Transformers documentation

XGLM

Transformers

You are viewing v4.19.4 version. A newer version v4.46.2 is available.

Join the Hugging Face community

and get access to the augmented documentation experience

Collaborate on models, datasets and Spaces

Faster examples with accelerated inference

Switch between documentation themes

to get started

XGLM

Overview

The XGLM model was proposed in Few-shot Learning with Multilingual Language Models by Xi Victoria Lin, Todor Mihaylov, Mikel Artetxe, Tianlu Wang, Shuohui Chen, Daniel Simig, Myle Ott, Naman Goyal, Shruti Bhosale, Jingfei Du, Ramakanth Pasunuru, Sam Shleifer, Punit Singh Koura, Vishrav Chaudhary, Brian O’Horo, Jeff Wang, Luke Zettlemoyer, Zornitsa Kozareva, Mona Diab, Veselin Stoyanov, Xian Li.

The abstract from the paper is the following:

Large-scale autoregressive language models such as GPT-3 are few-shot learners that can perform a wide range of language tasks without fine-tuning. While these models are known to be able to jointly represent many different languages, their training data is dominated by English, potentially limiting their cross-lingual generalization. In this work, we train multilingual autoregressive language models on a balanced corpus covering a diverse set of languages, and study their few- and zero-shot learning capabilities in a wide range of tasks. Our largest model with 7.5 billion parameters sets new state of the art in few-shot learning in more than 20 representative languages, outperforming GPT-3 of comparable size in multilingual commonsense reasoning (with +7.4% absolute accuracy improvement in 0-shot settings and +9.4% in 4-shot settings) and natural language inference (+5.4% in each of 0-shot and 4-shot settings). On the FLORES-101 machine translation benchmark, our model outperforms GPT-3 on 171 out of 182 translation directions with 32 training examples, while surpassing the official supervised baseline in 45 directions. We present a detailed analysis of where the model succeeds and fails, showing in particular that it enables cross-lingual in-context learning on some tasks, while there is still room for improvement on surface form robustness and adaptation to tasks that do not have a natural cloze form. Finally, we evaluate our models in social value tasks such as hate speech detection in five languages and find it has limitations similar to comparable sized GPT-3 models.

This model was contributed by Suraj. The original code can be found here.

XGLMConfig

class transformers.XGLMConfig

( vocab_size = 256008 max_position_embeddings = 2048 d_model = 1024 ffn_dim = 4096 num_layers = 24 attention_heads = 16 activation_function = 'gelu' dropout = 0.1 attention_dropout = 0.1 activation_dropout = 0.0 layerdrop = 0.0 init_std = 0.02 scale_embedding = True use_cache = True decoder_start_token_id = 2 pad_token_id = 1 bos_token_id = 0 eos_token_id = 2 **kwargs )

Parameters

vocab_size (int, optional, defaults to 256008) — Vocabulary size of the XGLM model. Defines the number of different tokens that can be represented by the inputs_ids passed when calling XGLMModel or FlaxXGLMModel.
max_position_embeddings (int, optional, defaults to 2048) — The maximum sequence length that this model might ever be used with. Typically set this to something large just in case (e.g., 512 or 1024 or 2048).
d_model (int, optional, defaults to 1024) — Dimension of the layers and the pooler layer.
ffn_dim (int, optional, defaults to 4096) — Dimension of the “intermediate” (often named feed-forward) layer in decoder.
num_layers (int, optional, defaults to 24) — Number of hidden layers Transformer decoder.
attention_heads (int, optional, defaults to 16) — Number of attention heads for each attention layer in the Transformer decoder.
activation_function (str or function, optional, defaults to "gelu") — The non-linear activation function (function or string) in the encoder and pooler. If string, "gelu", "relu", "silu" and "gelu_new" are supported.
dropout (float, optional, defaults to 0.1) — The dropout probability for all fully connected layers in the embeddings, dencoder, and pooler.
attention_dropout (float, optional, defaults to 0.1) — The dropout ratio for the attention probabilities.
activation_dropout (float, optional, defaults to 0.0) — The dropout ratio for activations inside the fully connected layer. layerdrop — (float, optional, defaults to 0.0): The LayerDrop probability for the encoder. See the [LayerDrop paper](see https://arxiv.org/abs/1909.11556) for more details.
init_std (float, optional, defaults to 0.02) — The standard deviation of the truncated_normal_initializer for initializing all weight matrices.
scale_embedding (bool, optional, defaults to True) — Scale embeddings by diving by sqrt(d_model).
use_cache (bool, optional, defaults to True) — Whether or not the model should return the last key/values attentions (not used by all models).

This is the configuration class to store the configuration of a XGLMModel. It is used to instantiate an XGLM model according to the specified arguments, defining the model architecture. Instantiating a configuration with the defaults will yield a similar configuration to that of the XGLM facebook/xglm-564M architecture.

Configuration objects inherit from PretrainedConfig and can be used to control the model outputs. Read the documentation from PretrainedConfig for more information.

Example:

>>> from transformers import XGLMModel, XGLMConfig

>>> # Initializing a XGLM facebook/xglm-564M style configuration
>>> configuration = XGLMConfig()

>>> # Initializing a model from the facebook/xglm-564M style configuration
>>> model = XGLMModel(configuration)

>>> # Accessing the model configuration
>>> configuration = model.config

XGLMTokenizer

class transformers.XGLMTokenizer

( vocab_file bos_token = '<s>' eos_token = '</s>' sep_token = '</s>' cls_token = '<s>' unk_token = '<unk>' pad_token = '<pad>' sp_model_kwargs: typing.Union[typing.Dict[str, typing.Any], NoneType] = None **kwargs )

Parameters

vocab_file (str) — Path to the vocabulary file.
bos_token (str, optional, defaults to "<s>") — The beginning of sequence token that was used during pretraining. Can be used a sequence classifier token.

When building a sequence using special tokens, this is not the token that is used for the beginning of sequence. The token used is the cls_token.
eos_token (str, optional, defaults to "</s>") — The end of sequence token.

When building a sequence using special tokens, this is not the token that is used for the end of sequence. The token used is the sep_token.
sep_token (str, optional, defaults to "</s>") — The separator token, which is used when building a sequence from multiple sequences, e.g. two sequences for sequence classification or for a text and a question for question answering. It is also used as the last token of a sequence built with special tokens.
cls_token (str, optional, defaults to "<s>") — The classifier token which is used when doing sequence classification (classification of the whole sequence instead of per-token classification). It is the first token of the sequence when built with special tokens.
unk_token (str, optional, defaults to "<unk>") — The unknown token. A token that is not in the vocabulary cannot be converted to an ID and is set to be this token instead.
pad_token (str, optional, defaults to "<pad>") — The token used for padding, for example when batching sequences of different lengths.
mask_token (str, optional, defaults to "<mask>") — The token used for masking values. This is the token used when training this model with masked language modeling. This is the token which the model will try to predict.
additional_special_tokens (List[str], optional, defaults to ["<s>NOTUSED", "</s>NOTUSED"]) — Additional special tokens used by the tokenizer.
sp_model_kwargs (dict, optional) — Will be passed to the SentencePieceProcessor.__init__() method. The Python wrapper for SentencePiece can be used, among other things, to set:
- enable_sampling: Enable subword regularization.
- nbest_size: Sampling parameters for unigram. Invalid for BPE-Dropout.
  - nbest_size = {0,1}: No sampling is performed.
  - nbest_size > 1: samples from the nbest_size results.
  - nbest_size < 0: assuming that nbest_size is infinite and samples from the all hypothesis (lattice) using forward-filtering-and-backward-sampling algorithm.
- alpha: Smoothing parameter for unigram sampling, and dropout probability of merge operations for BPE-dropout.
sp_model (SentencePieceProcessor) — The SentencePiece processor that is used for every conversion (string, tokens and IDs).

Adapted from RobertaTokenizer and XLNetTokenizer. Based on SentencePiece.

This tokenizer inherits from PreTrainedTokenizer which contains most of the main methods. Users should refer to this superclass for more information regarding those methods.

build_inputs_with_special_tokens

( token_ids_0: typing.List[int] token_ids_1: typing.Optional[typing.List[int]] = None ) → List[int]

Parameters

token_ids_0 (List[int]) — List of IDs to which the special tokens will be added.
token_ids_1 (List[int], optional) — Optional second list of IDs for sequence pairs.

Returns

List[int]

List of input IDs with the appropriate special tokens.

Build model inputs from a sequence or a pair of sequence for sequence classification tasks by concatenating and adding special tokens. An XLM-RoBERTa sequence has the following format:

single sequence: <s> X </s>
pair of sequences: <s> A </s></s> B </s>

get_special_tokens_mask

( token_ids_0: typing.List[int] token_ids_1: typing.Optional[typing.List[int]] = None already_has_special_tokens: bool = False ) → List[int]

Parameters

token_ids_0 (List[int]) — List of IDs.
token_ids_1 (List[int], optional) — Optional second list of IDs for sequence pairs.
already_has_special_tokens (bool, optional, defaults to False) — Whether or not the token list is already formatted with special tokens for the model.

Returns

List[int]

A list of integers in the range [0, 1]: 1 for a special token, 0 for a sequence token.

Retrieve sequence ids from a token list that has no special tokens added. This method is called when adding special tokens using the tokenizer prepare_for_model method.

create_token_type_ids_from_sequences

( token_ids_0: typing.List[int] token_ids_1: typing.Optional[typing.List[int]] = None ) → List[int]

Parameters

token_ids_0 (List[int]) — List of IDs.
token_ids_1 (List[int], optional) — Optional second list of IDs for sequence pairs.

Returns

List[int]

List of zeros.

Create a mask from the two sequences passed to be used in a sequence-pair classification task. XLM-RoBERTa does not make use of token type ids, therefore a list of zeros is returned.

save_vocabulary

( save_directory: str filename_prefix: typing.Optional[str] = None )

XGLMTokenizerFast

class transformers.XGLMTokenizerFast

( vocab_file = None tokenizer_file = None bos_token = '<s>' eos_token = '</s>' sep_token = '</s>' cls_token = '<s>' unk_token = '<unk>' pad_token = '<pad>' **kwargs )

Parameters

vocab_file (str) — Path to the vocabulary file.
bos_token (str, optional, defaults to "<s>") — The beginning of sequence token that was used during pretraining. Can be used a sequence classifier token.

When building a sequence using special tokens, this is not the token that is used for the beginning of sequence. The token used is the cls_token.
eos_token (str, optional, defaults to "</s>") — The end of sequence token.

When building a sequence using special tokens, this is not the token that is used for the end of sequence. The token used is the sep_token.
sep_token (str, optional, defaults to "</s>") — The separator token, which is used when building a sequence from multiple sequences, e.g. two sequences for sequence classification or for a text and a question for question answering. It is also used as the last token of a sequence built with special tokens.
cls_token (str, optional, defaults to "<s>") — The classifier token which is used when doing sequence classification (classification of the whole sequence instead of per-token classification). It is the first token of the sequence when built with special tokens.
unk_token (str, optional, defaults to "<unk>") — The unknown token. A token that is not in the vocabulary cannot be converted to an ID and is set to be this token instead.
pad_token (str, optional, defaults to "<pad>") — The token used for padding, for example when batching sequences of different lengths.
additional_special_tokens (List[str], optional, defaults to ["<s>NOTUSED", "</s>NOTUSED"]) — Additional special tokens used by the tokenizer.

Construct a “fast” XGLM tokenizer (backed by HuggingFace’s tokenizers library). Adapted from RobertaTokenizer and XLNetTokenizer. Based on BPE.

This tokenizer inherits from PreTrainedTokenizerFast which contains most of the main methods. Users should refer to this superclass for more information regarding those methods.

build_inputs_with_special_tokens

( token_ids_0: typing.List[int] token_ids_1: typing.Optional[typing.List[int]] = None ) → List[int]

Parameters

token_ids_0 (List[int]) — List of IDs to which the special tokens will be added.
token_ids_1 (List[int], optional) — Optional second list of IDs for sequence pairs.

Returns

List[int]

List of input IDs with the appropriate special tokens.

Build model inputs from a sequence or a pair of sequence for sequence classification tasks by concatenating and adding special tokens. An XLM-RoBERTa sequence has the following format:

single sequence: <s> X </s>
pair of sequences: <s> A </s></s> B </s>

create_token_type_ids_from_sequences

( token_ids_0: typing.List[int] token_ids_1: typing.Optional[typing.List[int]] = None ) → List[int]

Parameters

token_ids_0 (List[int]) — List of IDs.
token_ids_1 (List[int], optional) — Optional second list of IDs for sequence pairs.

Returns

List[int]

List of zeros.

Create a mask from the two sequences passed to be used in a sequence-pair classification task. XLM-RoBERTa does not make use of token type ids, therefore a list of zeros is returned.

XGLMModel

class transformers.XGLMModel

( config: XGLMConfig embed_tokens: typing.Optional[torch.nn.modules.sparse.Embedding] = None )

Parameters

config (XGLMConfig) — Model configuration class with all the parameters of the model. Initializing with a config file does not load the weights associated with the model, only the configuration. Check out the from_pretrained() method to load the model weights. config — XGLMConfig
embed_tokens (nn.Embedding) — output embedding

The bare XGLM Model transformer outputting raw hidden-states without any specific head on top. This model inherits from PreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)

This model is also a PyTorch torch.nn.Module subclass. Use it as a regular PyTorch Module and refer to the PyTorch documentation for all matter related to general usage and behavior.

Transformer decoder consisting of config.num_layers layers. Each layer is a XGLMDecoderLayer

forward

( input_ids: typing.Optional[torch.Tensor] = None attention_mask: typing.Optional[torch.Tensor] = None encoder_hidden_states: typing.Optional[torch.Tensor] = None encoder_attention_mask: typing.Optional[torch.Tensor] = None head_mask: typing.Optional[torch.Tensor] = None cross_attn_head_mask: typing.Optional[torch.Tensor] = None past_key_values: typing.Optional[typing.List[torch.FloatTensor]] = None inputs_embeds: typing.Optional[torch.Tensor] = None use_cache: typing.Optional[bool] = None output_attentions: typing.Optional[bool] = None output_hidden_states: typing.Optional[bool] = None return_dict: typing.Optional[bool] = None ) → transformers.modeling_outputs.BaseModelOutputWithPastAndCrossAttentions or tuple(torch.FloatTensor)

Parameters

input_ids (torch.LongTensor of shape (batch_size, sequence_length)) — Indices of input sequence tokens in the vocabulary. Padding will be ignored by default should you provide it.

Indices can be obtained using XGLMTokenizer. See PreTrainedTokenizer.encode() and PreTrainedTokenizer.call() for details.

What are input IDs?
attention_mask (torch.Tensor of shape (batch_size, sequence_length), optional) — Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:
- 1 for tokens that are not masked,
- 0 for tokens that are masked.
What are attention masks?
head_mask (torch.Tensor of shape (encoder_layers, encoder_attention_heads), optional) — Mask to nullify selected heads of the attention modules in the encoder. Mask values selected in [0, 1]:
- 1 indicates the head is not masked,
- 0 indicates the head is masked.
past_key_values (tuple(tuple(torch.FloatTensor)), optional, returned when use_cache=True is passed or when config.use_cache=True) — Tuple of tuple(torch.FloatTensor) of length config.n_layers, with each tuple having 2 tensors of shape (batch_size, num_heads, sequence_length, embed_size_per_head)) and 2 additional tensors of shape (batch_size, num_heads, encoder_sequence_length, embed_size_per_head).

Contains pre-computed hidden-states (key and values in the self-attention blocks and in the cross-attention blocks) that can be used (see past_key_values input) to speed up sequential decoding.

If past_key_values are used, the user can optionally input only the last input_ids (those that don’t have their past key value states given to this model) of shape (batch_size, 1) instead of all `input_ids``` of shape (batch_size, sequence_length). inputs_embeds (torch.FloatTensorof shape(batch_size, sequence_length, hidden_size), *optional*): Optionally, instead of passing input_idsyou can choose to directly pass an embedded representation. This is useful if you want more control over how to convertinput_ids` indices into associated vectors than the model’s internal embedding lookup matrix.
inputs_embeds (torch.FloatTensor of shape (batch_size, target_sequence_length, hidden_size), optional) — Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. If past_key_values is used, optionally only the last inputs_embeds have to be input (see past_key_values). This is useful if you want more control over how to convert input_ids indices into associated vectors than the model’s internal embedding lookup matrix.
use_cache (bool, optional) — If set to True, past_key_values key value states are returned and can be used to speed up decoding (see past_key_values).
output_attentions (bool, optional) — Whether or not to return the attentions tensors of all attention layers. See attentions under returned tensors for more detail.
output_hidden_states (bool, optional) — Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for more detail.
return_dict (bool, optional) — Whether or not to return a ModelOutput instead of a plain tuple.

Args — input_ids (torch.LongTensor of shape (batch_size, sequence_length)): Indices of input sequence tokens in the vocabulary. Padding will be ignored by default should you provide it.

Indices can be obtained using ~XGLMTokenizer. See PreTrainedTokenizer.encode() and PreTrainedTokenizer.call() for details.

What are input IDs? attention_mask (torch.Tensor of shape (batch_size, sequence_length), optional): Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:
- 1 for tokens that are not masked,
- 0 for tokens that are masked.
What are attention masks? encoder_hidden_states (torch.FloatTensor of shape (batch_size, encoder_sequence_length, hidden_size), optional): Sequence of hidden-states at the output of the last layer of the encoder. Used in the cross-attention of the decoder. encoder_attention_mask (torch.LongTensor of shape (batch_size, encoder_sequence_length), optional): Mask to avoid performing cross-attention on padding tokens indices of encoder input_ids. Mask values selected in [0, 1]:
- 1 for tokens that are not masked,
- 0 for tokens that are masked.
What are attention masks? head_mask (torch.Tensor of shape (num_layers, attention_heads), optional): Mask to nullify selected heads of the attention modules. Mask values selected in [0, 1]:
- 1 indicates the head is not masked,
- 0 indicates the head is masked.
cross_attn_head_mask (torch.Tensor of shape (num_layers, attention_heads), optional): Mask to nullify selected heads of the cross-attention modules. Mask values selected in [0, 1]:
- 1 indicates the head is not masked,
- 0 indicates the head is masked.
past_key_values (tuple(tuple(torch.FloatTensor)), optional, returned when use_cache=True is passed or when config.use_cache=True): Tuple of tuple(torch.FloatTensor) of length config.n_layers, with each tuple having 2 tensors of shape (batch_size, num_heads, sequence_length, embed_size_per_head)) and 2 additional tensors of shape (batch_size, num_heads, encoder_sequence_length, embed_size_per_head).

Contains pre-computed hidden-states (key and values in the self-attention blocks and in the cross-attention blocks) that can be used (see past_key_values input) to speed up sequential decoding.

If past_key_values are used, the user can optionally input only the last decoder_input_ids (those that don’t have their past key value states given to this model) of shape (batch_size, 1) instead of all decoder_input_ids of shape (batch_size, sequence_length). inputs_embeds (torch.FloatTensor of shape (batch_size, sequence_length, hidden_size), optional): Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This is useful if you want more control over how to convert input_ids indices into associated vectors than the model’s internal embedding lookup matrix. output_attentions (bool, optional): Whether or not to return the attentions tensors of all attention layers. See attentions under returned tensors for more detail. output_hidden_states (bool, optional): Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for more detail. return_dict (bool, optional): Whether or not to return a ModelOutput instead of a plain tuple.

Returns

transformers.modeling_outputs.BaseModelOutputWithPastAndCrossAttentions or tuple(torch.FloatTensor)

A transformers.modeling_outputs.BaseModelOutputWithPastAndCrossAttentions or a tuple of torch.FloatTensor (if return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the configuration (XGLMConfig) and inputs.

last_hidden_state (torch.FloatTensor of shape (batch_size, sequence_length, hidden_size)) — Sequence of hidden-states at the output of the last layer of the model.

If past_key_values is used only the last hidden-state of the sequences of shape (batch_size, 1, hidden_size) is output.
past_key_values (tuple(tuple(torch.FloatTensor)), optional, returned when use_cache=True is passed or when config.use_cache=True) — Tuple of tuple(torch.FloatTensor) of length config.n_layers, with each tuple having 2 tensors of shape (batch_size, num_heads, sequence_length, embed_size_per_head)) and optionally if config.is_encoder_decoder=True 2 additional tensors of shape (batch_size, num_heads, encoder_sequence_length, embed_size_per_head).

Contains pre-computed hidden-states (key and values in the self-attention blocks and optionally if config.is_encoder_decoder=True in the cross-attention blocks) that can be used (see past_key_values input) to speed up sequential decoding.
hidden_states (tuple(torch.FloatTensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) — Tuple of torch.FloatTensor (one for the output of the embeddings, if the model has an embedding layer, + one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).

Hidden-states of the model at the output of each layer plus the optional initial embedding outputs.
attentions (tuple(torch.FloatTensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) — Tuple of torch.FloatTensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.
cross_attentions (tuple(torch.FloatTensor), optional, returned when output_attentions=True and config.add_cross_attention=True is passed or when config.output_attentions=True) — Tuple of torch.FloatTensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

Attentions weights of the decoder’s cross-attention layer, after the attention softmax, used to compute the weighted average in the cross-attention heads.

The XGLMModel forward method, overrides the __call__ special method.

Although the recipe for forward pass needs to be defined within this function, one should call the Module instance afterwards instead of this since the former takes care of running the pre and post processing steps while the latter silently ignores them.

Example:

>>> from transformers import XGLMTokenizer, XGLMModel
>>> import torch

>>> tokenizer = XGLMTokenizer.from_pretrained("facebook/xglm-564M")
>>> model = XGLMModel.from_pretrained("facebook/xglm-564M")

>>> inputs = tokenizer("Hello, my dog is cute", return_tensors="pt")
>>> outputs = model(**inputs)

>>> last_hidden_states = outputs.last_hidden_state

XGLMForCausalLM

class transformers.XGLMForCausalLM

( config )

Parameters

config (XGLMConfig) — Model configuration class with all the parameters of the model. Initializing with a config file does not load the weights associated with the model, only the configuration. Check out the from_pretrained() method to load the model weights.

The XGLM Model transformer with a language modeling head on top (linear layer with weights tied to the input embeddings).

This model inherits from PreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)

This model is also a PyTorch torch.nn.Module subclass. Use it as a regular PyTorch Module and refer to the PyTorch documentation for all matter related to general usage and behavior.

forward

( input_ids: typing.Optional[torch.Tensor] = None attention_mask: typing.Optional[torch.Tensor] = None encoder_hidden_states: typing.Optional[torch.Tensor] = None encoder_attention_mask: typing.Optional[torch.Tensor] = None head_mask: typing.Optional[torch.Tensor] = None cross_attn_head_mask: typing.Optional[torch.Tensor] = None past_key_values: typing.Optional[typing.List[torch.FloatTensor]] = None inputs_embeds: typing.Optional[torch.Tensor] = None labels: typing.Optional[torch.Tensor] = None use_cache: typing.Optional[bool] = None output_attentions: typing.Optional[bool] = None output_hidden_states: typing.Optional[bool] = None return_dict: typing.Optional[bool] = None ) → transformers.modeling_outputs.CausalLMOutputWithCrossAttentions or tuple(torch.FloatTensor)

Parameters

input_ids (torch.LongTensor of shape (batch_size, sequence_length)) — Indices of input sequence tokens in the vocabulary. Padding will be ignored by default should you provide it.

Indices can be obtained using XGLMTokenizer. See PreTrainedTokenizer.encode() and PreTrainedTokenizer.call() for details.

What are input IDs?
attention_mask (torch.Tensor of shape (batch_size, sequence_length), optional) — Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:
- 1 for tokens that are not masked,
- 0 for tokens that are masked.
What are attention masks?
head_mask (torch.Tensor of shape (encoder_layers, encoder_attention_heads), optional) — Mask to nullify selected heads of the attention modules in the encoder. Mask values selected in [0, 1]:
- 1 indicates the head is not masked,
- 0 indicates the head is masked.
past_key_values (tuple(tuple(torch.FloatTensor)), optional, returned when use_cache=True is passed or when config.use_cache=True) — Tuple of tuple(torch.FloatTensor) of length config.n_layers, with each tuple having 2 tensors of shape (batch_size, num_heads, sequence_length, embed_size_per_head)) and 2 additional tensors of shape (batch_size, num_heads, encoder_sequence_length, embed_size_per_head).

Contains pre-computed hidden-states (key and values in the self-attention blocks and in the cross-attention blocks) that can be used (see past_key_values input) to speed up sequential decoding.

If past_key_values are used, the user can optionally input only the last input_ids (those that don’t have their past key value states given to this model) of shape (batch_size, 1) instead of all `input_ids``` of shape (batch_size, sequence_length). inputs_embeds (torch.FloatTensorof shape(batch_size, sequence_length, hidden_size), *optional*): Optionally, instead of passing input_idsyou can choose to directly pass an embedded representation. This is useful if you want more control over how to convertinput_ids` indices into associated vectors than the model’s internal embedding lookup matrix.
inputs_embeds (torch.FloatTensor of shape (batch_size, target_sequence_length, hidden_size), optional) — Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. If past_key_values is used, optionally only the last inputs_embeds have to be input (see past_key_values). This is useful if you want more control over how to convert input_ids indices into associated vectors than the model’s internal embedding lookup matrix.
use_cache (bool, optional) — If set to True, past_key_values key value states are returned and can be used to speed up decoding (see past_key_values).
output_attentions (bool, optional) — Whether or not to return the attentions tensors of all attention layers. See attentions under returned tensors for more detail.
output_hidden_states (bool, optional) — Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for more detail.
return_dict (bool, optional) — Whether or not to return a ModelOutput instead of a plain tuple.
labels (torch.LongTensor of shape (batch_size, sequence_length), optional) — Labels for computing the masked language modeling loss. Indices should either be in [0, ..., config.vocab_size] or -100 (see input_ids docstring). Tokens with indices set to -100 are ignored (masked), the loss is only computed for the tokens with labels in [0, ..., config.vocab_size].

Returns

transformers.modeling_outputs.CausalLMOutputWithCrossAttentions or tuple(torch.FloatTensor)

A transformers.modeling_outputs.CausalLMOutputWithCrossAttentions or a tuple of torch.FloatTensor (if return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the configuration (XGLMConfig) and inputs.

loss (torch.FloatTensor of shape (1,), optional, returned when labels is provided) — Language modeling loss (for next-token prediction).
logits (torch.FloatTensor of shape (batch_size, sequence_length, config.vocab_size)) — Prediction scores of the language modeling head (scores for each vocabulary token before SoftMax).
hidden_states (tuple(torch.FloatTensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) — Tuple of torch.FloatTensor (one for the output of the embeddings, if the model has an embedding layer, + one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).

Hidden-states of the model at the output of each layer plus the optional initial embedding outputs.
attentions (tuple(torch.FloatTensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) — Tuple of torch.FloatTensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.
cross_attentions (tuple(torch.FloatTensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) — Tuple of torch.FloatTensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

Cross attentions weights after the attention softmax, used to compute the weighted average in the cross-attention heads.
past_key_values (tuple(tuple(torch.FloatTensor)), optional, returned when use_cache=True is passed or when config.use_cache=True) — Tuple of torch.FloatTensor tuples of length config.n_layers, with each tuple containing the cached key, value states of the self-attention and the cross-attention layers if model is used in encoder-decoder setting. Only relevant if config.is_decoder = True.

Contains pre-computed hidden-states (key and values in the attention blocks) that can be used (see past_key_values input) to speed up sequential decoding.

The XGLMForCausalLM forward method, overrides the __call__ special method.

Although the recipe for forward pass needs to be defined within this function, one should call the Module instance afterwards instead of this since the former takes care of running the pre and post processing steps while the latter silently ignores them.

Example:

>>> import torch
>>> from transformers import XGLMTokenizer, XGLMForCausalLM

>>> tokenizer = XGLMTokenizer.from_pretrained("facebook/xglm-564M")
>>> model = XGLMForCausalLM.from_pretrained("facebook/xglm-564M")

>>> inputs = tokenizer("Hello, my dog is cute", return_tensors="pt")
>>> outputs = model(**inputs, labels=inputs["input_ids"])
>>> loss = outputs.loss
>>> logits = outputs.logits

FlaxXGLMModel

class transformers.FlaxXGLMModel

( config: XGLMConfig input_shape: typing.Tuple[int] = (1, 1) seed: int = 0 dtype: dtype = <class 'jax._src.numpy.lax_numpy.float32'> _do_init: bool = True **kwargs )

Parameters

config (XGLMConfig) — Model configuration class with all the parameters of the model. Initializing with a config file does not load the weights associated with the model, only the configuration. Check out the from_pretrained() method to load the model weights.
dtype (jax.numpy.dtype, optional, defaults to jax.numpy.float32) — The data type of the computation. Can be one of jax.numpy.float32, jax.numpy.float16 (on GPUs) and jax.numpy.bfloat16 (on TPUs).

This can be used to enable mixed-precision training or half-precision inference on GPUs or TPUs. If specified all the computation will be performed with the given dtype.

Note that this only specifies the dtype of the computation and does not influence the dtype of model parameters.

If you wish to change the dtype of the model parameters, see to_fp16() and to_bf16().

The bare XGLM Model transformer outputting raw hidden-states without any specific head on top. This model inherits from FlaxPreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)

This model is also a Flax Linen flax.nn.Module subclass. Use it as a regular Flax Module and refer to the Flax documentation for all matter related to general usage and behavior.

Finally, this model supports inherent JAX features such as:

call

( input_ids: ndarray attention_mask: typing.Optional[jax._src.numpy.ndarray.ndarray] = None position_ids: typing.Optional[jax._src.numpy.ndarray.ndarray] = None encoder_hidden_states: typing.Optional[jax._src.numpy.ndarray.ndarray] = None encoder_attention_mask: typing.Optional[jax._src.numpy.ndarray.ndarray] = None output_attentions: typing.Optional[bool] = None output_hidden_states: typing.Optional[bool] = None return_dict: typing.Optional[bool] = None train: bool = False params: dict = None past_key_values: dict = None dropout_rng: PRNGKey = None ) → transformers.modeling_flax_outputs.FlaxBaseModelOutputWithPastAndCrossAttentions or tuple(torch.FloatTensor)

Parameters

input_ids (jnp.ndarray of shape (batch_size, sequence_length)) — Indices of input sequence tokens in the vocabulary. Padding will be ignored by default should you provide it.

Indices can be obtained using ~XGLMTokenizer. See PreTrainedTokenizer.encode() and PreTrainedTokenizer.call() for details.

What are input IDs?
attention_mask (jnp.ndarray of shape (batch_size, sequence_length), optional) — Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:
- 1 for tokens that are not masked,
- 0 for tokens that are masked.
What are attention masks?
position_ids (numpy.ndarray of shape (batch_size, sequence_length), optional) — Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].
output_attentions (bool, optional) — Whether or not to return the attentions tensors of all attention layers. See attentions under returned tensors for more detail.
output_hidden_states (bool, optional) — Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for more detail.
return_dict (bool, optional) — Whether or not to return a ModelOutput instead of a plain tuple.

Returns

transformers.modeling_flax_outputs.FlaxBaseModelOutputWithPastAndCrossAttentions or tuple(torch.FloatTensor)

A transformers.modeling_flax_outputs.FlaxBaseModelOutputWithPastAndCrossAttentions or a tuple of torch.FloatTensor (if return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the configuration (XGLMConfig) and inputs.

last_hidden_state (jnp.ndarray of shape (batch_size, sequence_length, hidden_size)) — Sequence of hidden-states at the output of the last layer of the model.

If past_key_values is used only the last hidden-state of the sequences of shape (batch_size, 1, hidden_size) is output.
past_key_values (tuple(tuple(jnp.ndarray)), optional, returned when use_cache=True is passed or when config.use_cache=True) — Tuple of tuple(jnp.ndarray) of length config.n_layers, with each tuple having 2 tensors of shape (batch_size, num_heads, sequence_length, embed_size_per_head)) and optionally if config.is_encoder_decoder=True 2 additional tensors of shape (batch_size, num_heads, encoder_sequence_length, embed_size_per_head).

Contains pre-computed hidden-states (key and values in the self-attention blocks and optionally if config.is_encoder_decoder=True in the cross-attention blocks) that can be used (see past_key_values input) to speed up sequential decoding.
hidden_states (tuple(jnp.ndarray), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) — Tuple of jnp.ndarray (one for the output of the embeddings + one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).

Hidden-states of the model at the output of each layer plus the initial embedding outputs.
attentions (tuple(jnp.ndarray), optional, returned when output_attentions=True is passed or when config.output_attentions=True) — Tuple of jnp.ndarray (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.
cross_attentions (tuple(jnp.ndarray), optional, returned when output_attentions=True and config.add_cross_attention=True is passed or when config.output_attentions=True) — Tuple of jnp.ndarray (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

Attentions weights of the decoder’s cross-attention layer, after the attention softmax, used to compute the weighted average in the cross-attention heads.

The FlaxXGLMPreTrainedModel forward method, overrides the __call__ special method.

Although the recipe for forward pass needs to be defined within this function, one should call the Module instance afterwards instead of this since the former takes care of running the pre and post processing steps while the latter silently ignores them.

Example:

>>> from transformers import XGLMTokenizer, FlaxXGLMModel

>>> tokenizer = XGLMTokenizer.from_pretrained("facebook/xglm-564M")
>>> model = FlaxXGLMModel.from_pretrained("facebook/xglm-564M")

>>> inputs = tokenizer("Hello, my dog is cute", return_tensors="jax")
>>> outputs = model(**inputs)

>>> last_hidden_states = outputs.last_hidden_state

FlaxXGLMForCausalLM

class transformers.FlaxXGLMForCausalLM

( config: XGLMConfig input_shape: typing.Tuple[int] = (1, 1) seed: int = 0 dtype: dtype = <class 'jax._src.numpy.lax_numpy.float32'> _do_init: bool = True **kwargs )

Parameters

config (XGLMConfig) — Model configuration class with all the parameters of the model. Initializing with a config file does not load the weights associated with the model, only the configuration. Check out the from_pretrained() method to load the model weights.
dtype (jax.numpy.dtype, optional, defaults to jax.numpy.float32) — The data type of the computation. Can be one of jax.numpy.float32, jax.numpy.float16 (on GPUs) and jax.numpy.bfloat16 (on TPUs).

This can be used to enable mixed-precision training or half-precision inference on GPUs or TPUs. If specified all the computation will be performed with the given dtype.

Note that this only specifies the dtype of the computation and does not influence the dtype of model parameters.

If you wish to change the dtype of the model parameters, see to_fp16() and to_bf16().

The XGLM Model transformer with a language modeling head on top (linear layer with weights tied to the input embeddings).

This model inherits from FlaxPreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)

This model is also a Flax Linen flax.nn.Module subclass. Use it as a regular Flax Module and refer to the Flax documentation for all matter related to general usage and behavior.

Finally, this model supports inherent JAX features such as:

call

( input_ids: ndarray attention_mask: typing.Optional[jax._src.numpy.ndarray.ndarray] = None position_ids: typing.Optional[jax._src.numpy.ndarray.ndarray] = None encoder_hidden_states: typing.Optional[jax._src.numpy.ndarray.ndarray] = None encoder_attention_mask: typing.Optional[jax._src.numpy.ndarray.ndarray] = None output_attentions: typing.Optional[bool] = None output_hidden_states: typing.Optional[bool] = None return_dict: typing.Optional[bool] = None train: bool = False params: dict = None past_key_values: dict = None dropout_rng: PRNGKey = None ) → transformers.modeling_flax_outputs.FlaxCausalLMOutputWithCrossAttentions or tuple(torch.FloatTensor)

Parameters

input_ids (jnp.ndarray of shape (batch_size, sequence_length)) — Indices of input sequence tokens in the vocabulary. Padding will be ignored by default should you provide it.

Indices can be obtained using ~XGLMTokenizer. See PreTrainedTokenizer.encode() and PreTrainedTokenizer.call() for details.

What are input IDs?
attention_mask (jnp.ndarray of shape (batch_size, sequence_length), optional) — Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:
- 1 for tokens that are not masked,
- 0 for tokens that are masked.
What are attention masks?
position_ids (numpy.ndarray of shape (batch_size, sequence_length), optional) — Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].
output_attentions (bool, optional) — Whether or not to return the attentions tensors of all attention layers. See attentions under returned tensors for more detail.
output_hidden_states (bool, optional) — Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for more detail.
return_dict (bool, optional) — Whether or not to return a ModelOutput instead of a plain tuple.

Returns

transformers.modeling_flax_outputs.FlaxCausalLMOutputWithCrossAttentions or tuple(torch.FloatTensor)

A transformers.modeling_flax_outputs.FlaxCausalLMOutputWithCrossAttentions or a tuple of torch.FloatTensor (if return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the configuration (XGLMConfig) and inputs.

logits (jnp.ndarray of shape (batch_size, sequence_length, config.vocab_size)) — Prediction scores of the language modeling head (scores for each vocabulary token before SoftMax).
hidden_states (tuple(jnp.ndarray), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) — Tuple of jnp.ndarray (one for the output of the embeddings + one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).

Hidden-states of the model at the output of each layer plus the initial embedding outputs.
attentions (tuple(jnp.ndarray), optional, returned when output_attentions=True is passed or when config.output_attentions=True) — Tuple of jnp.ndarray (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.
cross_attentions (tuple(jnp.ndarray), optional, returned when output_attentions=True is passed or when config.output_attentions=True) — Tuple of jnp.ndarray (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

Cross attentions weights after the attention softmax, used to compute the weighted average in the cross-attention heads.
past_key_values (tuple(tuple(jnp.ndarray)), optional, returned when use_cache=True is passed or when config.use_cache=True) — Tuple of jnp.ndarray tuples of length config.n_layers, with each tuple containing the cached key, value states of the self-attention and the cross-attention layers if model is used in encoder-decoder setting. Only relevant if config.is_decoder = True.

Contains pre-computed hidden-states (key and values in the attention blocks) that can be used (see past_key_values input) to speed up sequential decoding.

The FlaxXGLMPreTrainedModel forward method, overrides the __call__ special method.

Although the recipe for forward pass needs to be defined within this function, one should call the Module instance afterwards instead of this since the former takes care of running the pre and post processing steps while the latter silently ignores them.

Example:

>>> from transformers import XGLMTokenizer, FlaxXGLMForCausalLM

>>> tokenizer = XGLMTokenizer.from_pretrained("facebook/xglm-564M")
>>> model = FlaxXGLMForCausalLM.from_pretrained("facebook/xglm-564M")

>>> inputs = tokenizer("Hello, my dog is cute", return_tensors="np")
>>> outputs = model(**inputs)

>>> # retrieve logts for next token
>>> next_token_logits = outputs.logits[:, -1]

←WavLM XLM→