOD-01), MATHURA
ROAD, IGLAS, DISTRICT ALIGARH. - 202124
PH :9837549000.
ITUNJA
2431.
BRIGHT 4 WHEEL (SJD1-01-SJD-01), 90M GATA
GRAM MANDOLI, ITTAUNJA, LUCKNOW, UTTAR
PRADESH-226203. - 226203
PH :7011482503.
JAGDISHPUR
2432.
BRIGHT 4 WHEEL SALES PVT. LTD.
(XC01-XC-01),
KATHORA,MUSAFIRKHANA,LUCKNOW
SULTANPUR ROAD,JAGDISPUR-UTTAR
PRADESH - 227817
PH :9721526961 , 9628374814.
JAGNER
2433.
MERAK VEHICLES (SPJ1-SPJ-01), SHRI RAM
GARDEN, AGRA ROAD, NEAR RADHA KRISHNA
MANDHIR, JAGNER, UTTAR PRADESH, 283115 -
283115
PH :7896500400.
JALALABAD
2434. | What is the contact information for Concept Cars Pvt. Ltd. in Hardoi, Uttar Pradesh? | The contact information for Concept Cars Pvt. Ltd. in Hardoi, Uttar Pradesh is as follows:
Address: Plot No. 1609 & 1605 Ganga Bux Purva, Bilgram Road, Hardoi Kanpur Highway, Hardoi, Uttar Pradesh - 241001
Phone Numbers: 7607696666, 8756000000. | 1,411 |
Engine Oil Pressure Warning Light
Charge Warning Light
INSTRUMENT CLUSTER
80J223
80J226
This light comes on when the ignition
switch is turned to “ON” position or the
engine switch is pressed to change the
ignition mode to ON, and goes out when
the engine is started. The light will come
on and remain on if there is insufficient oil
pressure. If the light comes on when driv-
ing, pull off the road as soon as you can
and stop the engine.
Check the oil level and add oil if necessary.
If there is enough oil, the lubrication sys-
tem should be inspected by a Maruti
Suzuki authorized workshop before you
drive the vehicle again. | What should you do if the Engine Oil Pressure Warning Light comes on while driving? | If the Engine Oil Pressure Warning Light comes on while driving, you should pull off the road as soon as you can and stop the engine. Then, check the oil level and add oil if necessary. If there is enough oil, it is recommended to have the lubrication system inspected by a Maruti Suzuki authorized workshop before driving the vehicle again. | 328 |
1) Pull off the road and stop carefully.
WARNING
Remember that stopping distance
may be longer, you may have to push
harder on the pedal, and the pedal
may go down farther than normal.
2) Test the brakes by carefully starting and
stopping on the shoulder of the road.
3) If you determine that it is safe, drive the
vehicle cautiously at low speed to the
nearest Maruti Suzuki authorized work-
shop for repairs or tow the vehicle to
the nearest Maruti Suzuki authorized
workshop for repairs.
INSTRUMENT CLUSTER
WARNING
If any of the following conditions
occur, you should immediately ask a
Maruti Suzuki authorized workshop
to inspect the brake system.
• If the brake system warning light
does not go out after the engine
has been started and the parking
brake has been fully released.
• If the brake system warning light
does not come on when the engine
switch is pressed to change the
ignition mode to ON. | What should you do if you determine that it is safe to drive the vehicle after testing the brakes? | If you determine that it is safe to drive the vehicle after testing the brakes, you should drive the vehicle cautiously at low speed to the nearest Maruti Suzuki authorized workshop for repairs or tow the vehicle to the nearest Maruti Suzuki authorized workshop for repairs. | 318 |
984.
POPULAR VEHICLE (1601-BQT-14), RE SURVEY
NO 581/5, BLOCK NO 33, ANCHAL VILLAGE,
NEAR ALBILAL DRIVING SCHOOL, KAITHADY
JUNCTION, ANCHAL, KERALA - 691306
PH :9778698200.
ANGAMALY
985.
986.
INDUS MOTOR COMPANY PRIVATE LIMITED
(2702-JW-0F), ANGAMAALY KALADY ROAD, MC
ROAD, ANGAMALY - 683572
PH :9745998434.
POPULAR VEHICLES & SERVICES LTD.
(2701-JW-0D), 182-AIRPORT JUNCTION
NAGAR,M. C. ROAD,ANGAMALY - 683572
PH :8086078886.
ATTINGAL
987.
988. | What is the contact information for Popular Vehicles & Services Ltd. in Angamaly? | The contact information for Popular Vehicles & Services Ltd. in Angamaly is as follows:
Address: 182-Airport Junction Nagar, M.C. Road, Angamaly - 683572
Phone Number: 8086078886 | 1,131 |
Dealer Workshop (AS ON 31.05.2023 )
ITANAGAR
114.
115.
116.
BUISHI YADA MOTORS (7501-75-01), A'
SECTOR, NAHARLAGUN, ARUNACHAL
PRADESH. - 791110
PH :9436268870.
BUISHI YADA MOTORS (7501-75-04), MODEL
VILLAGE, BEFORE GOVERNMENT HIGHER
SECONDARY SCHOOL, NAHARLAGUN,
ITANAGAR - 791110
PH :8257075033.
D Y MOTORS (7502-75-01), LPC NO -
DC/ICC/LPC, BORUM VILLAGE, PO/PS-
NAHARLAGUN, PAPUM PARE DIST,
ARUNACHAL PRADESH - 791100
PH :8415075164.
PASSIGHAT
117.
BUISHI YADA MOTORS (7501-8A-03),
PASSIGHAT BAZAR, PASSIGHAT, ARUNACHAL
PRADESH - 791102
PH :9402878414.
RUKSIN
118.
ZIRO
119.
DY MOTORS (SHZ1-SHZ-01), RUKSIN IN EAST
SIANG DISTRICT, ARUNACHAL PRADESH -
787060
PH :8415075164.
BUISHI YADA MOTORS (CHM1-CHM-01),
HAPOLI, NEAR TELECOMMUNICATION CENTRE,
ZIRO, ARUNACHAL PRADESH. - 791120
PH :9732010858.
BAIHATA CHARIALI
ASSAM
120. | Where is the Buishi Yada Motors located in Itanagar? | Buishi Yada Motors in Itanagar is located in A' Sector, Naharlagun, Arunachal Pradesh. | 967 |
(1) Qualification:
To qualify for this warranty the vehicle must be delivered by a
Maruti Suzuki authorised dealer and set-up, and serviced by a
Maruti Suzuki authorised workshop.
(2) Term:
The term of the warranty shall be twenty-four (24) months or
40,000 kilometers (whichever occurs first) from the date of
invoice to the first owner. | What are the qualifications for the warranty to be valid? | To qualify for the warranty, the vehicle must be delivered by a Maruti Suzuki authorised dealer and set-up, and serviced by a Maruti Suzuki authorised workshop. | 12 |
• When opening a door, be careful of
the surrounding area. An accident,
such as a collision with the vehicle
or a pedestrian behind your vehi-
cle, may occur. Be very careful
when opening a door especially on
a windy day.
• When a child opens or closes a
door, his / her hands, legs or head
may be caught in the door and this
may cause injury. Opening or clos-
ing a door should be performed not
by a child but by an adult.
55TH0-74E
Side Door Locks
(1)
(4)
(1) UNLOCK
(2) LOCK
(3) Front
(4) Rear
CAUTION
• When a child opens or closes a
door, his / her hands, legs or head
may be caught in the door and this
may cause injury. Opening or clos-
ing a door should be performed not
by a child but by an adult.
• When the tailgate
is not fully
opened, it may be unexpectedly
closed and this may cause injury.
When opening the tailgate, open it
fully. | What caution should be taken when opening a door, especially on a windy day? | When opening a door, especially on a windy day, it is important to be very careful of the surrounding area. An accident, such as a collision with another vehicle or a pedestrian behind your vehicle, may occur. | 171 |
Average fuel consumption
If you selected average fuel consumption
the last time you drove the vehicle, the dis-
play shows the last value of average fuel
consumption from previous driving when
the ignition switch is turned to “ON” posi-
tion or the engine switch is pressed to
change the ignition mode to ON. Unless
you reset the value of average fuel con-
sumption, the display indicates the value of
average fuel consumption which includes
average fuel consumption during previous
driving.
To reset the average fuel consumption,
push and hold the indicator selector knob
(2) for a while when the display shows the
average fuel consumption.
NOTE:
When you reset the indication or reconnect
the negative (–) terminal to the lead-acid
battery, the value of average fuel con-
sumption will be shown after driving for a
while.
55TH0-74E | How can you reset the average fuel consumption display in the vehicle? | To reset the average fuel consumption display in the vehicle, you need to push and hold the indicator selector knob for a while when the display shows the average fuel consumption. | 260 |
KAYAMKULAM
1052.
1053.
INDUS MOTOR COMPANY PRIVATE LIMITED
(2702-8L-05), KARIYILAKULANGARA,
KAYANKULAM P.O., ALAPPUZHA DISTT. -
690572
PH :9745998005.
POPULAR VEHICLES & SERVICES LTD.
(B802-8L-03), NH 47, KOTTUKULANGARA,
KAYAMKULAM P.O., ALAPPUZHA DISTT. -
690502
PH :9946105601.
KODUNGALLUR
1054.
SAI SERVICE PRIVATE LIMITED (2705-8K-03),
NH-17,T.K.S.PURAM,,KODUNGALLOOR - 680667
PH :9645106571.
1055.
INDUS MOTOR COMPANY PRIVATE LIMITED
(8K02-8K-01), RE-SURVEY NO. 116/1-6, 116/2-5,
BUILDING NO. 560/A, WARD NO. VII, AALA
VILLAGE, (OLD
VILLAGE-SREENARAYANAPURAM),
KODUNGALLUR TALUK, MADHILAKOM SRO,
SANTHIPURAM PO, THRISSUR DIST., KERALA -
680 008
PH :9747513444.
KODUVALLY
1056.
A M MOTORS (BGX1-BGX-01), SURVEY NO:91/9,
91/10,NALLANKADY, VAVAD POST, KODUVALLY,
KOZHIKODE DISTRICT, KERALA - 673572
PH :9895979023.
KOLANCHERRY
1057. | What is the contact number for Popular Vehicles & Services Ltd. in Kayamkulam? | The contact number for Popular Vehicles & Services Ltd. in Kayamkulam is 9946105601. | 1,145 |
NOTE:
• Any attempt to remove the tag from the
windscreen will result in permanent dam-
age to the tag.
• Use of chemical cleaners to clean the
is
windscreen area where
mounted can damage the tag.
tag
the
• Use of any sharp objects on the tag can
damage the tag.
12-2
55TH0-74E
SPECIFICATIONS
High Security Registration
Plate (HSRP) (if applicable)
As per Ministry of Road Transport and
Highways, every new vehicle must have
HSRP.
HSRP contains;
• Front and rear HSRP, which will be fitted
with 2 snap-locks each on number plate
area.
• Third license plate on front windshield.
Third License Plate
(1)
(1) Third license plate
64MM01005
12-3
Third license plate - As seen from out-
side of the vehicle
(a)
(c)
(e)
F
:
XXXXXXXX
-
-
R XXXXXXXX
R
:
(b)
(d)
64MM01008 | What is the purpose of the High Security Registration Plate (HSRP)? | The purpose of the High Security Registration Plate (HSRP) is to comply with the regulations set by the Ministry of Road Transport and Highways, which requires every new vehicle to have HSRP. | 824 |
55T090070
NOTE:
• When you install a new filter, check that
the UP mark (3) faces upward.
• When you install the cover, check that
the UP mark (4) faces upward.
Preparation Before Winter
Season
Windshield Washer Fluid
To prevent windshield washer fluid from
freezing, dilute it by the ratio according to
outside temperature.
lead-acid battery. When
Lead-acid Battery
Check the liquid measure and the specific
gravity of
it
becomes cold, the battery performance
gets worse. Also, it becomes difficult to
start the engine by the weak battery. Refer
to “Battery” in the “INSPECTION AND
MAINTENANCE” section.
Engine Coolant
To prevent the inside of engine from cor-
roding and freezing, use the designated
engine coolant. Refer to “Specifications” in
the “SPECIFICATIONS” section.
NOTE:
To check the concentration of engine cool-
ant or replace it, ask a Maruti Suzuki
authorized workshop.
INSPECTION AND MAINTENANCE | What should you check when installing a new filter? | When installing a new filter, you should check that the UP mark faces upward. | 765 |
WARNING
• Do not modify the steering wheel,
such as replacing it, placing stick-
ers on it, painting it or putting the
cover on it.
• Do not place stickers on the airbag
units or the surrounding areas or
paint them. Also, do not attach any
elec-
accessories,
tronic toll control units, portable
car navigation systems, etc. to this
area, and do not lean umbrellas or
other objects against it.
fragrances,
• Do not attach accessories (except
for Maruti Suzuki genuine prod-
ucts), etc., to the windshield or the
inside rearview mirror.
55TH0-74E
Warning Label of SRS Airbag for
Front Passenger’s Seat
Description of warning label
Symbol
Symbol meaning
“SRS AIRBAG” Mark and Location
Driver’s front airbag
FOR SAFE DRIVING
Do not
install a
child
rear-facing
restraint system to
front passen-
the
ger’s seat equipped
with an airbag. | What are some modifications that should not be done to the steering wheel according to the car manual guide? | According to the car manual guide, some modifications that should not be done to the steering wheel include replacing it, placing stickers on it, painting it, or putting a cover on it. | 138 |
NOTE:
If you depress both the accelerator pedal
and the brake pedal simultaneously while
driving, the engine power output may be
suppressed.
55T060040
WARNING
• Do not operate a mobile phone, etc.
while driving. Being distracted by
phone operation could lead to an
accident.
• Do not operate navigation/audio
equipment, etc. while driving. Oth-
erwise, there is the danger of an
accident due to being distracted.
6-2
55TH0-74E
What Should You Do in Case of Mal-
function or Emergency?
• Warning light turns on
Stop immediately in a safe place and
take corrective action.
For details, refer to “Warning Lights and
Indicators” in the “QUICK GUIDE” sec-
tion or “Warning and indicator mes-
sages”
“INSTRUMENT
the
CLUSTER”.
in
• You feel strong shock from under the | What should you do if the warning light turns on while driving? | You should stop immediately in a safe place and take corrective action. | 589 |
NOTICE
To avoid damage to the paint or plas-
tic surface, do not wipe the dirt off
without ample water. Follow
the
above procedure.
3) Wash the entire exterior with a mild
detergent or car wash soap using a
sponge or soft cloth. The sponge or
cloth should be frequently soaked in the
soap solution.
APPEARANCE CARE
NOTICE
When using a commercial car wash
product, observe the cautions speci-
fied by the manufacturer. Never use
strong household detergents or
soaps.
4) Once the dirt has been completely
removed, rinse off the detergent with
running water.
5) Wipe off the vehicle body with a wet
chamois or cloth and allow it to dry in
the shade.
6) Check carefully for damage to painted
surfaces. If there is any damage, touch
up the damage following the procedure
below:
1. Clean all damaged spots and allow
them to dry.
2. Stir the paint and touch up the dam-
aged spots lightly using a small
brush. | What should be done before wiping off dirt from the car's exterior? | Before wiping off dirt from the car's exterior, it is important to wash the entire exterior with a mild detergent or car wash soap using a sponge or soft cloth. The sponge or cloth should be frequently soaked in the soap solution. | 809 |
GANGOLIHAT
LAKSAR
2579.
NAINITAL MOTORS (CODE UNDER
CREATIONS-CODE UNDER CREATIONS-CODE
UNDER CREATIONS), VILL- KHETIGARA,
PITHORAGARH-GANGOLIHAT ROAD,
GANGOLIHAT, DISTT: PITHORAGARH - 262522
PH :9997093043.
GOPESHWAR
2580.
ROHAN MOTORS LTD. (5702-MV-03), CHOPTA
MANDAL ROAD, NEAR FOREST GATE,
GOPESHWAR - 131028
PH :9634852898.
HALDWANI
2581.
2582.
NAINITAL MOTORS PVT LTD (J603-J6-01),
VILLAGE JEETPUR NEGY, 5TH KM RAMPUR
ROAD, HALDWANI - 263139
PH :7060201024.
NAINITAL MOTORS PVT LTD (J603-J6-02), KALA
DUNGI ROAD, NEAR HARIPRIYA BANQUET
HALL, KATHGHARIYA, HALDWANI - 263139
PH :8126359222.
HARIDWAR
2583.
SHAKUMBARI AUTOMOBILES (P) LTD
(6N02-6N-01), E-5/6, INDUSTRIAL AREA,
HARDWAR - 249407
PH :9897476897.
JASPUR
2584.
AKANKSHA AUTOMOBILES (RUDRAPUR) PVT
LTD (BKL2-BKL-01), GANGUWALA, INFRONT OF
ROOPAM CONVENT, KASHIPUR ROAD,
JASPUR, UTTARAKHAND. - 244712
PH :8958023786.
KARANPRAYAG
2585. | Where is the Nainital Motors located? | Nainital Motors is located in Gangolihat, Pithoragarh district, Uttarakhand. | 1,440 |
If the front passen-
ger’s
airbag
seat
were to be deployed,
a major impact could
be applied to a rear-
facing child restraint
system and the child.
For more details, read
this owner’s manual.
6) Front passenger’s front airbag
55TB0202
You may find this label on the sun visor.
72M00150
WARNING
NEVER use a rearward facing child
restraint on a seat protected by an
ACTIVE AIRBAG in front of it, DEATH
or SERIOUS INJURY to the CHILD
can occur.
74TB02001
2-40
55TH0-74E
FOR SAFE DRIVING
Side airbags (if equipped)
Side curtain airbags (if equipped)
55T020450
The driver’s front airbag is located behind
the center pad of the steering wheel and
55T020460
2-41
front airbag
front passenger’s | What is the warning regarding the use of a rearward facing child restraint on a seat protected by an active airbag? | The warning states that using a rearward facing child restraint on a seat protected by an active airbag can result in death or serious injury to the child. | 139 |
1791.
1792.
1793.
1794.
AJMER AUTO AGENCIES PVT. LTD.
(B201-B2-01), SRINAGAR ROAD,AJMER
(RAJASTHAN) - 305001
PH :9314955201.
RELAN MOTORS (B203-B2-01), NEAR BIRLA
WATER TANK, PARABATPURA BYEPASS,
AJMER - 305001
PH :95876 87000, 84400 41027.
RELAN MOTORS (B203-B2-02), F-243 RIICO
INDUSTRIAL AREA, PALRA, AJMER - 305001
PH :95876 87000, 87400 16329.
AJMER AUTO AGENCIES PVT. LTD.
(B201-B2-05), KHASRA NO.343/2, 344, 345, 347
GHUGHRA GHATI, JAIPUR ROAD, AJMER. -
305001
PH :9314955201.
AKLERA
1795.
BHATIA AND COMPANY (SGK1-SGK-01), NH-52,
RAM NAGAR COLONY, AKLERA, JHALAWAR,
PIN-326033, RAJASTHAN - 326033
PH :9057047891.
ZIRAKPUR
ALWAR
1796.
1797.
MG MOTORS (F901-F9-01), MUKESH GENERAL
FINANCE COMPANY, ROAD NO. 2, NEAR MEO
BOARDING, ALWAR - 301001
PH :9001795520.
MG MOTORS (F901-F9-02), KHASRA NO.803/198,
BHUGORE TIRAHA, NEAR ALWAR PUBLIC
SCHOOL, JAIPUR ROAD, ALWAR - 301001
PH :9001795520.
ANOOPGARH
1798. | Where is the nearest Ajmer Auto Agencies Pvt. Ltd. located? | The nearest Ajmer Auto Agencies Pvt. Ltd. is located at (B201-B2-01), Srinagar Road, Ajmer, Rajasthan - 305001. | 1,285 |
(cid:29)
(cid:29)
(cid:29)
(cid:29)
(cid:29)
(cid:54)(cid:40)(cid:53)(cid:57)(cid:44)(cid:38)(cid:40)(cid:3)(cid:49)(cid:40)(cid:55)(cid:58)(cid:50)(cid:53)(cid:46)(cid:3)(cid:11)(cid:36)(cid:54)(cid:3)(cid:50)(cid:49)(cid:3)(cid:22)(cid:20)(cid:17)(cid:19)(cid:24)(cid:17)(cid:21)(cid:19)(cid:21)(cid:22)(cid:12) | What is the purpose of the given context? | The purpose of the given context is unclear as it consists of a series of random characters and symbols. | 836 |
Driver + 4 pas-
sengers,
cargo added
Driver + full
cargo
75RM008
Level the headlight beam according to the
load condition of your vehicle by turning
this switch. The chart shows the appropri-
ate switch position for different vehicle load
conditions.
BEFORE DRIVING
Halogen headlight
Switch Position
0
0
1.5
NA
NA
3-20
55TH0-74E
BEFORE DRIVING
Lighting Control Lever
Automatic Light Operation
(if equipped)
(3) (4)
(2)
(1)
3-21
Your vehicle’s lighting system is controlled by two main systems: the lighting control lever
and the auto-on headlight system (when the lighting switch is in “AUTO” position).
The two systems work together to operate your lights as shown in the following chart:
ON: Lights ON
LIGHT: When it is light around the light sensor (5).
DARK: When it is dark around the light sensor (5).
Lighting
switch
position
Main lights to
be operated
Ignition switch in the
“LOCK” or “ACC” position /
Ignition mode
LOCK (OFF) or ACC | What is the purpose of the lighting control lever and the auto-on headlight system in the vehicle? | The purpose of the lighting control lever and the auto-on headlight system in the vehicle is to control and operate the lights of the vehicle based on the lighting conditions and the position of the ignition switch. | 224 |
Front Turn Signal Light and
Front Position Light
Vehicle with the bulb
Vehicle with the LED
For vehicle with the LED, Front turn signal
light and front position light replacement,
we recommend you to take your vehicle to
the Maruti Suzuki authorized workshop as
special procedure for the same is required.
(1)
(2)
(1)
(2)
74TB09011
1) Open the engine hood. To remove the
bulb holder of the front turn signal light
or the front position light from the light
housing, turn the holder counterclock-
wise and pull it out.
(2)
(3)
(4)
(1)
68PM00721
55TH0-74E
(3) Removal
(4) Installation
2) To remove the bulb of the front turn sig-
nal light (1) from the bulb holder, push
in the bulb and turn it counterclockwise.
To install a new bulb, push it in and turn
it clockwise. To remove and install the
bulb of the front position light (2), simply
pull out or push in the bulb. | What is the recommended procedure for replacing the front turn signal light and front position light in a vehicle with LED lights? | For vehicles with LED lights, it is recommended to take the vehicle to the Maruti Suzuki authorized workshop as a special procedure is required for the replacement of the front turn signal light and front position light. | 756 |
NOTE:
• If you start the engine without the gear-
shift lever in the “N” position, the gear
position indicator in the instrument clus-
ter will blink.
• When the engine restarts automatically
after engine A-Stop, the gear position
indicator in instrument cluster may dis-
play “N” temporarily. This is a normal
phenomenon.
Clutch operation
You can select either the Drive (D) mode or
the Manual (M) mode or the Reverse (R)
mode. Since this vehicle controls clutch
operation electronically in either mode, you
do not need to operate the clutch. | What does it mean if the gear position indicator in the instrument cluster blinks when starting the engine? | If the gear position indicator in the instrument cluster blinks when starting the engine, it means that the engine was started without the gearshift lever in the "N" (Neutral) position. | 409 |
4-44
55TH0-74E
INSTRUMENT CLUSTER
Malfunction Indicator Light
80J222
Your vehicle has a computer-controlled
emission control system. A malfunction
indicator light is provided on the instrument
panel to indicate when it is necessary to
have the emission control system serviced.
The malfunction indicator light comes on
when the ignition switch is turned to “ON”
position or the engine switch is pressed to
change the ignition mode to ON to let you
know the light is working and goes out
when the engine is started.
If the malfunction indicator light comes on
or blinks when the engine is running, there
is a damage in the emission control sys-
tem.
Bring the vehicle to a Maruti Suzuki autho-
rized workshop to have the damage fixed.
WARNING
If this light blinks, stop your vehicle
immediately in a safe place to avoid
catalyst's melting problem since
there may be a misfire in the engine.
• Do not drive or stop over such as | What does the malfunction indicator light on the instrument panel indicate? | The malfunction indicator light on the instrument panel indicates when it is necessary to have the emission control system serviced. | 325 |
• To change the setting, push the indicator
selector knob (3).
• To exit the setting mode, select “Back”
and push the indicator selector knob (3).
NOTE:
The currently selected setting item is sur-
rounded by a frame.
74TB04015
4-26
55TH0-74E
INSTRUMENT CLUSTER
NOTE:
• If you push and hold the indicator selec-
tor knob (3) to enter into the setting
mode when the display (D) shows aver-
age fuel consumption, average speed,
driving time, total idling stop time and
total idling fuel saved (if equipped), the
value will be reset simultaneously. If you
do not want to reset the value, push the
indicator selector knob quickly to switch
the indication of the display.
• If you turn the ignition switch, press the
engine switch or start to move the vehi-
cle when the display is in the setting
mode, the setting mode will be cancelled
automatically. | How do you exit the setting mode in the car? | To exit the setting mode in the car, you need to select "Back" and push the indicator selector knob (3). | 299 |
KIRAN MOTORS LTD (P601-CR-02), SHAMLAL JI
ROAD,SABARKANTHA DIST., MODASA - 383315
PH :8155995111.
MORBI
451.
452.
PERFECT AUTO SERVICES (5502-X5-07),
SURVEY NO. 351/2, PLOT NO. 10, DHARTI
INDUSTRIAL AREA, RAJPURA ROAD, SANALA,
MORBI , TEHSIL-MORBI, DISTT.-MORBI,
GUJARAT. - 363641
PH :9099058044, 9925199569, 9879499088.
DREAM VEHICLES (LC01-X5-03), NR. PRIME
FILLINGS, PLOT-6 ,DHARMASIDDHI
VILLAGE:MAHENDRANAGAR, TALUKA: MORBI,
DIST:MORBI. - 363642
PH :7069089532.
MOTI KHAVADI
453.
ATUL MOTORS JAM LLP (AAU2-AAU-01), PLOT
NO.22 & 29, NEAR PADANA POLICE STATION,
JAMNAGAR-KHAMBHALIYA HIGHWAY, MOTI
KHAVDI, ZANKHAR, TA: LALPUR, DIST -
JAMNAGAR, GUJARAT. - 361140
PH :9574004709 / 9574004743.
MUNDRA
454.
B M AUTOLINK (7702-AJ-02), PRAGPAR
ROAD,MUNDRA,DISTRICT-KUTCH, GUJARAT, -
370421
PH :9687632631, 9978940978.
NADIAD
455.
AMAR CARS PVT. LTD. (F702-P7-02), NEAR
RAJHANS MULTIPLEX,NADIAD-UTTARSANDA
ROAD - 387370
PH :9909960761.
NAKHATARANA
456. | What is the contact number for Perfect Auto Services in Morbi? | The contact number for Perfect Auto Services in Morbi is 9099058044, 9925199569, 9879499088. | 1,030 |
9-8
55TH0-74E
INSPECTION AND MAINTENANCE
Changing Engine Oil and Filter
Drain the engine oil while the engine is still
warm.
(1)
(1)
(2)
(1)
2) Remove the oil filler cap.
68PH00704
55T090170
3) Remove the screws (1), and then
remove the engine under cover (2).
4) Place a drain pan under the drain plug.
5) Using a wrench, remove the drain plug
and drain the engine oil.
CAUTION
The engine oil temperature may be
high enough to burn your fingers
when the drain plug is loosened. Wait
until the drain plug is cool enough to
touch with your bare hands.
Tightening torque for drain plug:
35 Nm (3.6 kg-m, 25.8 lb-ft)
9-9
WARNING | What precautions should be taken when removing the drain plug during the engine oil change? | The precautions that should be taken when removing the drain plug during the engine oil change are to wait until the drain plug is cool enough to touch with bare hands, as the engine oil temperature may be high enough to burn fingers. | 711 |
RANIWARA
1940.
SHRI KRISHNA AUTOMOBILES (SGX1-SGX-01),
NEAR RAILWAY GATE, BHINMAL ROAD
,RANIWARA, TEHSIL – RANIWARA, DISTRICT –
JALORE, RAJASTHAN,PIN CODE: 343040 -
343040
PH :9928377669.
RATANGARH
1941.
AURIC MOTORS (A UNIT OF AUDI MOTORS PVT
LTD) (BHJ1-BHJ-01), PLOT NO. AREA F-186
INDUSTRIAL AREA, RATANGARH. - 331 022
PH :7412087301.
RAWATBHATA
1942.
BHATIA & COMPANY (A UNIT OF BHATIA
CORPORATION PVT. LTD.) (JQ01-JQ-01), NEAR
INDIAN OIL PETROL PUMP, KOTA ROAD,
RAWATBHATA , DIST. CHITTORGARH,
RAJASTHAN. - 323307
PH :9001027933.
RAWATSAR
1943.
AURIC MOTORS (A UNIT OF AUDI MOTORS PVT
LTD) (SDA1-SDA-01), CHAK 21-22,DWD,PLOT
NUMBER -10 & 11, RAWATSAR (RAJASTHAN). -
335524
PH :9166712222, 9413311745.
REENGUS
1944.
JAMMU MOTORS (SGL1-SGL-01), REENGUS
HIGHWAY , REENGUS DISTT. SIKAR -332404 -
332404
PH :9785030973.
RENWAL MANJHI
1945. | What is the contact number for Shri Krishna Automobiles in Raniwara? | The contact number for Shri Krishna Automobiles in Raniwara is 9928377669. | 1,310 |
UTHANGARAI
2189.
SRI AMMAN CARS INDIA PVT. LTD.
(CFY1-CFY-01), SURVEY NO. 104/1, 104/1B,
VILLAGE – THANDIYAPANNUR, UTHANGARAI,
KRISHNAGIRI. - 635304
PH :9715044600.
TIRUTHANI
UTHUKOTTAI
2179.
CARS INDIA PVT. LTD. (CIC1-CIC-01), NO. 9/13,
CHENNAI BY PASS ROAD, OLD CHENNAI ROAD,
DISTT. THIRUVALLUR, TIRUTHANI,TAMILNADU -
631209
PH :7358773860.
TIRUVANNAMALAI
2180.
SRI AMMAN CARS INDIA PVT LTD. (LX02-LX-01),
2A/2, SURVEY NO. 3676/3, ANNA SALAI,
TIRUVANNAMALAI-CHENNAI NH-101,
TIRUVANNAMALAI TOWN AND DIST.,
TAMILNADU - 602601
PH :7094471293.
2190.
KHIVRAJ MOTORS PVT LTD. (CUC1-CUC-01),
SURVEY NO. 442/1, NEHRU BAZZAR STREET,
UTHUKOTTAI, DIST.-THIRUVALLUR - 602 026
PH :7299635536.
VALLIYUR
2191.
AADHI CARS PVT. LTD. (BXQ1-BXQ-01), DOOR
NO. 314A/11-14, WITHIN VADAKU VALLIOOR,
REVENUE VILLAGE, VADAKKU VALLIOOR
PANCHAYAT, RADHAPURAM TALUK, VALLIOOR.
- 627002
PH :7373091462.
VANDAVASI
Dealer Workshop (AS ON 31.05.2023 )
2192. | What is the contact number for Sri Amman Cars India Pvt. Ltd. in Uthangarai? | The contact number for Sri Amman Cars India Pvt. Ltd. in Uthangarai is 9715044600. | 1,364 |
KATARIA AUTO (97NA-97-01), NEAR CROMA
OUTLET, RATHOD CHAMBERS, DAMAN
ROAD,CHALA VAPI - 396191
PH :9714799985.
HARYANA
AMBALA
EAKANSH WHEELS (18NA-18-01),
AMBALA-CHANDIGARH HIGHWAY ADJOINING
AAJ SAMAJ VILLAGE-SADDOPUR, AMBALA -
134003
PH :8395903111.
BHIWANI
64.
PASCO AUTOMOBILES (X3NA-X3-01), NEAR
HUNNAMAL PIAYU, ROHTAK ROAD, BHIWANI-
HARYANA-127021 - 127021
PH :9289192582.
FARIDABAD
65.
66.
67.
PASCO AUTOMOBILES (58NB-58-01), 14/4,
MATHURA ROAD, FARIDABAD, HARYANA -
121003
PH :9999790229.
BVA AUTO (58NC-58-01), 2J/53-54, NH-2, NIT
FARIDABAD, HARYANA - 121001
PH :9911259288.
VIPUL MOTORS (58NA-58-01), SUB DIVISION
NO-3, INDUSTRIAL PLOT NO. -34, N.I.T,
FARIDABAD HARYANA - 121001
PH :8562019252.
GURGAON
68.
69.
70.
JIND
71. | What is the contact number for Eakansh Wheels in Ambala? | The contact number for Eakansh Wheels in Ambala is 8395903111. | 909 |
1720.
LOVELY AUTOS (BJS1-BJS-01), SANT MARKET,
JANDIALA-BUNDALA ROAD, VILLAGE –
JANDIALA MANJKI, TEHSIL – NOORMAHAL,
DISTRICT – JALANDHAR, PUNJAB. - 144033
PH :7087439797.
1728.
MAPSKO AUTO INDIA PVT. LTD. (BIS2-BIS-01),
MOGA ROAD, NEAR GREEN DHABA OPPOSITE
FUN PLAZA, KOTKAPURA, DISTRICT –
FARIDKOT - 151204
PH :7347000518.
LALRU
1729.
AUTOPACE NETWORK PVT LTD (BRJ1-BRJ-01),
VILLAGE – LALRU, DERA BASSI, SAS NAGAR
MOHALI, PUNJAB. - 140501
PH :9815011669.
KAHNUWAN
LUDHIANA
1721.
PATHANKOT VEHICLEADES PVT. LTD.
(CGM1-CGM-01), KHASRA NO.606,
VPO-KAHNUWAN, THE. & DISTT. GURDASPUR. -
143528
PH :8288993301.
KALA SANGHIAN
1722.
MARWAHA AUTOS (SPL1-SPL-01), MAIN
CHOWK, KALA SANGHIAN, DISTRICT
KAPURTHALA, PUNJAB - 144623
PH :9779166004.
KAPURTHALA
1730.
1731.
1732.
1733. | What is the contact number for Lovely Autos in Jalandhar, Punjab? | The contact number for Lovely Autos in Jalandhar, Punjab is 7087439797. | 1,274 |
55TH0-74E
kept, ask a Maruti Suzuki authorized
workshop.
– You can turn off the message on the
information display in high tempera-
ture by changing the setting (customi-
zation). For details, refer to “Setting
Mode” in “INSTRUMENT CLUSTER”
section.
Activation of the head-up display
When you press the engine switch to ON
mode and the engine starts, the head-up
display will automatically appear and the
following information will be displayed as
necessary.
(1)
(2)
(3)
(4)
(5) (6)
55T050750
(1) Vehicle speed
(2) Standard display
(3) Gear position indicator (for Auto Gear
Shift vehicles) (if equipped)
(4) Clock
(5) Cruise indicator (if equipped)
OPERATING YOUR VEHICLE
(6) “SET” indicator (if equipped)
When you press the engine switch to ACC
or LOCK (OFF) mode, the head-up display
will be automatically stored.
(1) Down switch
(2) Up switch
(3) Brightness control switch
(4) HUD (Head-up display) switch | What information is displayed on the head-up display when the engine is in ON mode? | The information displayed on the head-up display when the engine is in ON mode includes the vehicle speed, standard display, gear position indicator (for Auto Gear Shift vehicles), clock, cruise indicator (if equipped), and "SET" indicator (if equipped). | 503 |
68
2237.
2238.
2239.
2240.
2241.
2242.
2243.
2244.
2245.
2246.
2247.
2248. | What do the numbers 68, 2237, 2238, 2239, 2240, 2241, 2242, 2243, 2244, 2245, 2246, 2247, and 2248 represent in the car manual guide? | The numbers 68, 2237, 2238, 2239, 2240, 2241, 2242, 2243, 2244, 2245, 2246, 2247, and 2248 represent the page numbers in the car manual guide. | 1,375 |
FOREWORD
This manual is an essential part of your
vehicle and should always be referred for
the vehicle by user/ owner and must be
passed on to new users/ owners when
resold or otherwise transferred to a new
owner or operator. Please read this man-
ual carefully before operating your new
MARUTI SUZUKI and review the manual
from time to time. It contains important
information on safety, operation and main-
tenance. You are invited to avail the three
Free Inspection Services as described in
the manual. Three free inspection coupons
are attached to this manual. Please show
this manual to your dealer workshop while
you take your MARUTI SUZUKI for any
Service.
To prolong the life of your vehicle and
reduce maintenance cost, the periodic
maintenance must be carried out accord-
ing
“PERIODIC MAINTENANCE
SCHEDULE” described in “INSPECTION
AND MAINTENANCE” section of this man- | What important information does the manual contain? | The manual contains important information on safety, operation, and maintenance of the vehicle. | 3 |
MANCHERIAL
2282.
ADARSHA AUTOMOTIVES PVT LTD
(N601-CM-03), BEHIND MAHINDRA TRACTORS
SHOWROOM,BELLAMPALLY ROAD,
MANCHIRIAL , DISTT. ADILABAD - 504208
PH :8886302222.
MEDAK
2283.
VARUN MOTORS PVT. LTD. (KF01-KF-01),
SY.NO.:1486/A3, HYDERABAD ROAD, MEDAK
(MDL & TOWN) - 502110
PH :9154953337.
MEDCHAL
2284.
AUTOFIN LIMITED (CID1-CID-01), H. NO. 11-27/1,
SURVEY NO.401, MEDCHAL VILLAGE AND
MANDAL, DIST. - MEDCHAL. - 501401
PH :8885040020.
METAPALLY
2285.
ADARSHA (BJF1-BJF-01), SURVEY NO. 40/U/2
CHOULAMADHI, METPALLY PIN CODE 505325 -
505325
PH :8886092222.
MIRYALGUDA
2286.
PAVAN MOTORS PVT. LTD (WR01-WR-01),
SURVEY NO-940 &943, (OPPOSITE TO MINA
ENGINEERING COLLEGE) NARKETPALLY
ADDANKI BY-PASS ROAD,MIRYALAGUDA
,NALGONDA DISTRICT,ANDHRA PRADESH -
508207
PH :8790900399.
MOINABAD
2287. | Where is the location of Adarsha Automotives Pvt Ltd? | The location of Adarsha Automotives Pvt Ltd is behind the Mahindra Tractors showroom, Bellampally Road, Mancherial, Distt. Adilabad - 504208. | 1,385 |
5-50
55TH0-74E
OPERATING YOUR VEHICLE
Information message
Sound
Cause and remedy
Off
The engine restarted automatically because the following automatic engine
restart condition is met.
• When the vehicle coasts down a slope.
• The defroster is turned on.
52RM30670
5-51
55TH0-74E
ENG A-STOP System (Engine
Auto Stop Start System) (for
K10C engine) (if equipped)
The ENG A-STOP system (engine auto
stop start system) automatically stops the
engine while waiting briefly at a traffic light,
etc., and automatically restarts the engine
afterward. This system helps reduce emis-
sions, improve fuel consumption and lower
engine noise.
This system stops the engine temporarily
under specific conditions. Before parking
the vehicle for an extended period of time
or leaving the vehicle, properly apply the
parking brake and stop the engine with the
engine switch. | What is the purpose of the ENG A-STOP system in the vehicle? | The purpose of the ENG A-STOP system (engine auto stop start system) is to automatically stop the engine while waiting briefly at a traffic light or other similar situations, and then automatically restart the engine afterward. This system helps reduce emissions, improve fuel consumption, and lower engine noise. | 467 |
The light will come on and stay on if there
is a problem in the airbag system or the
seat belt pretensioner system.
WARNING
If the airbag warning light does not
blink or come on briefly when the
engine switch is pressed to change
the ignition mode to ON, stays on for
more than 6 seconds, or comes on
while driving, the airbag system or
the seat belt pretensioner system
may not work properly, which could
result in serious injury in the event of
a
systems
inspected by a Maruti Suzuki autho-
rized workshop.
crash. Have both
If this light comes on, refuel the fuel tank
as soon as possible.
When this light comes on, a ding sounds
once to remind you to refuel.
If you do not refuel, a ding sounds every
time when the ignition switch is turned
“ON” or pushed to “ON” mode. | What should you do if the airbag warning light stays on for more than 6 seconds or comes on while driving? | If the airbag warning light stays on for more than 6 seconds or comes on while driving, you should have both the airbag system and the seat belt pretensioner system inspected by a Maruti Suzuki authorized workshop. | 321 |
to
IMPORTANT
WARNING/
CAUTION/NOTICE/
NOTE
Please read this manual and follow its
instructions carefully. To emphasize spe-
cial information, the symbol and the words
WARNING, CAUTION, NOTICE and
NOTE have special meanings. Pay partic-
ular attention to messages highlighted by
these signal words:
WARNING
Indicates a potential hazard that
could result
in death or serious
injury.
CAUTION
Indicates a potential hazard that
could result in minor or moderate
injury.
NOTICE
Indicates a potential hazard that
could result in vehicle damage.
NOTE:
Indicates special
to make
maintenance easier or instructions clearer.
information
MODIFICATION WARNING
WARNING
Do not modify your vehicle. Modifica-
tion could adversely affect safety,
handling, performance, or durability
and may violate governmental regula-
tions. In addition, damage or perfor-
mance problems
from
modification shall not be covered
under warranty. | What does the symbol and the words "WARNING," "CAUTION," "NOTICE," and "NOTE" indicate in the manual? | The symbol and the words "WARNING," "CAUTION," "NOTICE," and "NOTE" in the manual indicate special information and potential hazards that the reader should pay attention to. | 5 |
GEM MOTORS (10NH-10-01), D.NO.8-96,
SURVEY NO.128/2 & 129, TYAGARAYANANAGAR
COLONY, KOTHAPET, HYDERABAD,
TELANGANA. - 500084
PH :9912345899.
JAYABHERI AUTO (10ND-10-01), HNO 2-40/64,
SURVEY NO 23 TO 28, JUBILEE GARDENS,
KOTHAGUDA, HYDERABAD,
TELANGANA-500032. - 500032
PH :9849103917,
9437061030.
VARUN MOTORS (10NB-10-02), H.NO.
8-2-120/117/A/2. PLOT NO. 83,83A,83B, ROAD
NO. 2, BESIDES SBI BANK, BANJARA HILLS,
HYDERABAD - TELANGANA - 500033
PH :9885610555.
SAI SERVICE (10NC-10-01), SURVEY NO 78,
ADJACENT TO HP PETROL PUMP,
GOPANAPALLY, GACHIBOWLI, HYDERABAD
-500046. - 500046
PH :9966377888.
RKS (10NI-10-01), SY NO:42, PET
BASHEERABAD, QUTHBULLAPUR, MEDCHAL
MANDAL, HYDERABAD - 500014
PH :9542234567.
ADARSHA AUTOMOTIVE (10NG-10-01), PLOT NO
6/P, 54, SURVEY NO. 204, PRAGATI NAGAR,
BALANAGAR, KUKATPALLY, HYDERABAD -
500072
PH :9154854949
8897972200.
ADARSHA AUTOMOTIVE, SHAMSHABAD
(10NG-`10-02), SHAMSHABAD, NH44,
HYDERABAD, TELANGANA – 501218 - 501218
PH :8297116633. | What is the contact number for Varun Motors in Hyderabad? | The contact number for Varun Motors in Hyderabad is 9885610555. | 936 |
PH :9873851333.
MAGIC AUTO PVT. LTD. (08B7-08-01), PLOT NO.
68/3,MOTINAGAR,NEW DELHI, - 110015
PH :43777777, 43777721.
SHREYASH AUTOMOTIVES PRIVATE LIMITED
(08F8-08-01), PLOT NO.9, SSI INDUSTRIAL
ESTATE, GT KARNAL ROAD, NEW DELHI. -
110063
PH :43288888.
SAYA AUTOMOBILES (0808-08-2B), KHASRA
NO.2,G.T. KARNAL ROAD,OPP. GURUDUARA
HARGOVIND SINGH,SIRAS PUR BADLI,DELHI -
110033
PH :27731325, 27731856.
COMPETENT AUTOMOBILES CO. LTD.
(0806-08-05), B-83 MAYAPURI PHASE I, NEW
DELHI - 110015
PH :47268980.
BAGGA LINK MOTORS PVT LTD. (0811-08-03),
PLOT NO.4,6,8,10 NEAR FORTIS HOSPITAL,
OPPOSITE NIRULAS, BABA POTERY
COMPOUND, ARUNA ASAF ALI ROAD, VASANT
KUNJ, NEW DELHI - 110070
PH :45688888, 45688811.
RANA MOTORS PVT LTD (08A1-08-04), B-6/6,
OKHLA INDUSTRIAL AREA PHASE-II, NEW
DELHI - 110020
PH :40877777, 26389930. | What is the contact number for SAYA AUTOMOBILES? | The contact number for SAYA AUTOMOBILES is 27731325, 27731856. | 999 |
74TB09009
55TH0-74E
INSPECTION AND MAINTENANCE
NOTICE
When tightening the plug, apply the
following sealing compound or
equivalent to the plug threads to pre-
vent oil leakage.
MARUTI SUZUKI Bond No. “1217G”
Gear Oil Change
Since special procedures, materials and
tools are required, ask a Maruti Suzuki
authorized workshop for this job.
Gear Oil
Manual Transmission Oil / Auto
Gear Shift oil
When adding gear oil, use gear oil with the
appropriate viscosity and grade as shown
in the chart below.
We highly recommend you use:
“MARUTI GENUINE GEAR OIL 75W” for
manual transmission oil / auto gear shift
oil.
Manual transmission oil / Auto Gear
Shift oil
1. Oil filler and level plug
(For K12N model)
2. Oil filler and level plug
(For K10C(DITC) model)
To check the gear oil level, use the fol-
lowing procedure:
1) Park the vehicle on a level surface with
the parking brake applied. Then, stop
the engine. | What should be applied to the plug threads to prevent oil leakage when tightening the plug? | To prevent oil leakage when tightening the plug, the Maruti Suzuki Bond No. "1217G" sealing compound or an equivalent should be applied to the plug threads. | 721 |
*1
–
When stopping or
backing up the vehi-
cle
1-17
The steering wheel lock has not been released. With load not
applied, turn the steering wheel to the left or right so as to
press the engine switch again.
Rear parking sensors detect an obstacle on the rear side of
the vehicle. Check the surrounding area directly with your
eyes and the mirrors, and back up the vehicle slowly.
55TH0-74E
When
Warning buzzer
Instrument cluster
Cause and remedy
QUICK GUIDE
When
switch
mode
the engine
in ON
is
Interior buzzer
• Chime (once)
Interior buzzer
• Chime (once)
When driving
Interior buzzer
• Beeping at short inter-
vals for approx. 95 sec-
onds
Interior buzzer
• 3 beeps repeating at
short intervals
When driving
Interior buzzer
• Chime (once)
Lights up
Lights up
Blinks
*1
Lights up
*1
Lights up
*1
The brake fluid is insufficient or the brake system may be
faulty. Consult with a Maruti Suzuki authorized workshop. | What should you do if the steering wheel lock has not been released when stopping or backing up the vehicle? | To release the steering wheel lock when stopping or backing up the vehicle, you should turn the steering wheel to the left or right so as to press the engine switch again. | 39 |
OPERATING YOUR VEHICLE
(4)
(1)
55TB5029
3) After the opening image is finished,
press a camera switch (1).
(2)
74TB05034
4) 3D view mode image will be displayed.
Press the button (3) for the setting.
74TB05014
5) Touch the indication (4) to perform the
setting of the 360 view camera. Change
to your preference. To
the setting
or
switch to the different page, press
.
5-94
55TH0-74E
OPERATING YOUR VEHICLE
• The image in the above figure is a typical example; it depends on the vehicle type.
Indication
Function
Guideline display
Guideline display
You can select one of the following guide lines:
• Hiding guide lines
• Displaying rudder-interlocked guide lines
• Displaying fixed guide lines
Front view default screen
Front view default screen
Rear view default screen
Rear view default screen
Opening display
Opening display
Front screen automatic display
Front screen automatic display
5-95 | What are the different options for guide lines that can be selected in the 360 view camera setting? | The different options for guide lines that can be selected in the 360 view camera setting are hiding guide lines, displaying rudder-interlocked guide lines, and displaying fixed guide lines. | 542 |
55TB308
ON
INT
OFF
Normal operation
Intermittent operation
Off
NOTICE
Clear ice or snow from the rear win-
dow and rear wiper blade before
using the rear wiper. Accumulated
ice or snow could prevent the wiper
blade from moving, causing damage
to the wiper motor.
55TB309
• If you twist the lever (2) in the direction
of and align it to
(washer) position
above “ON” position, the rear window
washer fluid will be sprayed and the rear
wiper will operate simultaneously. If you
release your hand from the lever, it will
return to “ON” position.
• If you twist the lever (2) in the direction
of and align it to
(washer) position
below “OFF” position, the rear window
washer fluid will be sprayed and the rear
wiper will operate simultaneously. If
you release your hand from the lever, it
will return to “OFF” position.
3-28
55TH0-74E
BEFORE DRIVING
Horn
Heated Rear Window Switch
(1)
55T030300 | What should you do before using the rear wiper? | Before using the rear wiper, you should clear any ice or snow from the rear window and rear wiper blade to prevent damage to the wiper motor. | 242 |
65J106
WARNING
SRS airbag system is not a substitute
for seat belts. SRS airbag system is
the supplemental restraint system
and will provide the effectiveness by
using the seat belts at the same time.
If you and the passengers do not fas-
ten their seat belts, it may result in
severe injury in a sudden braking or
a collision.
Even when you drive the vehicle
equipped with SRS airbag system,
make sure to fasten seat belt.
80J014
There is a possibility of major impact from
the front airbags when the airbags activate
and deploy instantaneously, the driver and
the passenger should sit deeply into their
seats and touch their backs lightly to the
seatback. In addition, the seat should be
positioned so that it is not too far forward.
59RN02190
2-38
55TH0-74E
FOR SAFE DRIVING
WARNING
For Proper SRS Airbag System
Operation | What is the purpose of the SRS airbag system in a vehicle? | The purpose of the SRS airbag system in a vehicle is to provide supplemental restraint in the event of a sudden braking or collision, working in conjunction with seat belts to minimize the risk of severe injury to the driver and passengers. | 136 |
THODUPUZHA
1150.
INDUS MOTOR COMPANY PRIVATE LIMITED
(7E01-HZ-04), PALA ROAD, THODUPUZHA -
685584
PH :9745998631.
1151.
POPULAR VEHICLES & SERVICES LTD.
(HZ02-HZ-01), SY.NO.124/7A-1, 124/7A-2,
THODUPUZHA EHLOOR MAIN ROAD, VILLAGE &
TOWN, THODUPUZHA, DISTT. IDUKI - 685585
PH :9072530120.
THRISSUR
1152.
1153.
1154.
1155.
1156.
POPULAR VEHICLES & SERVICES LTD.
(2701-A4-05), KUNNATHUMKARA,
PARAVATTANI, THRISSUR, KERALA - 680655
PH :6282306495.
SAI SERVICE PRIVATE LIMITED (2705-A4-06),
17/30,POOTHOLE,THRISSUR,KERALA - 680004
PH :9645105051.
BRD CAR WORLD LIMITED (A404-A4-01), NH
47,BYE PASS,KONIKARRA POST,THALORE,
THRISSUR - 680031
PH :9995807141.
INDUS MOTOR COMPANY PRIVATE LIMITED
(2702-A4-0D), JYOTHI COMPLEX, GURUVAYOOR
ROAD, WEST FORT, THRISSUR - 680004
PH :9745998014.
BRD CAR WORLD LIMITED (A404-A4-07),
GURUVAYOOR ROAD, PUNKUNNAM P.O.,
PUZHAKKAL, THRISSUR - 680002
PH :9746476529.
THRITHALLUR
1157. | What is the contact number for Popular Vehicles & Services Ltd. in Thodupuzha? | The contact number for Popular Vehicles & Services Ltd. in Thodupuzha is 9072530120. | 1,164 |
removal.
2) Tighten the bracket bolt and battery
cables securely.
WARNING
Batteries contain toxic substances
including sulfuric acid and lead. They
could have potential negative conse-
quences for the environment and
human health. Used batteries must
be disposed of or recycled according
to applicable rules or regulations and
must not be disposed of with ordi-
nary household trash. Make sure not
to tip over the battery when you
remove it from the vehicle. Other-
wise, sulfuric acid could run out and
you might get injury.
9-23
55TH0-74E
(Battery label)
NOTICE
After stopping the engine, controller
and system are operated for a while.
Therefore, before removing the bat-
tery, wait for more than one minute
after turning the ignition switch to
“OFF” or changing the ignition mode
to “LOCK” (OFF).
(5)
(6)
Pb
(5) Crossed-out wheeled bin symbol
(6) Chemical symbol of “Pb”
51KM042 | What precautions should be taken when removing a battery from a vehicle? | When removing a battery from a vehicle, it is important to take the following precautions:
1) Tighten the bracket bolt and battery cables securely.
2) Make sure not to tip over the battery to prevent sulfuric acid from running out and causing injury.
3) Wait for more than one minute after turning the ignition switch to "OFF" or changing the ignition mode to "LOCK" before removing the battery.
4) Dispose of or recycle used batteries according to applicable rules or regulations and do not dispose of them with ordinary household trash. | 743 |
Left side socket (1)
The standard capacity is 5 V / 2.4 A (12 W)
for one socket and USB Type-A can be
used.
Right side socket (2)
The standard capacity is 5 V / 3.0 A (15 W)
for one socket and USB Type-C can be
used.
(2)
(1)
Open the cover to use the USB charging
socket.
55T070390
WARNING
When the USB charging socket is not
in use, close the cover. If any foreign
material enters the USB charging
socket, it may cause a malfunction or
short circuit.
NOTICE
Do not charge your mobile device for
a long period of time, while the
engine is stopped. Otherwise, the
lead-acid battery may run out.
NOTE:
• The USB charging socket should be
used only for charging.
• For some models, charging may pause.
However, this is not a malfunction.
the
• Depending on the vehicle conditions
following examples, | What is the standard capacity for the left side socket? | The standard capacity for the left side socket is 5 V / 2.4 A (12 W). | 650 |
BAWAL
Dealer Workshop (AS ON 31.05.2023 )
558.
DINCO 4 WHEELS LLP (AUTO VIBES)
(BBD2-BBD-01), KHATA NO. 326 AND KHATAUNI
NO. 362, OPPOSITE PRATHAM HOUSING, NH-8,
BAWAL, DISTRICT – REWARI, HARYANA . -
123501
PH :7082100250.
BHIWANI
559.
JAGMOHAN MOTORS PVT LTD (X301-X3-01),
DELHI ROHTAK ROAD, NEAR RADHA SWAMI
SATSANG MANDIR, BHIWANI - 127021
PH :8685005592.
BILASPUR
560.
PANDIT AUTOMOBILES PVT. LTD.
(BGH1-BGH-01), NEAR GRAMIN BANK,
JAGADHRI ROAD, BILASPUR, DISTRICT –
YAMUNANAGAR, HARYANA. - 135102
PH :9992113854.
BILASPUR (HARYANA)
561.
PLATINUM MOTOCORP LLP (2L04-CIA-02),
KHASRA NO.54/67, CHOUDHARY NIHAL SINGH
MARKET, BILASPUR CHOWK, NH-8, BILASPUR,
DISTRICT – GURUGRAM. - 122413
PH :9953345329/9953345403.
CHARKHI DADRI
562.
JAGMOHAN MOTORS PVT LTD (X301-CT-02),
BHIWANI LOHARU ROAD, CHARKHI DADRI,
BHIWANI - 127306
PH :8059900538.
CHEEKA
563.
EAKANSH MOTORS PVT. LTD. (U802-HU-04),
MARBLE MARKET, PATIALA ROAD, CHEEKA,
HARYANA, - 136034
PH :8053086000. | What is the contact number for Platinum Motocorp LLP in Bilaspur? | The contact number for Platinum Motocorp LLP in Bilaspur is 9953345329/9953345403. | 1,050 |
ERODE
2062.
2063.
SREE SARADHAMBAL AUTOMOBILES PVT LTD
(H701-H7-01), 23/1, PERUND, URAI ROAD,
ERODE, - 638011
PH :9677987777.
SREE SARADHAMBAL AUTOMOBILES PVT LTD
(H701-H7-06), SURVEY NO. 1363/3, 1363/5,
1363/6, BEHIND MANIKAVASAKAR COLONY BUS
STOP, OPPOSITE TO CANARA BANK, KARUR
BYPASS ROAD, SOLAR, ERODE. - 638 002
PH :6385805777.
Dealer Workshop (AS ON 31.05.2023 )
2064.
2065.
SRI CITY AUTO (A UNIT OF CITY AUTO PVT
LTD) (H702-H7-01), OLD G.S. NO. 337 (1 TO 4),
RS NO. 259/11A,10,9,8,, SATHY ROAD, PERIYA
SEMUR VILLAGE, ERODE,TAMILNADU - 638003
PH :9171791991.
SRICITY AUTO (H702-H7-02), R.S. NO:1098/3,
VINAYAGAR KOVIL STREET, TELEPHONE
NAGAR, POONDURAI MAIN ROAD, ,ERODE,
TAMILNADU - 638002
PH :9626671444.
2073.
2074. | What are the contact details for Sree Saradhambal Automobiles Pvt Ltd in Erode? | The contact details for Sree Saradhambal Automobiles Pvt Ltd in Erode are as follows:
- Address: (H701-H7-01), 23/1, Perund, Urai Road, Erode, - 638011
- Phone Number: 9677987777 | 1,339 |
• If you would like to suddenly apply
brake, just push the brake pedal down
firmly without pumping. Otherwise, the
longer braking distance will be required.
• The ABS will not work if vehicle speed is
under about 9 km/h. This depends on
the road conditions.
Vibration and Sound during ABS
Operation
When strongly depressing the brake
pedal, you might feel vibration of the brake
pedal, the steering wheel, and the vehicle
body. This is due to ABS operation, and
does not indicate a malfunction; continue
strongly depressing the brake pedal at this
time.
NOTE:
Immediately after starting the engine and
beginning to drive, you might temporarily
hear a motor sound. This means that the
systems are in self-check mode. This
sound does not indicate a malfunction. | What should you do if you need to suddenly apply the brakes? | If you need to suddenly apply the brakes, you should push the brake pedal down firmly without pumping. | 581 |
POPULAR WHEELERS (INDIA) PVT. LTD.
(0111-01-01), BESIDE SOLA ROAD BRIDGE,S. G.
HIGHWAY SOLA,AHMEDABAD - 380054
PH :65058111.
KIRAN MOTORS LTD (0112-01-01), SURVEY NO.
82/1/1, NEAR H.P. PETROL PUMP, MOTERA
ROAD, CHANDKHEDA, AHMEDABAD - 380005
PH :8347491800/9824023122.
UDAY AUTOLINK PVT. LTD. (0113-01-01), NEAR
GALAXY SPACIA, OPP. DASTAN FARM, S. P.
RING ROAD, KATHWADA, AHMEDABAD,
GUJARAT - 382430
PH :7567229999.
NANDA AUTOMOBILES PVT. LTD. (0114-01-01),
SURVEY NO. 229/3, OPP. GOKULESH PETROL
PUMP, NAROL - ASLALI ROAD, NAROL,
AHMEDABAD, GUJARAT. - 382405
PH :8866558787 / 8460088883.
STARLINE CARS (AHMEDABAD) PVT LTD
(0115-01-01), PLOT NO. 103/2, NANDA CHILODA,
NEAR RAILWAY CROSSING, KRISHNANAGAR
ROAD, NARODA, AHMEDABAD - 382330
PH :9824601729.
KIRAN MOTORS LTD (0112-01-02), FINAL PLOT
NO.33/1/1, NEAR SHRUSHTI LAVISH, OPP.
SHYAM VILLA-II, NARODA-NIKOL ROAD, NIKOL
DISTT. AHMEDABAD - 382330
PH
:7069868374/9173840458/7383651643/9173044104
. | What is the contact number for Uday Autolink Pvt. Ltd.? | The contact number for Uday Autolink Pvt. Ltd. is 7567229999. | 1,010 |
KALLAMBALAM
1030.
POPULAR (QZ02-QZ-01), BUILDING NO. 5/472,
NH-47, KADUVAPALLY, THOTTAKAD P.O,
KALLAMBALAM, TRIVANDRUM DIST., KERALA -
695605
PH :8086078788.
KALPETA
1031.
1032.
INDUS MOTOR COMPANY PRIVATE LIMITED
(4701-JE-0C), MEENANGADI, KAKKAVAYAL P.O.,
NORTH KALPETTA,WAYAND - 673591
PH :9745998592.
KVR (JE02-JE-C1), BUILDING NOS. 363, 364, 365,
366,367,368 AND 369 CONSTRUCTED ON THE
PLOT COMPRISED IN RESURVEY NOS. 719/6,
722/3, 722/22, 722/6, 722/8, 722/10, 722/21,
SITUATED AT MUTTIL NORTH VILLAGE,
VYTHIRI TALUK, KALPETTA SUB-DISTRICT,
WAYANAD DISTRICT, KERALA. - 673 122
PH :9747021902.
KANHAGAD
1033.
KVR CARS (3L01-K2-02), ARANGADI, P.O.
KANHANGAD, DIST. KASARGOD, - 671315
PH :9605040999.
1036.
1037. | What is the contact number for the Kallambalam branch? | The contact number for the Kallambalam branch is 8086078788. | 1,141 |
THUCKALAY
2168.
ATHENS (BWQ2-BWQ-01), DOOR NO. 5/76B, (RE
SURVEY NO-530/7) THIRUVITHANCODE ROAD,
KERALAPURAM, MUTHALAKURICHI, VILLAGE –
MUTHALAKURUCHI, KALKULAM-TALUK,
THUCKALAY, DISCTRICT – KANYAKUMARI,
TAMILNADU - 629174
PH :8012029888.
THURAIYUR
2169.
PLA MOTORS (CSE1-CSE-01), D.NO.:5/300,
SINGALANDHAPURAM VILLAGE, THURAIYUR
DISTT. TRICHY (TAMIL NADU) - 621010
PH :9486763725.
TIRUCHENDUR
2170.
ASIR AUTOMOBILES PVT LTD (CCJ1-CCJ-01),
SURVEY NO. 220/1D1A, 221/3, 221/4, 221/5,
221/5A, 221/5B, PODHIGAI NAGAR,
VILLAGE-VEERAPANDIYAPATINAM,
THIRUCHENDUR, TUTUCORIN. - 628215
PH :7373900220.
TIRUCHENGODE
TONDI
2181.
SIVA AUTOMOTIVES (SHW1-SHW-01), SURVEY
NO: 85/16, WARD 10/78, SOUTH THOPU
STREET, ECR MAIN ROAD, ECR, THONDI,
RAMANATHAPURAM DISTRICT, TAMIL NADU -
623409
PH :7402788820.
TRICHY
2182.
2183.
2184.
2185.
2186. | What is the contact number for ASIR AUTOMOBILES PVT LTD in Tiruchendur? | The contact number for ASIR AUTOMOBILES PVT LTD in Tiruchendur is 7373900220. | 1,362 |
Shift into “N” (Neutral). Hold the clutch
pedal and brake pedal fully depressed.
55TH0-74E
Auto Gear Shift vehicles:
Shift into “N” (Neutral) and depress the
brake pedal. Hold the brake pedal while
starting the engine.
Automatic Transmission:
Check that the gearshift lever is in “P”
(Park) position and keep depressing
the brake pedal fully.
4) The “PUSH START SWITCH” message
will appear in the information display in
the instrument cluster.
(1)(1)
82K254
5) With your foot taken off the accelerator
pedal, push the engine switch (1).
When the engine is started, the starter
motor will automatically stop.
• Even if you fail to start the engine,
the starter motor will stop turning
automatically after approximately 12
seconds. In this case, press the
engine switch to select LOCK (OFF)
mode and restart the engine.
• | What should you do before starting the engine in an auto gear shift vehicle? | Before starting the engine in an auto gear shift vehicle, you should shift into "N" (Neutral) and depress the brake pedal. Hold the brake pedal while starting the engine. | 376 |
52RM21270
Blinks
55T040020
(#1) This message will disappear for a while even if the problem that caused the message to appear is not corrected.
4-37
55TH0-74E
Warning and indicator
message
Master warning
indicator light
Off
Off
Sound
Cause and remedy
The remote controller battery is about to
become flat. Replace the battery. (#1)
INSTRUMENT CLUSTER
Manual Transmission
Off
Off
55T040110
is pressed without
The engine switch
depressing the brake and clutch pedals. Try
again as instructed by the message.
52RM21300
(#1) This message will disappear for a while even if the problem that caused the message to appear is not corrected.
4-38
55TH0-74E
INSTRUMENT CLUSTER
Warning and indicator
message
Master warning
indicator light
Automatic transmission
Off
Off
Sound
Cause and remedy
The engine switch is pressed with the gear-
shift lever in a position other than “P” or “N”
and depressing the brake pedal. Try again
as instructed by message. | What does it mean when the master warning indicator light is off? | When the master warning indicator light is off, it means that there are no current warning or indicator messages displayed on the instrument cluster. | 314 |
• Engine coolant temperature is in normal
condition.
• ISG inside temperature is in normal con-
dition.
NOTE:
• The engine power assist function may
not work depending on vehicle condi-
tions.
• The engine power assist function may
not work while the battery capacity is
being checked right after the engine
start, and so on.
• The subjective feeling of the horn sound,
head lamp illumination and A/C blower
speed is likely to be different during vehi-
cle take off, deceleration energy regen-
eration function and engine power assist
function operation.
Starter Motor Function
Lithium-ion Battery Indication
(1)(1)
55TB5010
The segments in the lithium-ion battery
indicator (1) give an approximate indication
of the charge of the lithium-ion battery. The
number of segments that appear in the
indication increases or decreases with the
charge of the lithium-ion battery. | What does the number of segments in the lithium-ion battery indicator indicate? | The number of segments in the lithium-ion battery indicator indicates the charge level of the battery. | 442 |
• If the brake system warning light
comes on at any time during vehi-
cle operation.
NOTE:
Because the brake system is self-adjust-
ing, the fluid level will drop as the brake
pads become worn. Replenishing
the
brake fluid reservoir is considered normal
periodic maintenance.
NOTE:
(Parking Brake Reminder Buzzer)
A buzzer sounds intermittently to remind
you to release the parking brake if you
start the vehicle without releasing the park-
ing brake. Make sure that the parking
brake is fully released and the brake sys-
tem warning light turns off.
4-42
55TH0-74E
INSTRUMENT CLUSTER
Seat Belt Reminder Light
Airbag Warning Light
Low Fuel Warning Light
80J221
63J030
54G343 | What does it mean if the brake system warning light comes on during vehicle operation? | If the brake system warning light comes on during vehicle operation, it indicates a potential issue with the brake system that should be addressed immediately. | 319 |
BANSUR
1804.
FORTUNE CARS (A UNIT OF JYOTI
AUTOMOBILES PVT LTD) (BQP1-BQP-01),
KOTPUTLI ROAD, NEAR SUBHASH CHOWK,
BANSUR, RAJASTHAN - 301402
PH :8875005116.
BANSWARA
1805.
NAVNEET MOTORS (X903-X9-01), NEAR J.C.
MILL,OPPOSITE AKASHWANI,DAHOD
ROAD,BANSWARA - 327001
PH :86023 83260.
BARAN
1806.
BHATIA & COMPANY (A UNIT OF BHATIA
CORPORATION PVT. LTD.) (6101-PM-03),
BESIDE OJHA METAL, ATRU ROAD, BARAN -
325205
PH :9413379013.
BARMER
1807.
1808.
LMJ SERVICES LTD. (6502-SH-06), G-216, RIICO
INDUSTRIAL AREA, BARMER - 344001
PH :8005898360.
LMJ SERVICES LTD. (SH01-SH-01), NH# 68, OPP.
SADAR THANA - 344001
PH :8005898360.
BASSI
1809.
PREM MOTORS PVT. LTD. (VF02-VF-01),
MOHAN PURA BASSI, JAIPUR, RAJASTHAN -
303301
PH :01414711118,8058794151.
BAYTU
1810.
LMJ SERVICES (SIT1-SIT-01), NH-8 ,NEAR
JAGDAMBA PETROL PUMP , BAYTU - 344034
PH :8094011126.
BEAWAR
1811. | What is the contact number for LMJ Services Ltd. in Barmer? | The contact number for LMJ Services Ltd. in Barmer is 8005898360. | 1,287 |
For Rear Window Wiper
3) Slide the blade out as shown.
INSPECTION AND MAINTENANCE
NOTE:
Do not flex the wiper blade frame end more
than necessary. If you do, it can break off.
(1)
55TB0909
1) Hold the wiper arm away from the win-
dow.
2) Remove the wiper frame from the arm
as shown.
(1) Retainer
(1)
59RN09310
4) If the new blade is provided without the
two metal retainers, move them from
the old blade to the new one.
5) Install the new blade in the reverse
order of removal.
Make sure
the blade
retained by all the hooks.
is properly
6) Reinstall wiper frame to arm in the
reverse order of removal.
59RN09300
9-36
55TH0-74E
INSPECTION AND MAINTENANCE
Windshield Washer Fluid
NOTICE
• Damage may result if the washer
motor is operated with no fluid in
the washer tank.
• Avoid use of hard water to prevent
the
lime scale on
building of
vehicle.
68PM07022 | How do you remove and install a new rear window wiper blade? | To remove and install a new rear window wiper blade, follow these steps:
1) Hold the wiper arm away from the window.
2) Remove the wiper frame from the arm by sliding it out.
3) Slide the old blade out of the wiper frame.
4) If the new blade does not have metal retainers, transfer them from the old blade to the new one.
5) Install the new blade by inserting it into the wiper frame, making sure it is properly retained by all the hooks.
6) Reinstall the wiper frame onto the arm in the reverse order of removal. | 762 |
5-32
55TH0-74E
OPERATING YOUR VEHICLE
Starting off on an uphill/downhill
slope:
Uphill
1) Apply the parking brake firmly so that
the vehicle does not roll backwards.
2) Shift the gearshift lever to the “M” posi-
tion while depressing the brake pedal.
Make sure that the gear position indica-
tor in the instrumental cluster displays
1st gear.
3) Release the brake pedal and depress
the accelerator pedal gradually, and
when
to move,
release the parking brake and depress
the accelerator pedal to start off.
the vehicle starts | What steps should be taken when starting off on an uphill slope? | When starting off on an uphill slope, you should apply the parking brake firmly, shift the gearshift lever to the "M" position, release the brake pedal, depress the accelerator pedal gradually, and then release the parking brake to start the vehicle. | 424 |
part like a road sign.
– Low-profile objects such as curb-
stones.
– Sound-absorbing objects such
as cotton and snow.
NOTE:
• Thin poles or obstacles lower than the
sensors may become undetectable as
the vehicle moves closer to them even if
they have been detected from longer
distances.
55TH0-74E
• The system may calculate the distance
to a road sign or similar obstacle to be
shorter than the actual distance.
Obstacle Indication by Parking Sen-
sor
Instrument cluster (Type A)
(1) Obstacle detected by rear center sensors
(2) Obstacle detected by rear corner sensors
Upon detecting an obstacle, the parking sensor causes an interior buzzer to sound and a
symbol representing the obstacle appears on the information display in the instrument
cluster.
• A different symbol is displayed depending on the direction and distance of the obstacle.
• A buzzer located behind the rear seat sounds when a sensor at the rear detects an | What happens when the parking sensor detects an obstacle? | When the parking sensor detects an obstacle, it causes an interior buzzer to sound and a symbol representing the obstacle appears on the information display in the instrument cluster. | 553 |
Drive Slowly on a Slippery Road
Surface
Do not Drive on Puddles at High
Speed
72J20330
At a tunnel exit, on a bridge, or when a
large truck passes you, your vehicle might
be blown slightly sideways by side wind.
Do not panic. Firmly grasp the steering
wheel, gradually reduce speed, and regain
your intended course.
59RN06030
69RHS182
CAUTION
CAUTION
When driving on wet, icy, or snowy
roads, etc., refrain
from sudden
movements, such as sudden starting,
acceleration, braking,
turning or
abrupt engine braking. Otherwise,
there is the danger of an accident due
to loss of traction.
When driving on puddles or on wet
road surfaces at high speed, a thin
surface of water is built between the
wheels and the road surface, and the
wheels may float. This is called as
hydroplaning, which leads to a loss
of control in the steering wheel and
the brakes and possibly results in an
accident.
6-5
55TH0-74E | What should you do if your vehicle is blown slightly sideways by side wind? | If your vehicle is blown slightly sideways by side wind, you should firmly grasp the steering wheel, gradually reduce speed, and regain your intended course. | 594 |
2020.
2021.
2022.
2023.
2024.
2025.
2026.
2027.
2028.
2029.
2030. | What are the years listed in the context? | The years listed in the context are 2020, 2021, 2022, 2023, 2024, 2025, 2026, 2027, 2028, 2029, and 2030. | 1,328 |
JAMSHEDPUR
769.
770.
771.
PEBCO MOTORS LTD. (3101-31-01), MEDIUM
SECTOR, INDUSTRIAL AREA, ADITYAPUR,
JAMSHEDPUR - 831001
PH :9308433388.
PEBCO MOTORS LTD. (3101-31-02), 16
BALICHALA, CONTRACTORS & GODOWN AREA,
SONARI, JAMSHEDPUR - 831011
PH :9308433388.
MOTOR WORLD (3102-31-01), N.H-33, NEAR
PARDIH CHOWK, MANGO, JAMSHEDPUR -
831012
PH :9431347164, 9570168342.
JAMTARA
772.
RELIABLE INDUSTRIES (BOX1-BOX-01), PLOT
NO. 483, PARWAT BIHAR, DUMKA ROAD,
JAMTARA, JHARKHAND. - 815351
PH :9835814404.
KATRAS
773.
CAR ONE (A UNIT OF RAJHANS AUTOMOBILES
PRIVATE LIMITED) (GLP1-GLP-01), RAJHANS
REFRACTORIES, OPP. LIC OFFICE, RAJGANJ
ROAD, KATRAS, DISTT. DHANBAD,
JHARKHAND-828114 - 828114
PH :8910900556.
KHELARI
774.
SUDHA MOTORS(A UNIT OF SUDHA BUSINESS
ENTERPRISES PVT LTD) (CFO1-CFO-01), PLOT
113, MOUZA- BUKBUKA, BESIDE PAHADI
MANDIR, KHELARI, RANCHI - 829205
PH :6458222, 9534199997.
KHUNTI
775. | What is the contact number for PEBCO MOTORS LTD in Jamshedpur? | The contact number for PEBCO MOTORS LTD in Jamshedpur is 9308433388. | 1,088 |
CHENGAM
1997.
GANESH CARS PVT. LTD. (BUP1-BUP-01),
SURVEY NO. 293/3A, 3A1,VILLAGE -
THUKAPETTAI, CHENGAM, DIST.
-TIRUVANNAMALAI. - 606 701
PH :7397395289.
CHENNAI
1998.
1999.
2000.
2001.
2002.
2003.
2004.
2005. | What is the contact information for Ganesh Cars Pvt. Ltd. in Chengam? | The contact information for Ganesh Cars Pvt. Ltd. in Chengam is as follows:
Address: Survey No. 293/3A, 3A1, Village - Thukapettai, Chengam, Dist. - Tiruvannamalai, 606 701
Phone Number: 7397395289 | 1,321 |
73
Dealer Workshop (AS ON 31.05.2023 )
2474.
2475.
2476.
2477.
2478.
2479.
2480. | What is the purpose of the "Dealer Workshop" section in the car manual guide? | The "Dealer Workshop" section in the car manual guide provides information about the specific workshops or service centers authorized by the car manufacturer where owners can take their vehicles for maintenance and repairs. | 1,419 |
NOTE:
• Avoid covering the light sensor area of
the windshield with a sticker. The sticker
may impair the performance of the sen-
BEFORE DRIVING
With the headlights on, push the lever for-
ward to switch to the high beams (main
beams) and pull the lever toward you to
switch to the low beams. When the high
beams (main beams) are on, a light on the
instrument cluster will come on. To
momentarily activate the high beams (main
beams) as a passing signal, pull the lever
slightly toward you and release it when you
have completed the signal.
Auto-on headlight system
(if equipped)
sor and make the system unable to con-
trol operation of the lights correctly. | What should you avoid doing to the light sensor area of the windshield? | You should avoid covering the light sensor area of the windshield with a sticker. | 227 |