query
stringlengths 20
2.05k
| answer
stringlengths 75
2.05k
|
|---|---|
does this fit the z2x version? Thx | I am not 100% sure. It appears that it does based on the size of the torch housing. I have the 9p and it fits perfectly. Compare the two and see. Otherwise it is a great product and has lasted 2 years so far wearing every day on my duty belt. Gets lots of inquiries and compliments. |
does this fit the z2x version? Thx | Yes. The retention clip on this holster holds the bezel, the shape of the flashlight shaft is irrelevant. I would suggest getting a different holster however, since the retention clip is plastic and does not work very well. |
What material are these dumbbells made out of? | They say cast iron.. I don't know the exact chemical compound breakdown but they seem like cast. |
What material are these dumbbells made out of? | Here is the official CAP site that gives measurements and weight or you can contact them--http://www.capbarbell.com/Bars/1inch.html |
What is the length and width of this scooter in inches? | below are all the products specs- We are authorized dealers and offer fast shipping- Also 1 year warranty FREE Phillips Health care he EW-36 mobility scooter is a 3 wheel high-power mobility scooter using a transaxle brushless electric motor. At full power the EW-36 can reach speed up to 18 mph which makes it easily the fastest mobility scooter on the market! Up to 45 mile range per single charge! Also included a reverse switch, armrest and large storage basket. The EW-36 comes equipped with a digital anti-theft alarm and two rear shock absorbers on the frame. The EW-36 is a great scooter for both fun and transportation. COLOR: Red, Silver, Blue, Orange, Camo POWER: Electric WATTS: 500 Watt MOTOR TYPE: Transaxle differential brushless motor AMPS: 20 AH VOLTS: 48 Volt DIMENSIONS: 61"*29"*41" BATTERIES: 48 volt lead acid maintenance free battery TIRE SIZE: 16"/2.5" CHARGER: Smart charger included SPEED: Up to 18mph DISTANCE: Up to 45 miles per charge (distance varies by riders weight , terrain, road surface etc.) THROTTLE TYPE: Variable speed control- Twist Throttle KEY START: Yes BRAKING SYSTEM: Front and rear braking system DRIVE SYSTEM: Brushless motor HEAD LIGHT: Yes CARTON SIZE: Shipped on a pallet SHIPPING WEIGHT: 280 lbs NET WEIGHT: 200 lbs ELECTRIC LIGHT: Yes BATTERY INDICATOR: Yes STORAGE BASKET: Yes SHOCK ABSORBER: Two rear shock absorber on the frame ALARM: Anti-theft alarm |
how much bigger is the medium versus the baby gund spunky? | These are no longer at my house as they went home with my granddaughter, but the medium is significantly larger than the small. She was about one year old and she and I both liked the medium sized one the best |
how much bigger is the medium versus the baby gund spunky? | The medium spunky is about 2-3 times as large as the baby spunky. The medium size is a little big for a newborn but my kid started sleeping with his medium "dogbo" around 6mo old. He is 3 now, we are on the 3rd dog. They hold up really well, we just buy extras for daycare and grandmas house. He still has the original one! |
how much bigger is the medium versus the baby gund spunky? | We have the little one that rattles and this medium puppy is at least 4 to 5 times larger than that one. My kids are obsessed with these puppies and this is one of their faves. :) |
Does it work with t-mobile | Yes but it almost caught on fire charging in my daughters bed. I DONT RECOMMEND THIS PHONE!!!! |
Will it work with iPod Classic | Yes, it would have no problems with iPod classic. Only the newest generation iPods with a different connecter wouldn't work. All iPods 4th gen and older will work just fine. |
Will it work with iPod Classic | Not sure it will work but this is an awful product! Took me forever to get a replacement from the manufacturer when the speakers blew and the replacement had the same problem. We never even turned it up that loud. It is cute but do not buy this item! |
Will it work with iPod Classic | Yep! And it includes an aux cord to plug in for anything that's not adaptable to the hookup. |
i will buy a TaoTronics Car License Plate Frame Rear View Backup Camera, (170 Degree Wide Angle / Night Vision / Waterproof Metal Casing / Black) TT-CC17 " the link", Would like know monitor screen boss audio BV7280 is compatible? i will buy a TaoTronics Car License Plate Frame Rear View Backup Camera, (170 Degree Wide Angle / Night Vision / Waterproof Metal Casing /... » Read More i will buy a TaoTronics Car License Plate Frame Rear View Backup Camera, (170 Degree Wide Angle / Night Vision / Waterproof Metal Casing / Black) TT-CC17 " the link", Would like know monitor screen boss audio BV7280 is compatible? « Show Less | Hello. Yes, that aftermarket reverse camera will work with this Boss BV7280. |
is their a wall outlet option ? | Plugs into the wall. The clock part takes batterys. It works we found out who was stealing from us. |
is their a wall outlet option ? | Yes. It can be plug into the wall. This is a great product. Looks like a real clock |
is their a wall outlet option ? | The clock wasn't what I expected. I wouldn't recommend this clock. There is no sound and the quality of the picture quality is not that good. |
will item be guaranteed if I order through amazon/ | I just got off the phone with Maytronics and they indicated the DX3 is reserved for brick and mortar stores with "bigger overhead." She said if I purchased it online they warranty would not be honored. |
will item be guaranteed if I order through amazon/ | I don't think so , you take a change but I very satisfied with this purchase since 6 mouths and still work very good also the warranty you can get at store is only 1 years and you will pay 200.00 more for the same product ....hope I can help you |
will item be guaranteed if I order through amazon/ | Bought mine a few months ago. Love it. 1st one stopped working after the 1st use. Maytronics suggested I send it in, so, to answer your question, the warranty is good. Fortunately, for me, it was purchased less than a month earlier, so I was sent another from Amazon...like literally, 1 day later. New one works great. Ran it several times before the 1st month was up, just to make sure I did not get another lemon. No problem. Item is pretty heavy, so even in warranty, it will cost some $$ to send it in. |
Will this work with a iPad Mini? | No. The clamp that stretches to hold your phone will not stretch that far. But Joby does have a solution for you, involving one extra piece of gear to get the stand and the iPad together: http://joby.com/blog/2013/08/how-to-use-your-gorillapod-ipad-together/ |
I'm unable to find the MSAC-PC4 memory card on line. What other memory stick is compatible with this camera? | that's a good question. if you are having a hard time finding it you might have to contact Sony and ask them. I believe this is an old camera. they may or may not have the information. Best buy might have what you are looking for. then again it might a sony proprietary thing. it that is the case then it might not be cost effective to even look for it as it might be too expensive. good luck |
I'm unable to find the MSAC-PC4 memory card on line. What other memory stick is compatible with this camera? | I'm using a Sandisk Memory Stick Pro Duo with adapter. I think you can also use Memory Stick Pros (without the Duo in the name), as they will be the right size. |
How many pieces of bacon can fit around the rim? | Six to eight dependent on the cut of the bacon. We use thick sliced so 6 would be the most. It works beautifully in the microwave, we drape a paper towel over it and it does not splatter in the oven. The potter that makes them is in Joplin, MO. They are authentically made in the United States of America and signed by the potter. |
Are these sold AT David's Bridal (in the store) | To answer my own question, they are not sold at the store, only online. I went to David's Bridal near me to find out since nobody had responded. Hope this helps anyone else who was wondering. |
should I use 3/8" or 1/4" air hose for the Freeman PFL618BR floor nailer? | Doesen't matter. You just need the correct fitting for the ends of the hose. |
should I use 3/8" or 1/4" air hose for the Freeman PFL618BR floor nailer? | I would use a real flexible hose something from HD or Loews with a 1/4 in. Fitting that's all you need |
How big a transformer for 220V it needs? I cannot find info on power consumption (Amps or Watts) | My roomate knows all of specs. It's a solid machine though. It's noisy at times, but keep it on low while you have guests and/or watching TV. Auto while out of the house/apartment. |
With the door in place, can you still use the door to go in and out without completely removing it? | I can, because the cat door has a way of staying put, so it doesn't just fall out when you slide open a door. It has worked out well for me. I like the way you can control the in/out activity. I'd recommend the door. |
With the door in place, can you still use the door to go in and out without completely removing it? | Yes, the pet door locks in position. Your slider works as always. They provide a new locking mechanism for itb but I chose to just use a piece of PVC in the track to secure it. |
With the door in place, can you still use the door to go in and out without completely removing it? | I think it would depend on how you install it. If you have it so the springs loaded in the top hold it in place, then yes you can still use the door. Since it doesn't have a lock once installed, I generally leave a dowel in the track so the slider can't move and go in and out the other door. Also, this door came with no weather stripping, which other doors I've used have provided. So, you may have the concern of how to stop the air from passing between the two panels of the glass doors while the pet door is installed. For what it's worth, the cats have mastered it and it's their go-to way to go from the kitchen to the lanai, I think it would depend on how you install it. If you have it so the springs loaded in the top hold it in place, then yes you can still use the door. Since it doesn't have a lock once installed, I generally leave a dowel in the track so the slider can't move and go in and out the other door. Also, this door came with no weather stripping, which other doors I've used have provided. So, you may have the concern of how to stop the air from passing between the two panels of the glass doors while the pet door is installed. For what it's worth, the cats have mastered it and it's their go-to way... » Read More I think it would depend on how you install it. If you have it so the springs loaded in the top hold it in place, then yes you can still use the door. Since it doesn't have a lock once installed, I generally leave a dowel in the track so the slider can't move and go in and out the other door. Also, this door came with no weather stripping, which other doors I've used have provided. So, you may have the concern of how to stop the air from passing between the two panels of the glass doors while the pet door is installed. For what it's worth, the cats have mastered it and it's their go-to way to go from the kitchen to the lanai, « Show Less |
doese this work in a epson cx8400 | It has been working fine for me. I have printed photos also. No issues. The color quality on paper is not as brilliant, but it is a small price to pay with the savings you get |
I am confused about this product: the description says this is for a 5 mt but the picture shows a 6 mt. Please advise | Sorry, just saw the original amazon website, not the amazon q&a; page. It's strange - the image in the amazon question is the correct 5MT knob, but the one on the amazon page is a 6MT. Suggest that you confirm with them. |
Does this work with the Philips 47PFL7422D/37/? | The list of brands it is compatible with includes Philips, so I would assume so. |
does it have a rain sensor? | No it doesn't Al. You can manually skip a day with the push of a button, but it doesn't do it automatically. |
what happens with my creator 2010 slide shows when I uninstall this version? | I've never used that function but if the files appear to be unique/proprietary, my best guess is that they'd be compatible with another version. Depending on your ultimate goal (stick with Roxio or not) it might be best to save the files, back-up the files, possibly explore conversion software options. |
what happens with my creator 2010 slide shows when I uninstall this version? | I had no problems with this issue. It would be a good idea to back up your files prior to installing. |
ccan thiis be used in brackish water? | Brackish water is part salt water and fresh water. Be certain to rinse the motor off after each use. Salt is extremely corrosive and will reduce the overall life of the motor over time. However, a fresh water rinse after using will extend it's life considerably, especially if you raise the motor head out of the water when the boat is not in use. |
How do you keep the liquid coffee from overflowing the adapter? No matter how firmly I press down on the lid of the basket, liquid still overflows. | Did not have that issue. The K-cups fit tightly into the adaptor fits tightly into the VUE, I can only guess that has something to do with your issue. |
How do you keep the liquid coffee from overflowing the adapter? No matter how firmly I press down on the lid of the basket, liquid still overflows. | I use K cups and the vue cups and have never had this problem. Sorry Are you pushing the Kcup clear down in the adapter so it is flush? |
How do you keep the liquid coffee from overflowing the adapter? No matter how firmly I press down on the lid of the basket, liquid still overflows. | Are you pressing the K cup down into the adapter cup so it gets punctured with the little pointy thing in bottom? Unless your adapter is defective & doesn't have it. I've not had any over flows! |
How do you keep the liquid coffee from overflowing the adapter? No matter how firmly I press down on the lid of the basket, liquid still overflows. | I don't know I never got to use the basket my keurig vue stopped working and keurig sent me a new 2.0 so I never used the basket only the kcup part |
Will it work with the iphone 5c | I can't say for sure. But check apples website. I think then 5c is a bit different dimensions. So I would not think it would fit. |
What type of gelatin is in these fish or bovine | According to the site: Our product currently contains porcine gelatin. As we are produced in an allergen free environment we can't use either beef (mad cow) or fish proteins to encapsulate. Currently, there is no technology to encapsulate fish oil in fruit pectin and without encapsulation they would be inedible. We will be producing a vegetarian and Kosher version of our product soon. If you would like to be added to our mailing list to hear about these new products first, please email us at [email protected]. |
Is this product good for puffiness under eyes | Don't about if it help puffy eyes. But it helps for dark circles around your eyes. |
Is this product good for puffiness under eyes | As some reviewers have said, the product has changed some and apparently used to be a little better. Most eye creams do something for under eye, as this one contains more natural ingredients it probably treats puffiness as well as dry skin. The cream is kind of sticky. This isn't too bad of an eye cream. I wouldn't say it did wonders, but it was ok for most eye problems. Might consider some of the other reviews, they were helpful and had some good information on the product. |
Any suggestions on where to buy sheets since LARGER TABLE? | I have no problem using standard twin sheets on it. I use the NRG flannel sheets available from Massage Warehouse or on here. |
does this laptop have a backlit keyboard? | no. it is a cheap laptop, it does not have backlight keyboard, most $400 + HP laptops does have it. |
Will this stereo fit a 2006 Toyota Camry LE? | Hi Daniel M.Dimensions:Approx. 178 mm × 50 mm × 177 mm(7 1/8 in × 2 in × 7 in) (w/h/d)Mounting dimensions:Approx. 182 mm × 53 mm × 160 mm(7 1/4 in × 2 1/8 in × 6 5/16 in) (w/h/d)Please check the slot in your car. Thanks. >joffrey |
Will surface rt fit inside of pouch, or is it too long? | The Surface is a little bit too long at 10.8". The storage pocket can fit devices 10" or shorter. |
what access including ? | This includes the stroller frame, stroller seat, underseat bag, and the rain shield with mosquito net. |
What is the distance between the arms? Can the arms be removed? | 17inches from one arm pad to other (inside measurement . We like our chair much nicer than bench type. Therapist recommended it to us saying she though it much safer and we really like the seat material |
What is the distance between the arms? Can the arms be removed? | The difference is how you place the arms on the chair.There suppose to face inward towards the seat for a better grip.The chair comes unassembled, so yes the arms are removable. |
would i need the support frame to set up the tent? | Yes, you will need a 10x10 staight leg or slant leg canopy depending on what model you choose. |
would i need the support frame to set up the tent? | Hello Tim. You will need to have a 10 x 10 frame which is sold separately. Keep in mind the tent is only a" bladder" which hooks to the frame of any 10 x 10. I have used the "ez up", "caravan" and currently using the "coleman" brand which has worked the best........Hope this helps.......... |
would i need the support frame to set up the tent? | Yes you needa 10x10 foot straight leg frame, with a canopy. The canopy becomes the roof of the tent and the frame supports the tent. |
would i need the support frame to set up the tent? | Yes!!!! You need to have a 10x10 with straight legs for this model- they have a model for slant leg 10x10's, so have a frame and know which one you have first before ordering |
Are the pillows washable? | I haven't, but I imagine you could. HOWEVER, these pillows very-quickly lose their 'fluff.' I can't imagine that they would hold up very well after a washing. |
Are the pillows washable? | I have washed these pillows a few times and for the most part they held up. I have had to sew one seam closed once. |
Looking to use it in the UK, is there any issues with power supply or voltage? | I charge my Looxcie device via the USB port on my computer. Have not used the power supply to charge the device. |
Looking to use it in the UK, is there any issues with power supply or voltage? | Mine recharges from the USB port. If is standard USB no problem. If you have an AC to USB converter, you're fine. |
how many amps is the motor? | Amps are not listed on materials received when I purchased the schredder. Baring that, it's the best damn schredder I ever owned. |
how many amps is the motor? | 5 Amps like the previous response indicated. I've had this shredder since 2007 and used it almost daily with no problems whatsoever. It's my understanding that this model has been discontinued (or upgraded to a new model), but in my opinion, this is the very best shredder I have ever owned. |
how many amps is the motor? | Hi Jeff, this is what is on the back of the shredder: Input 115 VAC, 5Amp, 60HZ hope this helps. I really like this shredder and have had no problems |
Mine kicks off at 200 degrees??? | Sounds like it may be the electric control unit may be defective (have a short in it) If still under warranty call Co and request new one--it is the temp control as the unit itself can tlerate heat--mine will go above 600 deg. Good Luck, Anne |
Mine kicks off at 200 degrees??? | Somethings wrong here. We have two of these grills and couldn't be happier. Try using a different plug in to get on a different circuit. |
Mine kicks off at 200 degrees??? | Mine gets real hot! Have to be very careful to calibrate each time....so don't know what to tell you. |
Mine kicks off at 200 degrees??? | If the breaker trips then the element is defective. The thermostat module may be bad. Masterbuilt customer service is pretty reasonable so give them a call. Also try a different outlet perhaps your ground is bad. Good luck! |
Is there a list of ingredients anywhere? | Ingredients are on bottle label. Starts with; aloe vera,sunflower oil,Palm oil.glycol.retinol.vit.E. etc etc. Jojoba oil.green tea.Shea butter. Vit.B5.etc. |
Is the entire rod made of metal, even the ball ends or are some pieces plastic? | They are both metal but there are plastic pieces to allow them to fit together. |
good morning, I want to know if the price of the gloves is the pair or single? | You get a pair. One right and one left glove. Because of my brown skin it blends in very well with me. |
Can I use these bags like wearing cross body? Or are they too small for that kind of usage? Thank you | I can comfortably sling it onto my shoulder but not across my body... Look at the two pictures that show a man and a woman using the bag, you can see exactly how long the strap is |
Can I use these bags like wearing cross body? Or are they too small for that kind of usage? Thank you | I couldn't, the handles are long for easy over the shoulder, but not long enough to be cross body on an adult.But that being said, 1) they have a little felt pad where they hit the shoulder, so they stay on shoulders well, and 2) it's easy to have as many as three full bags on the same shoulder without impeding shoulder movement. |
Can I use these bags like wearing cross body? Or are they too small for that kind of usage? Thank you | No, absolutely now. Not even with a small frame, maybe can for a three-year old. |
Can I use these bags like wearing cross body? Or are they too small for that kind of usage? Thank you | It would ride pretty high under your armpit but u could probably do it depending on your size. |
Can I use these bags like wearing cross body? Or are they too small for that kind of usage? Thank you | Not really. It's possible for someone with a very small frame, but the bag would be up underneath your armpit |
Can I use these bags like wearing cross body? Or are they too small for that kind of usage? Thank you | If you have a petite frame you could possibly use it as a cross body. The strap isn't short by any means, just not quite long enough for that. |
Will this handle 200 psi water pressure? | I know my home has higher than normal water pressure, and 3 out of 3 of these stopped working reliably for me after less than a dozen uses, so I think they can't hand anything higher than the typical pressure range of water mains. I wouldn't be surprised if 200 psi blew the thing up. |
Will this handle 200 psi water pressure? | I have three of these though my water pressure is low they have lived outside year round in zone 6A/B for years, even with a few days below zero that killed a lot of shrubs these guys still worked in the Spring.Only the paper label has been to fade after 5 years of use. |
Will this handle 200 psi water pressure? | The Dramm website does not provide any water pressure specifications for this or other Dramm products. But this is a simple plastic timer intended for typical residential use. A 200 psi water pressure seems like an extremely high pressure for any plastic device. I suspect that the internal shutoff valve might have difficulty with that kind of water pressure. At a minimum, that kind of pressure is likely to shorten the lifetime of the unit. You could contact Dramm via email ([email protected]) to see if they can provide a more reliable answer to your question. |
Will this handle 200 psi water pressure? | In general, the piece didn't last very long even with the typical home pressure, so I wouldn't chance it. |
Will this handle 200 psi water pressure? | IO do not know if it will handle 200 psi water pressure, because I have my own well and the water varies. What I have done is purchase an inexpensive on/off metal fitting with a toggle. I hook up the hose, then adjust the volume using the toggle switch. I use these in different places in the yard so by having an adjustable toggle switch attached, it allows me to use soaker hoses and regular hoses |
How do I assemble the shield | It's really easy if you assemble those parts with patience and carefulness. It's preferable to fix all the bar-shaped parts to one of the circle-shaped tenons firstly, then turn the half-composed shield upside down gently cuz the bar-shaped parts may drop down. Fix the rest bar-shaped parts into the other circle-shaped tenon. Then the shield is completed. It only takes me less than 10 minutes to complete this shield. With patience and carefulness, you can assemble it well too. Just be careful that don't let your pets(especially cats) or kids play the bar-shaped parts, it's quite fragile. It's really easy if you assemble those parts with patience and carefulness. It's preferable to fix all the bar-shaped parts to one of the circle-shaped tenons firstly, then turn the half-composed shield upside down gently cuz the bar-shaped parts may drop down. Fix the rest bar-shaped parts into the other circle-shaped tenon. Then the shield is completed. It only takes me less than 10 minutes to complete this shield. With patience and carefulness, you can assemble it well too. Just be careful that don't let your pets(especially cats) or kids play the bar-shaped parts, it's quite... » Read More It's really easy if you assemble those parts with patience and carefulness. It's preferable to fix all the bar-shaped parts to one of the circle-shaped tenons firstly, then turn the half-composed shield upside down gently cuz the bar-shaped parts may drop down. Fix the rest bar-shaped parts into the other circle-shaped tenon. Then the shield is completed. It only takes me less than 10 minutes to complete this shield. With patience and carefulness, you can assemble it well too. Just be careful that don't let your pets(especially cats) or kids play the bar-shaped parts, it's quite fragile. « Show Less |
How do I assemble the shield | No need for assembly. It's really cosmetic. Doesn't really server much purpose. |
what size is the motor for the 11 cup model cuisinart | Gosh I do not remember the size is.....But will tell you that it is powerful enough to do any job you may want to do..... My wife makes her own dog food, makes our own bread (yes she uses it to make bread) she uses our's most every day making something with no problem.... She has a Black and Decker that she used for years but it will not do half of what her new Cuisinart will do......She still uses her Black & Decker for some of the small stuff...... Kind of comical to watch her when she has the two (2) processors going...... Hope this answers your question.....Billy Edwards......3-19-15 at 10am Gosh I do not remember the size is.....But will tell you that it is powerful enough to do any job you may want to do..... My wife makes her own dog food, makes our own bread (yes she uses it to make bread) she uses our's most every day making something with no problem.... She has a Black and Decker that she used for years but it will not do half of what her new Cuisinart will do......She still uses her Black & Decker for some of the small stuff...... Kind of comical to watch her when she has the two (2) processors going...... Hope this answers your question.....Billy... » Read More Gosh I do not remember the size is.....But will tell you that it is powerful enough to do any job you may want to do..... My wife makes her own dog food, makes our own bread (yes she uses it to make bread) she uses our's most every day making something with no problem.... She has a Black and Decker that she used for years but it will not do half of what her new Cuisinart will do......She still uses her Black & Decker for some of the small stuff...... Kind of comical to watch her when she has the two (2) processors going...... Hope this answers your question.....Billy Edwards......3-19-15 at 10am « Show Less |
what size is the motor for the 11 cup model cuisinart | I have not had any issues with the processing power. On another site, i found this reference: "625 watt motor is powerful enough to handle a large variety of processing tasks" |
Do you think this will also fit in a Retina 13" Macbook Pro? I currently have an Air, but I am considering the rMBP. | No, it will not fit flush in a 13" Retina. The 13" retina has a very shallow SD card slot - this will stick out. |
Do you think this will also fit in a Retina 13" Macbook Pro? I currently have an Air, but I am considering the rMBP. | I haven't really had the opportunity to check out a rMBP. I would contact the seller and ask. He was very quick with his response to me! |
I have a quick release seat that turns when I'm riding. I'd like to replace with this seat or something similar, can I do that? | I had the same problem. The quick release lever turns to set the seat tightness so it does not turn, I believe that was clockwise. My husband showed me how to tighten. I haven't had any problem with the seat turning after we adjusted it by that lever. |
I have a quick release seat that turns when I'm riding. I'd like to replace with this seat or something similar, can I do that? | I also have a quick release seat. Yes you can replace it with this one. I did. |
I have a quick release seat that turns when I'm riding. I'd like to replace with this seat or something similar, can I do that? | I had no problem replacing the quick release post on my old saddle to the new saddle. You will need a couple adjustable wrenches. If you are having a problem with the quick release post you will need to get one of those also since it does not come with this saddle. |
I have a quick release seat that turns when I'm riding. I'd like to replace with this seat or something similar, can I do that? | You will need to order a replacement stem if its turning. And you might want to try just really tightening the quick release. http://www.amazon.com/Como-35-5cm-Length-Bicycle-Seatpost/dp/B009AQI566/ref=sr_1_2?ie=UTF8&qid;=1381354532&sr;=8-2&keywords;=Seat+stemA stem with this adapter will work for this seat. Just make sure you get one the right diameter, because if you get to wrong diameter it will either not fit or it will spin. |
Does the blade have a convex grind? It looks like it but I can't be sure. | The cutting edge is a modified Scandinavian Grind, which is very effective for carving, skinning and other general woods work. With a rockwell hardness of 56-58, the ease of sharpening is astounding. |
cost for clips and straps should mine break for ultraflex kneepads? | I don't know the answers. I ordered them as a gift for my boyfriend. I know, so sentimental. When I received them, I tried them on, as I do home repairs as well. Due to the design and materials, I immediately put them back in the box and sent them back. I hope this helps...Take care.... |
cost for clips and straps should mine break for ultraflex kneepads? | The straps are elastic and won't break. If they ever lose their stretch, they can easily be replaced with standard elastic from any sewing store, Amazon or Walmart. The pair of knee pads I received included an extra clip in case one of those breaks. |
cost for clips and straps should mine break for ultraflex kneepads? | I really don't know Grigsby's answer is spot on. I am a mechanic and have worn mine daily for nearly two years with no trouble from straps yet. I will never buy another knee pad. They are the best! |
cost for clips and straps should mine break for ultraflex kneepads? | I don't know about replacement cost but as I remember they came with a spare set of clips. |
What are the actual dimensions of the product in 19" and 23" versions? I have a 15-inch vertical dimension limitation in my cabinet (kitchen). | The bracket mount measures about 6 1/2 inches. You should be good with the 15 inch clearance. |
What are the actual dimensions of the product in 19" and 23" versions? I have a 15-inch vertical dimension limitation in my cabinet (kitchen). | If you scroll down to the Product Details it will give you the exact dimensions and weight for the selected product size. The 19" version that I have has about 4" to spare with the 15" cabinet space that I have. |
What are the actual dimensions of the product in 19" and 23" versions? I have a 15-inch vertical dimension limitation in my cabinet (kitchen). | 12" vertical without stand, or 14" with stand. 18" wide. Hope this helps ya Broke out the tape measure and checked it out personally, not just the spec pages. |
What are the actual dimensions of the product in 19" and 23" versions? I have a 15-inch vertical dimension limitation in my cabinet (kitchen). | With the stand it is 16". I do not know if it can be used without the stand attached. |
This dataset is a collection of question-answer pairs collected from Amazon QA. See Amazon QA for additional information. This dataset can be used directly with Sentence Transformers to train embedding models.
pair subset
str, str{
'query': 'What size are the tiles and how thick and what material?',
'answer': 'Tiles are 12" x 12", about 1/2 inch thick and made of plastic (not grippy/rubbery). Light weight, but sturdy. Easy to put together.'
}