text
stringlengths
65
6.02k
class
stringclasses
3 values
Help! - Disappearing Groups!!! Organization: University of British Columbia, Vancouver, B.C., Canada Lines: 30 Distribution: world NNTP-Posting-Host: unixg.ubc.ca Salutations! I don't usually subscribe to these newsgroups so I would really appreciate it if someone could possibly e-mail me the answer to my problem. I have been using Windows 3.1 since buying it last winter but I have just now come across an annoying bug. I now have about 8 different groups in program manager but it seems that everytime I install something new that makes a new group, it promptly disappears after I turn of windows! This happened when I installed Excel and WinFax Pro v.3. They both created their own groups but when I turned off windows and reran them, they were gone. I had to manually pull them up as new items and put them in a previously existing group as all new gropus disappear as soon as I turn off windows. my set up: precision 386dx-25 w/ 4 megs Trident 8900c with 1 meg Windows 3.1 running in 800x600 colour mode logitech mouseman Thank you in advance! Emile Woo -- ------------------------------------------------------------------------------ Emile Woo, Student Representative to Senate | .sig unavailable. Holding Internet: | referendum to decide politic- Tel: 822-6101 | ally correct witticism.
comp.os.ms-windows.misc
Any updated Canon BJ-200 driver Organization: dis Lines: 7 Distribution: world NNTP-Posting-Host: hal.ai.mit.edu Hi ... can anyone tell me where I can get a copy of updated Canon BJ-200 printer driver for Windows 3.1, if any ? I have ver 1.0 which comes with my BJ-200 printer, I just wonder if there is any newer version. Thanks very much, please email.
comp.os.ms-windows.misc
last Distribution: usa Organization: Milwaukee School Of Engineering, Milwaukee, WI USA Lines: 20 I have two questions: 1) I have been having troubles with my Wordperfect for Windows. When I try to select and change fonts, etc. some of the text disappears. I tried to center two lines once, and the second line disappeared. I can not find the error, and I do not know how to correct it. 2) Is this the right newsgroup? Where should I go? E-mail prefered... _____ Who else is still waiting for "Naked Gun Part | | " ''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/ '/''/'Nathan'Narloch''/''/''/'""/''/''/''/' /''/''/''/''/''or'/'""'/''/'' ''/''/Milw,/WI/53207/''/'"Join'the'Official'Psycho/Team..."/''/''/ '/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/'
comp.os.ms-windows.misc
Chera Bekker <>WANTED: Xterm emulator for windows 3.1 Keywords: xterm Reply-To: Organization: University of Twente, Enschede, The Netherlands Lines: 14 Hello, I am looking for a Xterm emulator which runs under windows 3.1. Please reply via E-mail. Thanks. Chera Bekker -- H.G. Bekker E-mail: Faculty of Applied Physics Voice: +3153893107 University of Twente Fax: +3153354003 The Netherlands
comp.os.ms-windows.misc
Re: WANTED: Address SYMANTEC Reply-To: Organization: University of Illinois at Urbana Lines: 27 writes: >I am looking for the exact address of the Symantec Coporatoin, which >distributes Norton Desktop and other Windows software. > >The information I am looking for is: > >Mail address >Phone number >Fax number >E-mail address Try or > >Thanks in advance. > >-- >*** Nothing beats skiing, if you want to have real fun during holidays. *** >*** Rob de Winter Philips Research, IST/IT, Building WL-1 *** >*** P.O. Box 80000, 5600 JA Eindhoven. The Netherlands *** >*** Tel: +31 40 743621 E-mail: *** -- --- Ken Lam Network Administrator @ University of Charleston / Dept of Biology & Geology S.C. Space Grant Consortium -792-4969 / FAX -792-5446
comp.os.ms-windows.misc
Truetype OEM font with line drawing characters etc wanted Distribution: world Organization: Cavendish Systems Reply-To: X-Newsreader: Simple NEWS 1.90 Lines: 13 Title says it all: I'm in need of a Truetype OEM character set font - ie one that contains the line drawing and other characters in the PC character set similar to those you get when running a text mode application. If anyone could point me at such a thing, I'd be grateful. [The only OEM fonts included with Windows are not Truetype.] Regards, -- Colin Manning
comp.os.ms-windows.misc
Help on bitmaps Summary: Bitmap size Keywords: Bitmap, windows 3.1, SDK Organization: Prentice Centre, University of Queensland Lines: 18 I wonder if anyone can tell me whether or not I can create a bitmap of any size? I followed the bitmap creation example in SDK manual and specified a 24x24 bitmap and supplied a byte string with 72 chars. But I just cannot get the right bitmap image. I changed the width/height to 32x32 and used the same value string and got the image. The example in the manual is 64x32 size, which are multiple of 2 bytes. Can you define a bitmap image of any size? Thanks very much. G Chen -- G. Chen, Centre for Information Technology Research, University of Queensland, Australia 4072 Tel: +61 7 365 4325, Fax +61 7 365 4399
comp.os.ms-windows.misc
Proteced Mode Organization: University of Tromsoe Lines: 1 I'm looking for information how W-NT uses Proteced Mode.
comp.os.ms-windows.misc
Mathcad 4.0 swap file? Organization: Scientific Computing Divison/NCAR Boulder, CO Lines: 119 Reposting and summarizing, for your information or additional comment. *** THIS IS LONG *** I have 16MB of memory on my 386SX , an Intel math coprocessor, and a 120MB hard drive with 20MB free . I have been running Mathcad 3.1, under Windows 3.1 in enhanced mode, with a 5MB RAM drive, 2MB/1MB Smart drive, and no swap file for several months. I am interested in the faster Mathcad 4.0, but I am concerned about reported swap file requirements and the legitimacy of Mathsoft's claim about increased speed. TO 386SX USERS: Will Mathcad 4.0 run without a swap file, or insist that I use a swap file? So far, in response to a less detailed description of my setup, or in unrelated postings, the more informed answers, on the net or by E-mail, appear to be: 1) by >> >> According to Mathsoft, no. Mathcad uses the swap file extensively so as >> not to overburden the physical resources. They say this is actually a >> win32s feature. A figure of 10MB was indicated to me as a minimum. But >> you might try anyway! 2) by >> >> I'm not all that certain that Mathcad is the culprit here. >> >> I have a 486/66DX2 with 16MB of main memory , >> which I have been running without any swapfile. When I installed the >> WIN32s subsystem from the March Beta of the NT SDK, the WIN32s subsystem >> itself demanded the presence of a swapfile. The only WIN32s program >> I've run to date is the 32-bit version of Freecell that came with that >> subsystem. >> >> I gave Windows a small temporary swapfile , and all seems well. 3) by >> >> What is Win32? I upgraded to Mathcad 4.0 and it installed a directory for >> Win32 under \windows\system . During the upgrade it told me that win32 >> was required. 4) by >> >> MathCad 4.0 makes use of the Win32s libraries. You've probably >> heard about Win32s, it is a 32-bit Windows library that provides >> much of the Windows NT functionality but can be run under Windows 3.1. 5) by >> >> I also have 16 Mb of ram, and indeed Mathcad 4.0 insisted on a permanent >> swapfile; it would not run otherwise. 6) by >> >> 3) MathCAD absolutely requires 4MB RAM or 8MB RAM >> . It will give you a not enough memory error if the >> swap file is less than 8MB. It is a MAJOR resource hog. If you do not >> load the symbolic processor or the smart math, it takes about 5MB of RAM >> just to load (again, due to the win32s libraries. ******************************************************************************** * * * So it seems that in addition to the system requirements shown on Mathsoft's * * advertisement for 4.0, that you need a swap file, possibly as big as 12MB. * * Looks like I would just need an 8MB swap file, and would need to choose between a faster permanent swap file, or a slower temporary swap file* * * * Apparently a Win32 subsystem ships with Mathcad 4.0 - how much disk space * * does this require? * * * ******************************************************************************** I also received these answers: 1) by >> >> If you've got 16 megs of RAM, why not configure 10megs as a ram disk for >> Mathcad? DOS 6 permits different bootup configurations. ******************************************************************************** * * * Can Mathcad 4.0 + Win32 be configured to use such a RAM drive instead of a * * swap file? If not, I don't see how using DOS 6.0 for an alternate bootup * * would provide Windows with this swap file. Some time back I remember a * * discussion about the issues of using a RAM drive to support a swap file, * * but I thought this involved slower, < 8MB systems. * * * * I have DOS 6.0 but for various reasons have not yet done a full installation.* * * * By the way, is a full installation of DOS 6.0 required to avail oneself of * * the "alternate bootup" feature? Which files from the installation disks are * * required? * * * ******************************************************************************** 2) by >> >> Presumeably, you mean without a _permanent_ swap file. If Windows needs a >> swap file, it will upo and create one if a permanent one doesn't exist. >> Permanent is generally faster though. I don't know why Mathcad wouldn't >> be happy with either type--Ver. 3.0 is and so should any program conforming >> to the Win specification. ********************************************************************************* * * * So far, 16MB has been enough RAM to avoid the overhead of running ANY swap * * file - I have been running Mathcad 3.1 under Windows 3.1 without one. * * * *********************************************************************************
comp.os.ms-windows.misc
Windows NT, HELP! PLEASE HELP! Distribution: world Organization: Univ of Cincinnati Academic IT Services Lines: 26 WINDOWS NT I need some information on the new Windows NT. Anything you have would be appreciated. I know nothing about it. Some questions... Memory requirements, hard drive space, release date? is it out? How is IBM reacting? Intel? Can it replace other LAN OS's? ANYTHING else like specs, speed, etc.. Thanks in advance! Luke Email me at internet address: bitnet address:
comp.os.ms-windows.misc
Subject: ===> EPS display software? Organization: BC Systems Corporation Nntp-Posting-Host: bcsc02.gov.bc.ca Lines: 4 Does any one know of any shareware/freeware software which lets one display EPS files on a PC with DOS and/or Windows??? Your reply would be much appreciated. Thanks. Hal Adam,
comp.os.ms-windows.misc
Re: Hercules Graphite? Nntp-Posting-Host: silver.ucs.indiana.edu Organization: Indiana University Lines: 20 In article <> writes: >Has anyone used a Hercules Graphite adapter? It looks good on paper, and >Steve Gibson gave it a very good review in Infoworld. I'd love to get a >real-world impression, though -- how is the speed? Drivers? Support? The PC World reviewers found out that the Herc people had hard-coded Winbench text into the driver. Clever, no? In any case, the Winbench results are pretty much inflated. When and if you get one send me mail.. I might buy that ATI GU+ off you.. 9-) -- ------------------------------------------------------------------------------- Iskandar Taib | The only thing worse than Peach ala Internet: | Frog is Frog ala Peach Bitnet: !
comp.os.ms-windows.misc
Re: Please Refresh On Internet Access To CompuServe Organization: Georgia State University Lines: 22 writes: >Hi, >sometime ago there are some discussions on gaining CompuServe access thru >the Internet. But I seem to misplace those articles. Can someone please >refresh me where I can telnet to to gain access. >Hopefully I can download files as well. This should be in the FAQ, it only get asked about twenty times a month There is *NO*, that's right, *NO* telnet access to Compuserve, no ftp access, no gopher access....no Internet services except e-mail. You can telnet to hermes.merit.edu, but that routes you through Sprintnet, which is horrendously expensive. -- Tom Gillman, Systems Programmer | "AAAAAGGGGHHHH" Wells Computer Center-Ga. State Univ. | -- Any "Classic" Star Trek Security 651-4503 | officer sometime during the show GSU doesn't care what I say on the Internet, why should you?
comp.os.ms-windows.misc
VideoBlaster & PC SPEAKER Keywords: Video Blaster Speaker Driver Reply-To: Organization: University of Kaiserslautern Lines: 28 Software that comes together with the VideoBlaster is designed to work together with the SoundBlaster . Since I do not own a SoundBlaster: is there a possibility to use the PC Speaker driver to play audio files for the VideoBlaster ? I think what I should have is a device driver for the Media Player that controls the PC Speaker Driver instead of the SoundBlaster card . Has anybody heard of such a driver? Or am I on the wrong track? Any information on this appreciated! _V_ | Joerg Meyer / \ | E-Mail: |O O| | University of Kaiserslautern, Germany ooO--U--Ooo | ------- This space for rent ! -------
comp.os.ms-windows.misc
Re: multiple desktops Nntp-Posting-Host: tinman Organization: Prodigy Services Company, White Plains, NY Lines: 16 In article <> writes: > >Is there a free/share package that will allow multiple >desktops in windows 3.1. What is desired is to have a desk top >for several people that each can personalize by name and choice >of programs etc. Amishware has one included in their package. They were advertising here on the net a couple of weeks ago with a riduculously low price. Does anyone remember what it was ? -- Charles Emmons | | These opinions are Prodigy Services Co. | charles% | mine alone, unless White Plains NY 10601 | Voice 914-993-8856 | you would like to PRODIGY ID - KJRD82A | FAX 914-993-8659 | share them.
comp.os.ms-windows.misc
Panasonic KX-P1091i Driver? Organization: Drexel University, Phila. Pa. Lines: 2 Does anyone out there know if there are print drivers for Windows for the Panasonic KX-P1091i 9-pin dot matrix printer?
comp.os.ms-windows.misc
David A. FuessMathCad 4.0 vs NDW 2.2 Organization: UC LLNL Lines: 23 Distribution: usa NNTP-Posting-Host: talon.llnl.gov I just got off the phone with Mathsoft technical service. They are now admitting a problem of unknown nature with Maple and Norton Desktop for Windows. They have no clue at this time and are collecting configuration information on the systems which exhibit the problem. Anyone having problems loading the Maple solver in MathCad 4.0 under NDW shoud call technical support at 617-577-1017. They made no schedule promices, but are actively working on the problem. In the meantime, the workaround is to provide a configuration selection in autoexec.bat to use PROGMAN whenever you plan to use the Maple solver and NDW otherwise. I am using Norton BE to place a little menu on the screen with a 5 second timeout to auto boot NDW. +---------------------------------+----------------------+ | _/ _/ _/ _/ _/ | David A. Fuess | | _/ _/ _/_/ _/ _/ | Dir, Center for EECS | | _/ _/ _/ _/_/ _/ | Phone: 423-2436 | | _/_/_/ _/_/_/ _/ _/ _/_/_/ | Fax: 422-9343 | +-------- Lawrence Livermore National Laboratory --------+
comp.os.ms-windows.misc
Qestion about amipro demo files on cica Organization: Department of Psychology, University of Toronto Distribution: na Lines: 18 Hello I have a question about the demo files for amipro v3 uploaded in cica. I downloaded it and tryied to install it. However, it didn't work. In addition, it altered or eliminated my NWRES2.dll file so that I had to reinstall my Norton Desktop again. Is there anything I have to know to install it or do I eventually have to ask Lotus to send a working model to me ? I just want to see its look and feel before buying it. Any pointer would be greatly appreciated. Thank you Hiroto
comp.os.ms-windows.misc
Steve Frampton <>Is "Kermit" available for Windows 3.0/3.1? Summary: Looking for Windows Kermit. Keywords: windows kermit comm app Reply-To: Distribution: world Organization: Vicuna Systems, Kingston, Ontario, CANADA Lines: 16 Content-Type: text/plain; charset=us-ascii Hello all: I was wondering, is the "Kermit" package available for Microsoft Windows 3.0/3.1? Any information would be greatly appreciated. Please e-mail or post. Thanks in advance! +--------+< Unabashed Shabba Ranks Fan! >+------+--------------------+ | Steve Frampton - | Steve Frampton | | I collect postcards! If you send me one from | 501-A Princess St. | | your area, I'll send one in return. Send to >| Kingston, Ontario | | | CANADA K7L 1C3 | +-----------------------------------------------+--------------------+
comp.os.ms-windows.misc
Re: Borland's Paradox Offer Nntp-Posting-Host: brahms.udel.edu Organization: University of Delaware Distribution: usa Lines: 19 >I am considering buying Borland's Paradox for Windows since I >would like to use a database with Windows for both work/home use. I would like to advantage >of Borland's "$129.95 until April 30" offer if this package >is everything that Borland claims it to be. So, I was >wondering ... has anybody used this and/or have any opinions? > >-- Tom Belmonte I've been using MS Access and I am quite pleased with it. It's relatively easy to learn, very easy to use and somewhat easy to program. I highly recomend it, particularly at $99.00! I have not used Paradox for Windows, but I don't expect it to be $30.00 better than Access . --Dave
comp.os.ms-windows.misc
Organization: Penn State University Azmi Hashim <>Re: Trident 8900 *CL* 1280x1024 driver? Lines: 18 In article <>, says: >Please excuse if FAQ but... >New Trident 8900CL based card claims to have 1280x1024 support. >Drivers with card indicate several 1280x1024 drivers on diskette. >Windows 3.1 does not make all drivers on diskette available to >configuration dialog box. Any suggestion? >Thanx; please e-mail. > Since we are in the subject, I have one more question. I have a Trident 8900C Video Card. I want to know what is the latest video driver for it. So far, all I can find is that an old driver dated Aug. 92 in garbo.uwasa.fi Anyone have any info ? Please e-mail me at -Az.
comp.os.ms-windows.misc
Re: ATM Article-I.D.: life.1r6m6hINNg6b Organization: MIT Artificial Intelligence Lab Lines: 29 NNTP-Posting-Host: kauai.ai.mit.edu In-reply-to: 's message of Wed, 21 Apr 1993 20:20:28 GMT In article <> writes: >>So good that there isn't any diff whether or not ATManager is turned >>on or not. Is it worth it to run ATM at all? Especially with these >>better printer technologies ... and TT? > >There are some fonts that are only available as PS fonts. If you >have a PS font that you want to use, use ATM. Otherwise, it is >a waste of system resources. > -----Or, if you need to use a service bureau and they're only set up to use Type 1 fonts. From what I've heard the results of outputting TT fonts as Type 1 is _not_ as good as using high-quality Type 1 fonts in the first place. Unless you `print' to file with the correct resolution set for the final output device . A problem with TT fonts in Windows is that they do get converted to T1 format OK, and the hinting is even used while this is done, but the resulting T1 fonts are NOT hinted. The result is that they WILL work fine on a device of the resolution assumed by the printer driver when the PS file is generated, but they will not look good when printed at a different resolution. So when you print to an attached PS printer, with the PS driver set up for this printer results, may be quite good. But if you take a PS file made for that printer and run it on a device of different resolution , then the results may not be so good.
comp.os.ms-windows.misc
Organization: Penn State University <>Fall Comdex '93 Lines: 8 Does anyone out there have any info on the up and coming fall comdex '93? I was asked by one of my peers to get any info that might be available. Or, could anyone point me in the right direction? Any help would be appreciated. Dave Stevens Training and Multimedia Services Penn State University
comp.os.ms-windows.misc
Re: Hercules Graphite? Organization: Software Metrics Inc. Lines: 56 > writes: >> Has anyone used a Hercules Graphite adapter? It looks good on paper, and >> Steve Gibson gave it a very good review in Infoworld. I'd love to get a >> real-world impression, though -- how is the speed? Drivers? Support? writes: > The PC World reviewers found out that the Herc people had hard-coded > Winbench text into the driver. Clever, no? In any case, the Winbench > results are pretty much inflated. Two things that annoyed me about the PC Magazine review: 1. Their benchmarking technique is seriously flawed, as was clearly shown by the Graphite and #9GXE's "cheating". Can't they just admit that their benchmark is to easy to optimize for and/or cheat on? WinTach is much harder to beat... 2. The big "cheat" that Hercules/IIT used was overlappipping BitBlit and PolyLine optimization, and Hercules sent them a new driver which didn't do this -- but produced almost identical scores. Yet, the only thing PC Magazine says is that scores are not "legitimate" -- couldn't they at least make some comment about its real-world performance? I'm not so much going by WinBench for performance, but, rather, by Steve Gibson's results, which are more real-world based . If you believe Gibson, that is ... :) He writes: "Despite these documented cheats, I have to say that in real-world applications the Hercules Graphite adapter actually draws faster than any other display adapter in the industry. [...] Even though it's just a modest ISA bus card, it outperformed every local bus adapter I have, including the Stealth 24 VLB, the Fahrenheit 1280VA/VLB, the ATI VLB Mach32 and even the Weitek P9000-based Diamond Viper VLB." This kind of praise is enough for me to be interested in it, bogus WinBench or not! :) > When and if you get one send me mail.. I might buy that ATI GU+ off > you.. 9-) I already returned the ATI GU+. My dealer had sold eight of them, and seven were returned to him. I'm now back to running an original ATI GU, until I get my Graphite. And, yes, the GU is faster in my 16 MB system than the GU+, especially in bitmap handling . Hercules has a promotion available for VARs and software developers: you can buy one Graphite or Graphite VLB for 50% off list to try it out. At just $199 for Graphite or $249 for the VLB version I decided it was worth trying . I'll post my impressions when I get it... -- [ /tom haapanen -- -- software metrics inc -- waterloo, ont ] [ "stick your index fingers into both corners of your mouth. now pull ] [ up. that's how the corrado makes you feel." -- car, january '93 ]
comp.os.ms-windows.misc
Re: WANTED: Info on Asymetrix/Toolbook Organization: University of Passau - Germany Lines: 30 NNTP-Posting-Host: pc5.rz.uni-passau.de In article <> writes: >Does anyone know the phone and fax number of the Asymetrix >Corporation. I am also interested in their e-mail address. >I would also like to know what the current status of their product Toolbook >is. I received the last update 1.5 about 1.5 year ago. Are their any new >developments or is Toolbook slowly dying? >Regards, >Rob de Winter. >-- >*** Nothing beats skiing, if you want to have real fun during holidays. *** >*** Rob de Winter Philips Research, IST/IT, Building WL-1 *** >*** P.O. Box 80000, 5600 JA Eindhoven. The Netherlands *** >*** Tel: +31 40 743621 E-mail: *** Rob, their e-mail adress is I've heard V.2.0 is in beta. have a look at bitserv.list.toolb-l - which is a toolbook list. Regards, Olaf Winkelhake
comp.os.ms-windows.misc
Re: Simple Windows question Organization: AT&T Lines: 15 In article <> writes: >When running DOS 5.0 under Windows 3.0, I lose the ability to do a >print-screen. >I have no problem with this when I'm running DOS not under Windows. ... Open up the .PIF file with the PIF Editor, click on the "Advanced" button, and then reserve the PrtSc key for the application. Any keys that you select in this section will be passed along to the application rather than being processed by Windows. -- Bob Nichols AT&T Bell Laboratories
comp.os.ms-windows.misc
Re: moving icons Nntp-Posting-Host: epistat.med.miami.edu Organization: University Of Miami, Medical School Lines: 17 writes: >I remember reading about a program that made windows icons run away >from the mouse as it moved near them. Does anyone know the name >of this program and the ftp location As I remember it, the name of the program your looking for is called icofrite. Cica was where I saw it last. It was quite a while ago. ********************************************* Richard Calderon: * University of Miami School of Medicine * Information Systems Computing * 1029 NW 15 St. * Miami, Florida 33136 * *********************************************
comp.os.ms-windows.misc
Changing system fonts Nntp-Posting-Host: ravel.udel.edu Organization: University of Delaware Lines: 18 I would like to change all of the system fonts in windows... I have a program that will generate system fonts from truetype, but i was wondering if there is a problem to help you set up all your system fonts. Also, how do i change the icon text color... all of my icon text is black, and i want to change it... couldn't find any options in control panel or in win.ini brad cain -- **************************************************************************** Brad Cain N3NAF University of Delaware Electrical Engineering "Blah, blah, blah" alt.blah
comp.os.ms-windows.misc
How do I quickly switch between Windows screen resolutions? Organization: AT&T Bell Labs, Columbus, Ohio Distribution: na Nntp-Posting-Host: slgsun.cb.att.com Lines: 18 Can someone out there tell me how to switch Window's screen resolution quickly and easily? I know that I can go back into install to do it, but what I'd really like is to have is the ability to just change a couple of startup or configuration files and have the resolution changed. I already have both video drivers that I need on my system, so that isn't a problem. Thanks, Sean. --- Sean L. Gilley <-- USE THIS ADDRESS, ALL OTHERS BOUNCE! 614 236 5031 , 614 860 5743
comp.os.ms-windows.misc
Re: multiple desktops Nntp-Posting-Host: eugene.convex.com Organization: CONVEX Computer Corporation, Richardson, Tx., USA X-Disclaimer: This message was written by a user at CONVEX Computer Corp. The opinions expressed are those of the user and not necessarily those of CONVEX. Lines: 22 In article <> writes: > >Is there a free/share package that will allow multiple >desktops in windows 3.1. What is desired is to have a desk top >for several people that each can personalize by name and choice >of programs etc. There's a package called Workspace on cica that has 5 desktops; I haven't done much with it yet, but it seems to be able to do what you want it to. Don't have the exact archive name handy, but it's something like wspace<blah>.zip. Tom -- I speak only for myself. ----------------------------------------------------------------------------- "Peace is the name of the ideal we have deduced from the fact that there have been pauses between wars." Jerry Pournelle in "The Mercenary"
comp.os.ms-windows.misc
Character Codes Problems Reply-To: Nntp-Posting-Host: sbb1.empros.com Organization: Empros Power Systems Control, a division of Siemens EA Lines: 15 Help! I am working on a project that involves using text with foreign language characters . I have been manipulating the data with Excell 4.0 and then exporting the data as comma seperated variable files to an RS6000 workstation. The Norwegian characters show up fine under Windows, but appear as "funny" characters on the workstation. The workstation is setup for national language support and we have problem entering the Norwegian characters from the workstation keyboard. On further investigation I found that the character codes used by Windows are different than those specified by the MSDOS code page. The MSDOS codes seem to be the same as the workstation. What gives, and how can get around it. Please reply by E-mail as I will be out of the office the next few days and will not be reading the news. Thanks.
comp.os.ms-windows.misc
How to hold the control to a window object? Keywords: ObjectWindows, MS-Windows, SDK Nntp-Posting-Host: maccs.dcss.mcmaster.ca Organization: Department of Computer Science, McMaster University Distribution: comp.os.ms-windows.misc comp.windows.ms Lines: 30 //I'm using BC++'s ObjectWindows and trying to get some data //processed in a window object. However, when the calling program invokes //the window object, it gives up the control to the window object, and keeps //executing the next statement. I would like the calling program, after //invoking the window object, to wait until the window object is closed. //Can I do that? My program may look like: class MyWindow : public TWindow { ... }; void MyCallingProg // Could the calling program be a C function? { ... MyWindow *MyWinObj; MyWinObj = new MyWindow; GetApplication->MakeWindow; MyWinObj->Show; next statement; // I want the program to wait here until MyWinObj ... // is closed so that I can get some data back from ... // MyWinObj. I specified the window style to be ... // WS_POPUPWINDOW, didn't help. Is there any other way ... // to execute the window object so that the calling ... // program won't give up the control? Any help would } // be appreciated. Thanks. -- Jun To talk to the Lord with PS/2 through MS-Windows
comp.os.ms-windows.misc
Anyone use Number 9 GXE video card? Summary: Anyone use Number 9 GXE video card? Keywords: Video adaptor hardware graphics Distribution: world Organization: NCR Corp., Network Products - San Diego Lines: 5 Has anyone used the Number Nine Video Graphics adaptor with Windows or Windows NT? What do you think??? 2 -- C --
comp.os.ms-windows.misc
MONOUMB.386 Organization: Prairie Storm International, Lockport, MB., Canada Lines: 10 Does anyone know where the program MONOUMB.386 is available .. I have checked my Windows system disks and MONOUMB2.386 is there but not the other one.. Thanks.. Stan Kucera -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
comp.os.ms-windows.misc
Re: Canon BJ200 and HP DeskJet 500... Summary: there are so many refill kits now ... Organization: Jeff's house of computer pieces Lines: 18 >@nd.edu wrote: >: The key issue that I bought my BJ-200 on was ink drying speed. I was at the Trenton Computer Fest and there were many sources of ink refills for the HP and Canon, so if you don't like the ink you're using, you have a choice. There is a Frequently Asked Question list that's reposted occasionally that reports how to refill the cartridges yourself with inks that are available from the stationery store instead of a "specialty" ink with the specialty price. I'm not sure, but I think I found another legal source of cheap hypos for injecting ink into the cartridges. More on that when my mail order succeeds. -- Jeffrey Jonas
comp.os.ms-windows.misc
Canon buble jet printer? Organization: Lehigh University Lines: 12 Hi, Can somebody tell me how much is Canon BJ200? And from where can I buy it for the cheapest price? Thanks in advance.. -- ____________________________________________________________________________ **************************************************************************** _m_ _ 0___ \ _/\__ |/ ////// \ /| | | /-_-|_--_|--/ o | 0 0 | o
comp.os.ms-windows.misc
Need help setting PIF for games Summary: Can't seem to get the settings right for a few things Keywords: WINDOWS PIF Organization: VERSYSS Incorporated, Westwood MA Lines: 29 HI there! I have a few games that I'd like to run under Windows 3.1 and can't get the PIFS adjusted right. For example Wing Commander. In my DOS Prompt, I have more than 620K available for programs. This is enough to run WC. So I build a PIF giving WC a couple of megs of extended memory etc.. and run it. WC prompts: "Loading Wing Commander..." and then a message about "Using extended memory..." etc... and then my screen goes black I also have a pool game that does almost the same thing. It opens up and prompts me for what kind of video driver I have. I respond EGA and the screen goes black. On both of these a ctrl-alt-del getss me back to Windows. Has ANYONE run Wing Commander under Windows? Or has had the problems I describe and fixed them? HEre's the rest of my setup: 400MB Disk Free 8MB memory ~5 free during WIN session 386DX-25 Respond here or on E-Mail. If anyone else needs this info, send me mail in a couple of days, and I'll forward the replies to you. -- ----------------------------------------------------------------------------- Clinton A. Pierce | Cartesian Bear = Polar Bear after coordinate transform | ------------------------------------------------------------------------------
comp.os.ms-windows.misc
Re: X Windows for windows Organization: LESC/NASA/LaRC Lines: 11 Distribution: world Reply-To: NNTP-Posting-Host: antares.larc.nasa.gov PC-Xview from NCD, HCL-eXceed from Hummingbird Software! ================================================================ _| _/ _/ _/_/_/ _| All opinions expressed are _| _| _/ _/ _/ _| my own because nobody else _| _| _/ _/ _/_/_/ _| wants them! _| _| _/ _/ _/ _/ _/ _| _| _| _/_/_/ _/_/_/ _/_/_/ _| Jon L. Sweet _| ================================================================
comp.os.ms-windows.misc
WINNLS.DLL? Organization: UNIVERSITY OF MASSACHUSETTS - AMHERST Lines: 7 Distribution: world NNTP-Posting-Host: deimos.ucs.umass.edu X-News-Reader: VMS NEWS 1.24 I tried to install a foreign language Windows application that required a file named WINNLS.DLL. I checked all of my WIndows 3.1 installation disks for this file, but could not find it. Does anybody have any idea what this file is for and where one could get it from?
comp.os.ms-windows.misc
Re: Help with WinQVT Reply-To: Organization: Inst. f. Anaesthesiologie der LMU, Muenchen Distribution: lrz Lines: 63 writes: > when I use a name such as rosevc.rose-hulman.edu > Initiating nameserver query for 'rosevc' > nameserver query time out > when I use the IP number > Local host or gateway not responding >I know the nameserver is correct and the router is correct. They work >fine using NCSA telnet/ftp. They are working ok, but your definitions in QVTNET.INI and QVTHOST.RC are incorrect . >The docs said if you are running concurrent packet software you need to >load PKTMUX??? Does this apply to me??? No, I don't think so. You are using QVTNET and NOVELL concurrently, aren't you? They use different packet types, so QVTNET and NOVELL should be able to coexist just fine. PKTMUX is required if you are using different TCP/IP-Packages concurrently. >This is the qvthost.rc file. >137.112.5.2 >137.112.199.50 There is the first problem: You didn't specify hostnames, just IP-Addresses. Your file should look like this: 137.112.5.2 <Name of your Nameserver> 137.112.199.50 <Name of your Router> >This is the beginning of the winqvt.ini file. >[net] >name=swartzjh.test.rose-hulman.edu Here you should only specify your hostname, without the domain part. >router=137.112.199.50 Instead, use router=<Name of your Router>, as specified in your QVTHOST.RC I know the release notes for 3.31 say that IP addresses should work also, but apparently they don't. >nameserver=137.112.5.2 Here, too, you should use the hostname of the nameserver instead of the IP address. It worked fine for me that way, although I could not specify more than one nameserver. The relnotes say it should be possible to specify up to three nameservers, separated by commas, but it didn't work. Hope it helps, Richard -- +----------------------------+-------------------------------------------+ | Dr. Richard Spitz | INTERNET: | | EDV-Gruppe Anaesthesie | Tel : +49-89-7095-3421 | | Klinikum Grosshadern | FAX : +49-89-7095-8886 | | Munich, Germany | | +----------------------------+-------------------------------------------+
comp.os.ms-windows.misc
Subject: ==> MS Windows Sound System, Text to Speach? Organization: BC Systems Corporation Nntp-Posting-Host: bcsc02.gov.bc.ca Lines: 4 Hi all News Group users: Does anyone know whether there is some software which will let one do Text to Speach like the Sound Blaster does? Hal Adam,
comp.os.ms-windows.misc
Aaron Herskowitz <>For Sale: Borland C++ w/ Application Frameworks 3.1 Reply-To: Organization: Allegheny College [Please excuse me if this is inappropriate to post here, but I do not read these groups normally and I did not see any PC related marketplace newsgroups] FOR SALE: Borland C++ with Application Frameworks 3.1 Borland C++ Programming Package including unopened software, unopened manuals, and registration card. SOFTWARE INCLUDES: 1. *Still plastic wrapped* high density 5.25 inch disks for Borland C++: total of 18 diskettes in 2 individually wrapped packages, each disk has "Borland C++" and "BC++ & APP. FRAMEWORKS 3.1" on label 2. Amish System Utilities for Windows : Amish Launch Amish Desk Utilities for Windows 3. Phar Lap's 286|DOS-Extender Lite Version 2.5 MANUALS INCLUDE: 1. *Still Plastic Wrapped* Manuals include : A. Boland Windows API Volumes: I: Reference Guide II: Reference Guide III: Windows 3.1 Reference Guide B. Borland Turbo Debugger 3.0 User's Guide C. Borland Turbo Profiler 3.0 User's Guide D. Borland Turbo Assembler 3.0 Users Guide E. Borland C++ 3.1 User's Guide: integrated environment optimization command line compiler installation F. Borland C++ 3.1 Programmer's Guide: language structure, class libraries, advanced prgramming techniques, anci c implementaion G. Borland C++ 3.1 Library Reference: runtime library, global variables, cross-reference H. Borland C++ 3.1 Tools and Utilities Guide: error messages, winsightm make, help/resource compilers, tlink I. Borland Object Windows for C++ User's Guide: tutorials, class reference 2. Opened Manuals include: A. Borland Turbo Assembler 3.0 Quick Reference Guide B. Borland Turbo Vision for C++ User's Guide C. Borland Resource Workshop User's Guide This package was purchased by a former employee of my father's and my father has asked me to try and sell it since neither of us have any use for it. Retails for $749, most software houses have it for approx. $480. I am asking $400. If you are interested, please e-mail me directly because I do not normally read this newsgroup. -- Aaron Herskowitz [] Allegheny College, Meadville, Pennsylvania
comp.os.ms-windows.misc
Re: Utility for updating Win.ini and system.ini Organization: University of Tromsoe, Norway Lines: 11 Sorry, I did`nt tell exactly what I need. I need a utility for automatic updating of *.ini files for Windows. The program should run from Dos batchfile or the program run a script under Windows. I will use the utility for updating the win.ini on meny PC`s. Do I find it on any FTP host? Svein
comp.os.ms-windows.misc
Re: Using Microsoft Foundation Classes with Borland C++ 3.1 Organization: SPSS, Inc. Distribution: usa Lines: 53 In article <1qv1rc$>, writes: > Hi all, > > has anybody tried to compile CTRLTEST from the MFC/SAMPLES directory, > after compiling the MFC-libs with BWC ? > > Seems to me, that BWC isn't able to distinguish pointers to overloaded > functions. > For example, imagine the following 2 functions: > void same_name > void same_name > > After trying the whole day, I think, with BWC its impossible to take the > adress of one of the above two functions and assign it to a properly defined > function pointer. > Am I right ? Has anybody else had this problem ? > > thanx I think you may be chasing the wrong problem. I don't think it is the function overloading at all-- I do that sort of thing all of the time in BC++ without a hitch. The big problems I have encountered in porting MFC to BC++ is that fact that MFC _depends_ on a couple of invalid C++ assumptions. I have never gotten the _entire_ ctrltest app to run under BC++, but the reason is that MS makes some bad assumptions about the order in which static/global objects are initialized . The problem is in the owner-draw menu code somewhere-- if you comment out that section, all other pieces of ctrltest work fine. Two other major gotchas I have found using MFC under BC++: - The CFile::OpenFlags enum uses hard-coded numbers for the open mode, rather than the manifest constants defined in fcntrl.h . - All of the MFC collection classes depend on another bad C++ assumption-- that a reference to a base object can used be in place of a reference to a derived object . I am sure there are other problems along the same lines, but I have not encountered them . I have not seen MFC 2.0 yet, but I hope that some of these will be addressed. If they are not, all of MS's hype about portability to other vendor's compilers will be just that. -- If these were my employer's opinions, I wouldn't be posting them. ############################################################################### "Whoever said nothing lasts forever was obviously # R. Brendler NOT a Cubs fan..." - Mike Royko # SPSS, Inc. - Chicago IL
comp.os.ms-windows.misc
Wanted sample source for editing controls Organization: Olivetti ATC; Cupertino CA, USA Lines: 18 Distribution: usa NNTP-Posting-Host: todi.oas.olivetti.com Hi Everyone, I would like to get an example program to get started with a simple editor . Can someone point me to a source such as a programming windows book, or example program comes with Windows SDK . I would greatly appreciate it. All I want to do is to be able to place a edit control or combobox or a listbox on a window and be able to drag and resize. If anyone has written similar program and don't mind sharing code or ideas, I would appreciate it very much. Thnx in advance, Manu Das Please send me directly at
comp.os.ms-windows.misc
Re: EMM386.EXE and Windows and Dos6 Organization: Case Western Reserve University, Cleveland, OH Lines: 37 Reply-To: NNTP-Posting-Host: hela.ins.cwru.edu In a previous article, says: >In Windows I created a permanent Swap-file of 7771Kb as win3.1 >recommended me to do that . >If I use EMM386.EXE, after win3.1 startup I have 6689K of memory >free, if I leave EMM386.EXE out of my config.sys I have 9935K >of memory free, and windows recommends me a swap file of 11769K. > I think you need the EMM386.EXE noems This will let the expanded mem be active but not use any, therefore this will give you more extended mem for windows yet have all the bases covered. >I use DOS6, with memmaker, have 4MB of internal Memory and a 486DX, > I do not use dos6 so I am not familiar with this. >Does anybody knows why this is happening > >I need an optimized DOS-environment, because i develop applications for >DOS using a windows programming environment. > > >Rudi > c-ya..... /\/\artin -- This communication is sent by /\/\artin University of Arizona Tucson ========================================================================= DEATH HAS BEEN DEAD FOR ABOUT 2,000 YEARS ****** FOLLOW THE KING OF KINGS
comp.os.ms-windows.misc
Organization: Arizona State University James Cassidy <> Norton Desktop Smartcan vs. Norton Util's EP Lines: 22 I just purchased The Norton Desktop for windows, and I also have Norton Utilities. When I installed NDW, it wanted to rem out the line that installed EP and the command to invoke the Image utility. It replaced the Image command with a new image command that invokes the version of Image that came with NDW. This makes sense, as presumably the Image version with NDW is newer than the one with NU. It did not, however, install smartcan in the autoexec. Now two questions: 1: Will NU use the image data saved by the newer version of image invoked. i.e. Are the two version of Image compatable? 2: Will erase protect use the info from smartcan, and vice versa? I use both dos and windows, and I want to make sure that when I erase files in either environment, they are going to be protected. From the experiments I have run, The two programs don't use each others info. I currently have both EP and smartcan loading within my autoexec, and I don't see any conflicts; FYI : Norton Desktop for Windows version 2.2 Norton Util's version 6 Thanks for any help.
comp.os.ms-windows.misc
Re: W4WG & Novell Organization: Malaspina College Lines: 29 In article <>, writes: > In article <1rh2mi$>, writes: > >> If I put LASTDRIVE = Z in my config.sys, NETX will run but I can't access >> drive f: to log in to Novell. >> If I don't put LASTDRIVE = Z in my config.sys I can't access other W4WG >> drives from the file-manager. >> >> It seems that there should be a way to make NETX work with the LASTDRIVE = >> statement in my Config.Sys. > > First off, I haven't used W4WG . > > The problem is the LASTDRIVE command and the way NetWare in general adds drives to the device chain. > Setting LASTDRIVE=Z means there are no "unassigned" drive letters for NetWare to use, as it tacks its drive > mappings -onto the end- of the existing list of drives. W4WG obviously > attaches its network drives to "existing, unused" drive letters. > > I'd guess the next thing I'd try is something like LASTDRIVE=M, which on > most machines will leave a fair swathe of drives for W4WG and still > allow up to 13 NetWare drive mappings as well. W4WG requires DOS drives. I use LASTDRIVE=J which makes my first Novell drive K and leaves me drives G, H, I and J for W4WG. My local DOS drives use A-F. Ron
comp.os.ms-windows.misc
Data corruption Organization: Kansas State University Lines: 31 NNTP-Posting-Host: matt.ksu.ksu.edu I quit windows normally to run a special DOS app, got done with it and tried to start windows. Ok got the title screen, Windows background, DOS with an error about loading PROGMAN.EXE. Hum, yep PROGMAN.EXE is still there. Must be bad, ok pull off PROGMAN.EXE from a backup tape, start windows, get the windows title screen, windows background, DOS with the same error. HUM! Fire up the good ol' Norton Disk Doctor, test, 500 lost clusters! Ok, fix them, and look through them, doesn't look important. Remove the Windows directory, and reinstall from disks. Fire up windows, title screen, background, Program Manager, Success! I have a 486/50 with 4 meg of RAM, 120 meg HD, SVGA, running under DOS 5.0, no special memory managers or stuff, just the basic Windows 3.1 A 12 meg permanent swap file using 32-bit Access. I mainly use Windows to run more that one DOS app at a time. I've noticed that since I started using Windows a few months ago, lost clusters have gotten more and more common. Although I don't like having data just disappear, it really haven't been a problem except for today. Has anyone else had any problems with lost clusters while running windows? And what could I do to fix the problem, I'd sleep better knowing Amy wasn't loosing her marbles. :) Steven -- Steven Marcotte
comp.os.ms-windows.misc
Re: AMI Pro 3.0 and equation mode Nntp-Posting-Host: fido.colorado.edu Organization: University of Colorado, Boulder Lines: 37 writes: >Hi, > I'm having a problem with AMIPro when writing equations. If the >equation extends past a certain point on a line, the whole thing disappears. >If I then try to delete the equation or cursor beyond the equation, AMI >goes nuts. The line counter at the bottom of the screen increments >repeatedly and the only way out is to CTRL-ATL-DEL. If I have been >unfortunate enough to save a document with one of these screwed up >equations, the document is basically trashed. > Has anyone else experienced this? Does Lotus know about it >and or have a patch???????. >Thanks in advance, >Kurt > I contacted Lotus about this problem today. It has been reported previously and there is a fix. Apparantly the problem only occurs when TAB characters are used immediately preceding the equation frame. The work around when equations are expected to touch the right margin is to delete at least one preceding TAB and use SPACE to align the frame . Unforutnately, once the page run-on has occured you are hosed. So the moral of the story is use only SPACE characters to align equation frames. Hope this helps the rest of you who have already contacted me with this problem. Kurt
comp.os.ms-windows.misc
Re: X-emulator Organization: University of Pennsylvania Lines: 12 Nntp-Posting-Host: compstat.wharton.upenn.edu A posting in another news group I read a while ago said that PC-Xview and PC-Xremote allow you to use Xterm. Call NCD @ 503-641-2200 for more info. Hope it helps, -Hao -- --------------------------------------------------------------------- Hao Zhang, Dept. of Stat., Wharton School, Univ. of Penn. ---------------------------------------------------------------------
comp.os.ms-windows.misc
Subject: Re: Windows for WorkGroups and LAN Workplace Distribution: comp.os.ms-windows.apps,comp.os.ms-windows.misc,world Organization: University of Wyoming Nntp-Posting-Host: sheriff.uwyo.edu Lines: 18 >Hey, sounds great. Does that mean that W4WG works with ODI? I thought it >uses NDIS. WFWG does use NDIS but it cooperates well with the NDIS shim for ODI. > >My problem is that Lan Workplace with all its drivers uses up most of my >UMBs, so I'd hate to have to load many more drivers to make W4WG work >along. The additional TSR load is minimal. I think I eat another 20K total. This is worth it to me since it allows me to get to my Windows NT box. Novell hasn't released a decent NT Novell client yet so I share through my WFWG box. This solution is very usable.
comp.os.ms-windows.misc
Subject: Black Screen of Death, Windows, Novell Organization: Miami University Academic Computer Service" Lines: 23 Hi there, We are running a 120 node Token ring with Windows 3.1 and Novell 3.11. Every once in a while, we run into "The Black Screen of Death", a phrase coined by Robert X. Cringely in a recent InfoWorld column. Basically, sometimes when you quit Windows, the screen goes black and you get a nice little flashing cursor in the top left corner of your screen. Also, sometimes when you exit to DOS, the same effect occurs. Cringely hints that Microsoft and/or Novell has a patch for Windows' virtual interrupt controller that may solve this. Neither company seems to know what I am talking about when I call them. Has anyone else noticed this phenomenon? Is there a fix for it? Any response is welcome. Peter Sweeney
comp.os.ms-windows.misc
Re: PC/Geos, Windows, OS/2, and Unix/X11 Organization: Kernel Hackers 'r' Us Lines: 22 NNTP-Posting-Host: eden.cs.berkeley.edu In-reply-to: 's message of Tue, 6 Apr 1993 11:41:36 GMT In article <> writes: =>There is a free unix, linux, that has cc, ~c++, fortran , =>Xwindows and many other features besides, with a large number of utilities =>that can be optionally added. And there is also a free 386BSD I believe. =>Both these unix's are quite robust. You can check out comp.os.linux i dunno about linux, but for 386bsd, don't forget networking , NFS, a fast, incredibly stable filesystem, and the list goes on... 8-) for us 386bsd folk, look in comp.os.386bsd.*. chris moderator of comp.os.386bsd.announce, anti-politician, and sometime evangelist -- Chris G. Demetriou "386bsd as depth first search: whenever you go to fix something you find that 3 more things are actually broken." -- Adam Glass
comp.os.ms-windows.misc
Re: Workspace Manager for Win 3.1 ? Organization: University of Canberra Lines: 26 In article <1r5uml$> writes: >Are there any Workspace Managers out there for Windows 3.1 ? Try WorkShift by Karl Thoreddson. The latest version is 2.0 but the following is at Cica in the Desktop directory. WRKSFT16 ZIP : WorkShift Graphical Virtual Desktop Or email Karl and ask him to put version 2.0 up Karl's email: I was Beta tester for WorkShift and must say it is very good . It'll even remember your WorkShifts between Windows sessions. >Thanks in advance. Your Welcome. ~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~ o | Paul Blackman o | Water Research Centre, o _ | Faculty of Applied Science -- o | University of Canberra, Australia. \_|_-- |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | "Spend a little love and get high" _/ \_ | - Lenny Kravitz ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
comp.os.ms-windows.misc
Info on Books on BIOS, 286 etc. Organization: Rutgers Univ., New Brunswick, N.J. Lines: 18 Hi Everybody, I am interested in the following topics. 1)BIOS programming on 286 and 386. 2)Memory management in 286 and 386. 3)Developing Visual Basic Custom Controls. I would like to have your valuable opinion on the books that are best in the above topics. Please send a mail to . I will post a summary of the suggestions. 2**32-1 thanks in advance. -Rahul Mehta
comp.os.ms-windows.misc
Re: Wallpaper in Windows 3.1 Organization: University of Joensuu Lines: 23 writes: >>Is there any utility available that will make Windows >>randomly select one of your windows directory's .BMP >>files as the wallpaper file? >There are a couple. I am personally using screenpeace, which is a If you need just to change the wallpaper, then I've written a short program in VB that does this by using SystemParametersInfo-function. The bad news is that you need VBRUN200.DLL to run it, and the DLL is some 350kb . The order of pictures depends on the system date and the number of BMP-files in the directory, so the picture remains the same if you execute the program multiple times during the same day and the number of BMPs has not changed. If you feel this is what you need then I could uuencode it and email it to you. -- +--------------------------------------------------------------+ | Ismo K{rkk{inen / / | | Ph'nglui mglw'nafh Cthulhu R'lyeh wgah'nagl fhtagn! | +--------------------------------------------------------------+
comp.os.ms-windows.misc
Need help with WordPerfect for Windows... Distribution: usa Organization: Milwaukee School Of Engineering, Milwaukee, WI USA Lines: 19 I have two questions: 1) I have been having troubles with my Wordperfect for Windows. When I try to select and change fonts, etc. some of the text disappears. I tried to center two lines once, and the second line disappeared. I can not find the error, and I do not know how to correct it. 2) Is this the right newsgroup? Where should I go? E-mail prefered... _____ Who else is still waiting for "Naked Gun Part | | " ''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/ '/''/'Nathan'Narloch''/''/''/'""/''/''/''/' /''/''/''/''/''or'/'""'/''/'' ''/''/Milw,/WI/53207/''/'"Join'the'Official'Psycho/Team..."/''/''/ '/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/''/'
comp.os.ms-windows.misc
Re: Mouse on Com3OM3 or COM4 in Windows Organization: Cloud Nine BBS, Melbourne, Australia. Lines: 53 writes: > I am having a problem configuring the mouse in windows to use COM3 > with IRQ5. I don't believe IRQ5 is the problem. I tried a mouse on COM3, IRQ4 and it still did not like it. Simply, Windows seems to only support mice on COM1 or COM2. The funny part is, though, that Microsoft's own mouse driver was quite happy with my mouse sitting on COM3. Why can't Windows use the mouse driver, or at least support COM3? :-) > COM2Irq=3 > COM3Irq=5 > COM4Irq=7 > MaxComPort=4 I've tried this too. Actually, I wanted to be able to use my second modem from Windows. It still will not talk to that modem. I created two profiles, AMSTRAD and MAESTRO . It will not talk to the Maestro at all. > that their driver does not support COM3 and COM4 in windows. > Their suggestion was that the 'MicroSoft or PS/2' setting in windows > setup would work. It does not. Nor here. . > I can not believe that it is not possible. At worst, you would need a special > version of 'a' mouse driver that looked at COM3 and COM4 instead of COM1 > and COM2. I know that IRQ5 and IRQ7 are normally printer port IRQs, but I I've seen nothing like that. I've experimented with Logitech's mouse driver too, with no sucess. > have no printers attached. A side note is that I would really like to assign > COM4 to some higher IRQ, because my SoundBlaster board uses IRQ7 , but no modem that I know of allows settings other than > IRQs 2,3,4,5, and 7. If you have a SoundBlaster Pro, it should support IRQ10 as well. Finally, a board that supports IRQs >9. The only one I have . hamish Hamish Moffatt, APANA: The Australian Public Cloud Nine BBS, 3:635/ Access Network Association. Melbourne Australia 58:4100/ Mail Titanic Software. Voice: +61-3-803-1326 for information.
comp.os.ms-windows.misc
ATM Organization: University of California at San Diego Lines: 15 Distribution: world NNTP-Posting-Host: weber.ucsd.edu I've been reading, with much confusion, about whether or not to use ATManager. Lately, all the packages I've been buying have all included ATManager as a "bonus" I do some desktop publishing using PageMaker and Coreldraw. Coreldraw comes with a nifty laser disk that contains over 200 diff types. Add that to the TTfonts that come with win31 and you have a decent amount of fonts. I print my creations out on an HP4 Postcript, at 600 dpi resolution with the "Resolution Enhancement Technology" and .. well ... I get some darn good copies. So good that there isn't any diff whether or not ATManager is turned on or not. Is it worth it to run ATM at all? Especially with these better printer technologies ... and TT? -- -- avDean
comp.os.ms-windows.misc
Subject: What about SMARTDRV /DOUBLE_BUFFER? Organization: Miami University Academic Computer Service" Lines: 9 I am curious: what does the /double_buffer parameter in smartdrv actually do for me? I seem to have less problems in Windows when I leave it out. Using a PS/2 with an ESDI drive, but also a PS/2 with a SCSI. Any response is welcome. Peter Sweeney
comp.os.ms-windows.misc
For Sale: Harvard Graphics for Windows Keywords: Harvard Graphics, sale Organization: Xerox PARC Distribution: us Lines: 17 For Sale: Brand new, shrinkwrapped HARVARD GRAPHICS FOR WINDOWS List Price: $500 Cheapest pince in Computer Shopper : $315 My Price: $250 This is really a slick package, but I won it in a bike race so I can't return it for credit. My dilemma is your fire sale. -- ** Peter Tapscott, Xerox - Palo Alto Research Center ** Internet: XNS Net: Tapscott:PARC:Xerox ** 415 813-6885
comp.os.ms-windows.misc
exit codes (dos--sorry for wrong group : ( Organization: George Washington University Lines: 19 Hey now. First of all, sorry to post this DOS question in a WINDOWS group, but I'm in kinda a hurry, so I can't scramble to find the dos groups' names. Anyway, anyone know where I ccan find the exit codes to DOS commands? the manual doesn't seem to have all of them. I'm particularly looking for COPY, in order to make a "move" batch file, such that if the file wasn't coppied properly, it won't be deleted. please e'mail Thanks, I.A, Mickey -- pe-|| || MICHAEL PANAYIOTAKIS: ace|| || ...!uunet!seas.gwu.edu!louray |||| \/| *how do make a ms-windows .grp file reflect a HD directory??* \\\\ | "well I ain't always right, but I've never been wrong.."
comp.os.ms-windows.misc
?? DOS font size in windows?? Organization: NC State University Lines: 13 I have an 8514/A card, and I am using windows in 1024x768 mode . In the 386 enhanced mode the DOS window font is too small for my 14" monitor. Is there a way to spacify the font size for the DOS window? You'll have to excuse me if there is a trivial answer, since I am fairly new to MS Windows world. Thanks. ====== S. Alavi [] 467-7909 ======== 515-8063
comp.os.ms-windows.misc
WIn 3.0 ICON HELP PLEASE! Organization: University of Northern Iowa Lines: 10 I have win 3.0 and downloaded several icons and BMP's but I can't figure out how to change the "wallpaper" or use the icons. Any help would be appreciated. Thanx, -Brando PS Please E-mail me
comp.os.ms-windows.misc
Organization: University of Central Florida - Computer Services Mark Woodruff <>Why I'm not using Dos 6 anymore Lines: 18 I've been running Dos 6 for about a month. I was generally impressed with the improvements: the multiple boot configurations were great, the new commands were nice, and DoubleSpace worked fine . Until now. This morning at 4 am while I was working on my research paper, I had to reboot a hung Dos program from within Windows 3.1. When my machine finished rebooting, I found my windows directory and about two thirds of my other directories were irreversibly corrupted. I cannot afford problems like this. I'm returning to Dos 5. mark P.S. I've also noticed bad sector errors from DoubleSpace where none should exist.
comp.os.ms-windows.misc
Re: More Cool BMP files?? Organization: George Washington University Distribution: usa Lines: 27 > > >>BEGIN ----------------------- CUT HERE --------------- >>begin 666 ntreal.bmp >>M0DTV5P< #8$ H ( , %@" ! @ >>M $ ! @@P![; &N+L0 #UH BV > >Deleted a lot of stuff!!!!!!! >How do you convert this to a bit map??? You're supposed to delete everything above the "cut here" mark, and below the lower cut here mark, and uudecode it. but *I was not able to: unexpected end of file encountered at the last line. could you please re-post it, or tell be what I'm doing wrong? thanks,i.a., Mickey -- pe-|| || MICHAEL PANAYIOTAKIS: ace|| || ...!uunet!seas.gwu.edu!louray |||| \/| *how do make a ms-windows .grp file reflect a HD directory??* \\\\ | "well I ain't always right, but I've never been wrong.."
comp.os.ms-windows.misc
Turbo C++ Visual Edition adn request was Re: absolute newbie questions... Organization: KIT Iizuka, AI Dept, JAPAN. Lines: 52 NNTP-Posting-Host: mickey In-reply-to: 's message of Fri, 16 Apr 1993 06:16:54 GMT In article <> writes: >BTW, how would you rate the new "Borland Turbo C++ Visual Edition for >Windows," anyone? Time for a new discussion, maybe ? I asked in these groups some time ago what about the TC++/VE, and got no answers, so I decided to try. My brother who lives in the US bought and sent it to me, and I'm still trying to get used to it. Before I put my good/bad points list, consider I am a Turbo Pascal/DOS programmer, and sometimes try to make something in Unix with C . I used to make some programs in Microsoft C version 5 because we used some third-party libraries that required that. - I like Borland. It seems to me much more easier to use than Microsoft, specially the debugger. I tried to learn Codeview sometimes, but never felt confortable with it. - TC++ V/E seems very nice to create simple apps, like the examples on the ObjectWindows book. So far, no problems. Lets see next week or so, when I will try something more complex. - It works nice even in my "weak" machine 386/16Mhz, 6 Mb Ram. But..... - The manual for the Resource Workshop seems to be from a different version from the Workshop itself. Some of the windows that appear on the manual have more itens than in the manual. - I think I will run into trouble since I got this TC++/VE from my brother as a present. I didnt wanted to buy the Japanese version because 1) I suspect that the manuals will be in Japanese :- I believe it will be far more expensive here. So he bought it as a present and sent to me, I send the registration card to the Japanese branch of Borland, but... who knows. So, I'd like to ask some questions for you all; - I know that there are some Microsoft guys around here in this group. Is there anybody from Borland ? Is there any e-mail address that we can contact the technical support ? Not for stupid questions, but to ask for example, why the RW manual seems to be different from the RW itself ? - Is there anybody else using it around here ? - Will the book of Petzold be useful for me ? I intend to use RW and ProtoGen to make the interfaces and then work on the code itself. Answers to my e-mail or comp.os.ms-windows.programmer.tools, please. Thanks in advance, Rafael.
comp.os.ms-windows.misc
Re: Canon BJ200 and HP DeskJet 500... Organization: Hewlett-Packard VCD X-Newsreader: Tin 1.1 PL5 Lines: 26 Justin Whitton wrote: : In article <> writes: : : @nd.edu wrote: : : I think the ink now used in the DeskJet family is water-fast. : : I've had pictures ruined by a few drops of rain. These were colour pictures : from a DeskJet 500C. Mind you, it could have been acid rain:-) The black ink is waterfast, but the color isn't : : I use a BJ10ex. Ink dries fast, but it really doesn't like getting wet. : : -- : /-----------------------------------------------------------------------------\ : |Justin Whitton at ma90jjw% |Where no man has gone before..| : |after August mail \------------------------------| : |Disclaimer: My opinions count for nothing, except when the office is empty. | : |I'm a student => intelligence = 0. | : \-----------------------------------------------------------------------------/ Bob Taylor HP Vancouver
comp.os.ms-windows.misc
Re: Permanaent Swap File with DOS 6.0 dbldisk Distribution: git Organization: Georgia Institute of Technology Lines: 58 In comp.os.ms-windows.misc you write: >While reading through the DOS 6.0 book, it states that the Windows permanaent swap file will not work correctly when placed on a compressed drive. To make things compatable, >I removed my Permanent swap file before starting the upgrade. However, when all the dust settled, and I go into windows, it says that the temporary swap file is right where it always was, in the Windows directory. My question is: How come the temporary swap files works OK with a compressed drive, and the permanent one doesn't? you might want to look in windows FAQ for this one, but here is my best explanation. But I can't guarantee that I'm not way off base... The permenant swap file is read/written to by windows by talking directly to the hard disk controller card. The controller card must use the protocal set up by western digital . Windows creates a file called spart.par in your windows directory that points to that file. It then uses the physical information about your disk to index to information in that file. compressed disks are actually "logical" disks. These disks have different characteristics than the actual physical disk. Furthermore, the information on the compressed disks must be uncompressed before it is used. . Because of this "inbetween" program, windows cannot use direct methods to read from the "logical" disk. a permenant swap file is only there to "reserve" an area of the disk that windows can use and to block that space from DOS. Windows would theoretically not even have to access the file from DOS to use that disk space. a temporary swap file is just a normal DOS file that is accessed by windows via DOS and the BIOS. If a disk compression program or other TSR is loaded the file access must go through DOS...TSR'S ...and BIOS in order to be access. more on permenent swap files... i'm sure everyone who has an uncompressed part of their compressed hard disk has seen the message "you have selected a swap file greater than the suggested size...windows will only use the size suggested...do you wan't to create this swap file anyway" or something like that. well, a friend of mine called microsoft and asked them what and why. what they said is that windows checks the amount of free disk space and divides that number by 2. Then it checks for the largest contiguous block of free disk space. Windows then suggests the smaller of the two numbers. They also said that under absolutely no circumstances...NONE!...will windows uses a swap file larger than the suggested size. Well...that's what he said! I call bull@#$#. If this is true why does windows report the memory is available to me if it's not going to use it? any takers? James
comp.os.ms-windows.misc
RE: Need Windows-logo Organization: Clark University Lines: 46 In a previous article, wrote: >In article <1qjqed$>, writes: >> Markus Maier wrote: >> : Hi, >> >> : Well I'm searching for the Ms-Windows logo, u know the picture when u >> : start Windows, in some suitable grafics-format, like gif or jpg,... >> >> C:\windows\system\vgalogo.rle. If my memory serves me correctly, >> *.rle is a compressed *.bmp format. >> > An is readable by WinGif, Paintshop Pro, Paint, and god knows how >many other programs. That isn't enough to change your Windows startup logo. vgalogo.rle is not needed after you have installed Windows. It is incorporated as a part of win.com. To make a new win.com, you have to concatinate three files together, using the /b option for a binary concatonation. I beleive it is copy /b win.cnf+vgalogo.lgo+vgalogo.rle mywin.com Make sure you backup your win.com file in anotehr directory before you do this -- I absent-mindedly typed win.com instead of mywin.com and had to resinstall Windows! Anyway, substitute whatever .RLE file you want. The win.cnf has the info needed to start Windows and vgalogo.vga has video information. Just make sure that the .RLE file doesn't tip the whole COM file size over the 64k limit of a .COM file! So anyway, I use mywin.com to startup MS Windows. Now instead of that annoying Micro$oft advertisment, I have the Joker taking yoru picture from the screen, saying "Smile!" Also a little bit of text: "Micro$oft Windows: The world's first commercially sucessful virus." I added that because of the frequency of crashes. <grin> Rob __ +------------------+ / \ -- --===--- | a post by | \__/ --------- | Rob Mohns | | rmohns@ | I had no water, so | vax.clarku.edu | I drowned in sand. +------------------+ | | \|/ | | __\\\|/____________|_______________\//___\\|_|/________\|/_________
comp.os.ms-windows.misc
Re: Any good sound formats conversion program out there?? Organization: University of California, Berkeley Lines: 34 NNTP-Posting-Host: uclink.berkeley.edu In article <> writes: >Hi all, > >Does anyone know if there is a good sound formats conversion program out > >there??? > >Please send me a copy of your reply!!! > >thanks a lot > >Bel > Hi... THe best sound conversion program I've ever seen is SoundTool, which is shareware from Germany. I found a copy somewhere in wuarchive.wustl.edu a long time ago, but I don't know offhand what directory it was under. It's GREAT at converting files of all types, including Mac, NExT, Sun, and various PC formats... It's also a great player and editor, with various special effects that put Windows' Sound Recorder to shame. It requires a driver for various sound cards... The only builtin one is for the pc speaker , but if you're just using it to convert things, you can convert them in SoundTool and then play them in Sound Recorder. Give it a try! Bret -- * "Why, that's the second | * * biggest monkey head I've | * * ever seen!" -Guybrush | *
comp.os.ms-windows.misc
ma90jjw% Re: Canon BJ200 and HP DeskJet 500... In-Reply-To: 's message of Sat, 24 Apr 1993 22: 31:30 GMT Nntp-Posting-Host: hayle Organization: DRA Malvern, Worcs., UK Lines: 24 In article <> writes: @nd.edu wrote: : The key issue that I bought my BJ-200 on was ink drying speed. You really : have to try awful hard to get the BJ-200 ink to smear. The HP DeskJets need : 10-15 seconds to completely dry. In both cases, however, do not get your : pages wet. Unlike laser printers, the material on your pages is INK, not : toner. But that should go without saying. I think the ink now used in the DeskJet family is water-fast. I've had pictures ruined by a few drops of rain. These were colour pictures from a DeskJet 500C. Mind you, it could have been acid rain:-) I use a BJ10ex. Ink dries fast, but it really doesn't like getting wet. -- /-----------------------------------------------------------------------------\ |Justin Whitton at ma90jjw% |Where no man has gone before..| |after August mail \------------------------------| |Disclaimer: My opinions count for nothing, except when the office is empty. | |I'm a student => intelligence = 0. | \-----------------------------------------------------------------------------/
comp.os.ms-windows.misc
Summary: ATI Graphics Ultra Questions etc Reply-To: Organization: Eos Systems Inc, Vancouver, B.C., Canada Lines: 147 To those interested in the new ATI Ultra Cards: I had posted some questions regarding the new ATI Ultra Pro cards and had asked confirmation of some opinions. This message is a summary of the responses. Thanks to all of you that replied. > 1) The card does not work in a system with 32M RAM. a) The higher memory limits apply to ISA cards only, as far as I know. The VLB and EISA version should have no problems. b) I'm pretty sure from my experience that the ISA version doesn't work in systems with over 16M Ram. There is supposed to be way of switching the "memory aperture" feature off to prevent this, but apparently it doesn't work. I posted some "help me" messages on the net and people indicated that the EISA card didn't have this problem. c) FALSE d) The VLB card, which I have, allows you to set memory aperture over 32M by using their configuration software. No messing with jumpers necessary. The 32M problem is probably valid only for ISA cards. > 2) The card works in a 32M system with some switches > set but it is much slower. a) Again, the memory aperture need only be disabled if you have more than 124M RAM or 12 M . 32M should not be a problem for you. b) Dunno. c) Depends on the bus. YES if ISA, NO if EISA or Localbus > 3) The card is _interlaced_ in its 24bit modes. a) Nope. I can use 640x480 at 72hz, 24-bit and 800x600 at 70hz, 24-bit, all non-interlaced. b) Yes - According to PC Magazine, they've tested a local bus version that does 1024x768 in 24-bit which may or may not be interlaced. c) Not for the Pro. Sometimes for the Plus. Some modes may run only interlaced on certain monitors. This has nothing to do with 24 bits ... only with screen size. Note that for 24 bit color and Windows you MUST have 2 megs, memory size calculations notwithstanding. > 4) The latest build 59 drivers still do not work in many > cases. a) They aren't perfect, but are much improved. I don't recall the last time which I had to leave mach 32 mode and switch to 8514 or VGA mode due to software incompatibility. b) True. Many people recommended going back to Build 55 or 54. c) They appear to be excellent, but have a few bugs. For example, certain graphs with dashed lines in Mathcad 3.1 do not print correctly, though they do display OK on the screen. They are about par for fancy cards .. other accelerated cards also have bugs. d) Overall, I like the card, even if driver performance is somewhat less than satisfactory. I am running the 1024*768 16 Color mode as that is all my NT driver for October NT version seems to allow. I will say this that Color performance is not quite as nice as a Diamond Stealth VRAM, but I have not been able to try out a lot of the options on the old driver. > 5) This card is the fastest full colour card for the money. a) It's quite fast, but whether or not its the fastest is open to debate. b) Yes - I'll admit it was very very fast in 16-bit mode, which is what I wanted to use it for. Too bad it crashed every 20 minutes or so... c) Depends on many many things. > 6) This card is the greatest thing since sliced bread. ;-) a) I like it. b) Well - PC Magazine seems to think it is. c) Yes, this appears to be true :-) d) As to greatest thing since sliced bread, I doubt it. Better cards are coming out. Who knows, maybe ATI will come out with something faster yet. Several reviews I read rated one Pycon Winjet card as a superior performer at a cheaper price except for availability of drivers, which Pycon was developing at that time. Overall, the card has a lot of potential, but you have to be able to use it. ----------------------------------------------------------------------------- That is the end of the questions. These were the most discussed items in this group so I thought they needed confirmation. For those of you not familiar with the card I have included a summary here ATI Graphics Ultra Plus: - Accelerated 1024x768 at 65K colours - True colour at 800x600 - Multimedia Video Acceleration Stretch full motion video windows to full size - Fast VGA - Includes 3 button mouse - Anti-aliased fonts - Real-time pan and zoom across large virtual windows desktop - Around a 1/2 length card size - Priced from $400 U.S. ATI Graphics Ultra Pro: - Everything in Graphics Ultra Plus - Faster performance with VRAMS - Accelerated 1280x1024 at 256 colours 74Hz non-interlaced - Available in ISA, EISA and Microchannel - Priced from $600 U.S. ATI Technologies 756-0718 I hope this summary can be of use to you. Al P.S. I am not associated with ATI Technologies in any way other than having used their previous ATI Ultra card for a few years . -- Alan Walford Eos Systems Inc., Vancouver,B.C., Canada Tel: 604-734-8655 OR ...uunet!wimsey.bc.ca!eosvcr!aew
comp.os.ms-windows.misc
Re: Utility for updating Win.ini and system.ini Reply-To: Organization: Loughborough University, UK. Lines: 11 In article <> writes: >I nead a utility for updating *.ini files for Windows. > >Do I find it on any FTP host? > >Svein > In Windows 3.0 there is a built-in called sysedit.exe that is just what you need. Windows 3.1 I don't know......
comp.os.ms-windows.misc
EMM386.EXE and Windows and Dos6 Nntp-Posting-Host: piaget.cs.kuleuven.ac.be Organization: Dept. Computerwetenschappen Lines: 17 In Windows I created a permanent Swap-file of 7771Kb as win3.1 recommended me to do that . If I use EMM386.EXE, after win3.1 startup I have 6689K of memory free, if I leave EMM386.EXE out of my config.sys I have 9935K of memory free, and windows recommends me a swap file of 11769K. I use DOS6, with memmaker, have 4MB of internal Memory and a 486DX, Does anybody knows why this is happening I need an optimized DOS-environment, because i develop applications for DOS using a windows programming environment. Rudi
comp.os.ms-windows.misc
Help with changing Startup logo Organization: Express Access Online Communications USA: 800-546-2010 Lines: 21 Distribution: usa NNTP-Posting-Host: access.digex.net Summary: Help with changing Startup logo I know this is probably a FAQ, but... I installed the s/w for my ATI graphics card, and it bashed my Windows logo files. When I start Windows now, it has the 3.0 logo instead of the 3.1 logo. I thought the files that controlled this were \WINDOWS\SYSTEM\VGALOGO.RLE \WINDOWS\SYSTEM\VGALOGO.LGO I restored these files, but it didn't change the logo. Anyone know what the correct files are? Thanks. -- <Charles U. Farley> Average IQ of Calgary Board of Ed. Employee: 65
comp.os.ms-windows.misc
Re: Can I Change "Licensed To" Data in Windows 3.1? Organization: Marquette University - Computer Services Lines: 19 Reply-To: NNTP-Posting-Host: vmsd.csd.mu.edu In article <>, writes: >Have you tried re-installing the software? Otherwise I would be dubious about >simple ways to change that screen. Is it not designed to be an embarassment to >would be pirates? > ahh, yes, this is a fun topic. No, once the name is incribed on the disk, that is it, it is encoded. Not even a HEX editor will find it. You can write over the "Licensed to:", but you can't change the name underneth it. I think if you wish to change this you would have to be a pirate, and we're not going to promote that here. ------------------------------------------------------------------------ | Robert S. Dubinski | Aliases include: Robb, Regal, Sir, Mr., and I | ------------------------------------------------------------------------ | Marquette University ||||||||||| Math / Computer Science Double-Major| ------------------------------------------------------------------------ | Internet Address: 2A42Dubinski.vms.csd.mu.edu | Milwaukee, WI | ------------------------------------------------------------------------
comp.os.ms-windows.misc
Re: Why is my mouse so JUMPY? Organization: Computer Science Department, Stanford University. Lines: 42 In article <> writes: > writes: > >>I have a Microsoft Serial Mouse and am using mouse.com 8.00 . Vertical motion >>is nice and smooth, but horizontal motion is so bad I sometimes can't click >>on something because my mouse jumps around. I can be moving the mouse to >>the right with relatively uniform motion and the mouse will move smoothly >>for a bit, then jump to the right, then move smoothly for a bit then jump >>again . This is crazy! I have >>never had so much trouble with a mouse before. Anyone have any solutions? > >>Does Microsoft think they are what everyone should be? <- just venting steam! > >I think I have the same problem. I think it is caused by the rubber ball >in the mouse, which doesn't roll so smooth. The detectors in the mouse >notice this and whoops, I hit a mine ). > >I think the solution will be buying a new mouse, and/or using a mouse pad. > >Wouter. And/or taking the rubber ball out of the mouse and cleaning it with alcohol . This is good to do every so often, even if you have a mouse pad. Dust still gets caught in the mouse and on the rubber ball. As well, lint and other garbage may find it's way onto the rubber ball and get into the mouse damaging the horizontal and vertical sensors. Hope this helps. Good luck. -- Sincerely, Robert Kayman ---- -or- "In theory, theory and practice are the same. In practice, they are not." "You mean you want the revised revision of the original revised revision revised?!?!"
comp.os.ms-windows.misc
Re: MIDI files on MS-Win3.1 and SoundBlaster 1.0? Article-I.D.: medtron.1993Apr22.190051.23597 Organization: Medtronic, Inc. Lines: 31 Nntp-Posting-Host: bhutan.inst.medtronic.com X-Newsreader: TIN [version 1.1 PL8] The Cybard wrote: : I have a 486DX-33 computer with a SoundBlaster 1.0 card. I'm running : Microsoft Windows v3.1. I have the SB driver set up properly to play : normal sounds . I want to play midi files through the : Media Player that is included with windows. I know I have to set up the : patch maps or something in the MIDI-Mapper in the Control Panel. I KNOW : NOTHING ABOUT MIDI. : How do I set up Windows so that I can play MIDI files? If you install the Soundblaster windows drivers correctly, and have the latest drivers, the media player should be setup to play files authored to Microsoft's Multimedia midi authoring standard , see the section in the back of the Voyetra manual in the Soundblaster midi upgrade kit. You'll find that midi files exist with all kinds of different mappings, so don't expect them to always sound correct without using some kind of midi file editor, such as Voyetra's Sequencer Plus. You can attempt to use the midi-mapper to remap the patches for soundblaster, but since you cannot modify the sbfm.drv you are allways stuck with the instruments that come with this driver. Unless you can find an editor for making modifications to the instrument settings in sbfm.drv , I would suggest you locate the early version of soundblaster drivers that were mapped to mt32 voices, and the later drivers that are mapped to the general midi voices. : : -- : David Thomas Dudek / \ __ _ The Cybard : State University / \ / `-' ) ,,, : of New York / "If music be the food of love, \ | | |||||||[:::} : @ Buffalo / play on!" - Wm. Shakespeare \ `__.-._) '''
comp.os.ms-windows.misc
Re: Borland's Paradox Offer Organization: RedRock Development Distribution: usa Lines: 13 In article <> writes: |I am considering buying Borland's Paradox for Windows since I |would like to use a database with Windows for both work/home use. I would like to advantage |of Borland's "$129.95 until April 30" offer if this package |is everything that Borland claims it to be. So, I was |wondering ... has anybody used this and/or have any opinions? Yes, and it's pretty much what they claim. I haven't had time to try all of it. Considering the price, even if you decide you don't like it, it should be saleable over the next 2-3 months for what you have in it . All in all it's very serviceable; and in my humble opinion, more powerful than Access.
comp.os.ms-windows.misc
Re: moving icons Organization: AT&T Distribution: na Lines: 15 In article <> rutgers!viamar!kmembry writes: >I remember reading about a program that made windows icons run away >from the mouse as it moved near them. Does anyone know the name >of this program and the ftp location There's a program called "Icon Frightener" included with the book Stupid Windows Tricks by Bob LeVitus and Ed Tittel . It's freeware. If it's not on the net anywhere, I'll happily email a copy to someone who's willing to upload it . -- Bob Nichols AT&T Bell Laboratories
comp.os.ms-windows.misc
Re: Searching for a phonetic font Organization: Fac. Wiskunde & Informatica, VU, Amsterdam Lines: 23 writes: : I'm searching for a phonetic TrueType font for Windows 3.1. If : anybody knows one, please mail me! : : Thanks. : : dw : : : ################################################################## : Dipl.-Inform. Dietmar Weidlich # IfADo, Ardeystr. 67 # : # D-4600 Dortmund 50 # : Phone ++49 231 1084-250 # >> Dr. B.: "Koennten Sie das # : Fax ++49 231 1084-401 # MAL EBEN erledigen?" << # Yes, I'm looking for phonetic font too! So if you know one, please mail me too! Thanks in advance Patrick Hudepohl VU Amsterdam The Netherlands
comp.os.ms-windows.misc
Re: NDW Norton Desktop for Windows Organization: University of California, Berkeley Lines: 7 NNTP-Posting-Host: garnet.berkeley.edu >I would like to know how to STOP or uninstall this program!! If an Uninstall icon doesn't exist in the Norton Desktop Apps group: Run NDW's install program with /u.
comp.os.ms-windows.misc
Re: Program manager ** two questions Nntp-Posting-Host: 130.187.90.30 Reply-To: Organization: Evans & Sutherland Computer Corp., Salt Lake City, UT Lines: 20 In article <>, writes: |> |> Is it possible to change the icons in the program groups? I'd like |> to give them some individuality. |> |> Can you set up a short-cut key to return to the Program Manager? |> I know <CTL><ESC>, <ESC> will do it, but I'd rather set it up so I |> can avoid the task list and get back to the P/M with <ALT><F1>. I use PlugIn, an enhancement to Program Manager. It allows for sure, I don't know on . Anyway, give it a try. I like it a lot and registered it right away It can be found at ftp.cica.indiana.edu [129.79.20.84] in /pub/pc/win3/util/plugin13.zip -Bruce -- Bruce F. Steinke | "Never know when you're going to | need a good piece of rope." Software Technical Support Engineer | Sam Gamgee Evans & Sutherland Computer Corp. | <My mail, My Opinions>
comp.os.ms-windows.misc
Searching for a phonetic font Organization: Institut f. Arbeitsphysiologie a.d. Uni Dortmund Lines: 13 I'm searching for a phonetic TrueType font for Windows 3.1. If anybody knows one, please mail me! Thanks. dw ################################################################## Dipl.-Inform. Dietmar Weidlich # IfADo, Ardeystr. 67 # # D-4600 Dortmund 50 # Phone ++49 231 1084-250 # >> Dr. B.: "Koennten Sie das # Fax ++49 231 1084-401 # MAL EBEN erledigen?" << #
comp.os.ms-windows.misc
FTP-site for .WAV-files Organization: Institutt for informatikk, Universitetet i Tr.heim, AVH X-Newsreader: Tin 1.1 PL4 Lines: 27 Hello everybody... Are there any ftp-sites with wav-files available??? Frode Kvam :-) -- _______________________________________________________________________________ _/_/_/_/_/ _/_/_/_/ _/_/_/ _/_/_/ _/_/_/_/_/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/_/_/ _/_/_/_/ _/ _/ _/ _/ _/_/_/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/_/_/ _/_/_/ _/_/_/_/_/ _______________________________________________________________________________ Name: Frode Kvam Univ: University of Trondheim, dept of informatics E-mail: Snail-mail: Lademoens Kirkealle 8 7042 TRONDHEIM Voice: + 47 7 50 45 06 _______________________________________________________________________________ *** Beware of Programmers who carry screwdrivers. *** _______________________________________________________________________________
comp.os.ms-windows.misc
Re: Win NT - what is it??? Organization: Center for Reliable and High-Performance Computing Lines: 45 <> <> NNTP-Posting-Host: lyra.crhc.uiuc.edu In-reply-to: 's message of Fri, 16 Apr 93 21:34:28 GMT In article <> writes: > Somewhere in this thread, it has been said that Windows NT is a > multi-user OS, as well as multi-threading, etc. I certainly haven't > seen this to be the case. There are seperate accounts for each person, > and even seperate directories if that is desired. I don't see an > implentation of simultaneuos use though. > > Scott It certainly is multi-user. What I have seen from the March Beta is that it doesn't yet come with the stuff which exploits multi-user features. I remember somebody from MS stating that it doesn't allow two users share one GUI. My interpretation of this was that one user per console but all the networking and RPC based stuff you want. I believe ftp and rlogin deamons for NT systems will come from third party. Somebody already has a Beta version of an unsecure ftpd on the net. There is no reason why one cannot write a posix based shell like csh on Unix for remote logins. In general I liked NT when I checked it out. It slow compared to Win3.1 . The beta version, although being slow, botts up much faster than my SUN workstation. Windows subsystems also start up a lot faster than X windows. I believe Bill Gates was right when he stated that NT was not for everybody. After playing around with it for a while I was convinced. If I owned a busines using a "business computer" from IBM or some other established vendor, I would consider moving to NT platform because it would provide a much cheaper solution . It provides the robustness such an application requires. On the other hand if you like your DOS games, more or less forget about NT. You can always boot to DOS but in general that defeats the purpose of using NT. Most of NT's features are visible in a networked environment and in such an environment you can't reboot your machine at will. For personal use, I would rather wait for the Win32 based Windows release than jump to NT bandwagon. I expect most applications will keep on using Win16 until Win32 becomes widely available. -- Sadun Anik, U of Illinois at Urbana-Champaign Center for Reliable and High-performance Computing e-mail:
comp.os.ms-windows.misc
RE Diamond SS 24X Organization: Physics Department, FSU News-Software: VAX/VMS VNEWS Reply-To: Lines: 25 >Has anyone experienced a faint shadow at all resolutions using this >card. Is only in Windows. I have replaced card and am waiting on >latest drivers. Also have experienced General Protection Fault Errors >in WSPDPSF.DRV on Winword Tools Option menu and in WINFAX setup. >I had a ATI Ultra but was getting Genral Protection Fault errors >in an SPSS application. These card manufactures must have terrible >quality control to let products on the market with so many bugs. >What a hassle. Running on Gateway 2000 DX2/50. >Thx Dave L I have used both version 1.17 drivers for Win 3.1 and the new 2.03 drivers. I have had none of these problems. No GPF's at all. I have a feeling that your problems are not with the card or drivers. The ATI Ultra drivers are considered some of the most reliable on the market, and the SS 24X ones seem quite good as well. Maybe you should check BIOS problems in your Gateway. I know a few people with Gateway DX2's, and all of them have found some problem or other with compatibility -- especially with graphics. The only GPF's I have ever had can be directly attributable to using/ abusing applications. I even got the newest drivers from Diamond when people started complaining. I still only have one small problem with them, and it is that the hardware cursor is slightly jumpy during writes/ reads to the swap file. Greg Bishop.
comp.os.ms-windows.misc
Losing dark colors of my icons Organization: Center for Reliable and High-Performance Computing Lines: 19 NNTP-Posting-Host: lyra.crhc.uiuc.edu Here is an annoying problem. Whenever I save an icon which contains dark colors like dark red or dark purple, these colors are converted to the bright colors. This happens with every icon editor including the image editor that came with SDK. I don't have this problem with .BMP files either; only with .ICO files or icon libraries. The problem is with the icon colormap field in the icon file header. Checking the file with a binary editor, I can see that the masks are OK. By editing the colormap manually I can fix the colors. Does anybody know what may be causing this problem? Thanks. -- Sadun Anik, U of Illinois at Urbana-Champaign Center for Reliable and High-performance Computing e-mail:
comp.os.ms-windows.misc
WORD 2.0 HELP! Organization: Marquette University - Computer Services Lines: 10 Reply-To: NNTP-Posting-Host: vmsa.csd.mu.edu Hello, I'm having problems printing SPANISH characters with WFW2. I was using the Celtic True type which has the accented characters, and used insert symbol to put in in the document. However, when I put it in the doc, I get a big square character, and then it prints out just the same . Can anyone tell me if and how they have printed Spanish characters? I know WP 5.1 has this built-in, but I do not recall ever seeing this option on WFW2. HELP! ------------------------------------------------------------------------ | Robert S. Dubinski | Aliases include: Robb, Regal, Sir, Mr., and I | ------------------------------------------------------------------------ | Marquette University ||||||||||| Math / Computer Science Double-Major| ------------------------------------------------------------------------ | Internet Address: 2A42Dubinski.vms.csd.mu.edu | Milwaukee, WI | ------------------------------------------------------------------------
comp.os.ms-windows.misc
Re: WP-PCF, Linux, RISC? Organization: Camosun College, Victoria B.C, Canada X-Newsreader: Tin 1.1 PL4 Lines: 47 writes: : In article <1qu8ud$> writes: : >In article <> writes: : >> : >>Dear friend, : >> The RISC means "reduced instruction set computer". The RISC usually has : >>small instruction set so as to reduce the circuit complex and can increase : >>the clock rate to have a high performance. You can read some books about : >>computer architecture for more information about RISC. : > : >hmm... not that I am an authority on RISC ;-) but I clearly remember : >reading that the instruction set on RISC CPUs is rather large. : >The difference is in addressing modes - RISC instruction sets are not : >as orthogonal is CISC. The original RISCs had small instruction sets, and simple ones. The idea was that a) every instruction should be completable in a single clock cycle and b) to have no microcode and c) extensive pipelines. A few comparisons : CPU Year Instructions Microcode --- ---- ------------ --------- IBM 370/168 1973 208 420Kb DEC VAX 11/780 1978 303 480Kb IBM 801 1980 120 0 UCB RISC 1 1982 39 0 Stanford MIPS 1983 55 0 While researching for the VLSI VAX, DEC discovered that 60% of the VAX microcode is there to support 20% of the instruction set which accounted for a mere 0.2% of all instructions executed. The uVAX 32 subsetted the architecture onto a single chip and used a software emulator for these very complex instructions, the full VLSI uVAX included the entire instruction set, was 5-10 times more copmlex but only ranm 20% faster. CPU Chips Microcode Transistors --- ----- --------- ----------- uVAX 32 2 64K 101K VLSI uVAX 9 480K 1250K -- Real: Deryk Barker, Computer Science Dept., Camosun College, Victoria B.C. Email: Phone: +1 604 370 4452
comp.os.ms-windows.misc
Re: Help with changing Startup logo Reply-To: Distribution: usa Organization: Oracle Corp., Redwood Shores CA Lines: 32 Nntp-Posting-Host: monica.us.oracle.com X-Disclaimer: This message was written by an unauthenticated user at Oracle Corporation. The opinions expressed are those of the user and not necessarily those of Oracle. In article <1rgtba$> writes: > > I know this is probably a FAQ, but... > > I installed the s/w for my ATI graphics card, and it bashed my Windows > logo files. When I start Windows now, it has the 3.0 logo instead of > the 3.1 logo. > > I thought the files that controlled this were > > \WINDOWS\SYSTEM\VGALOGO.RLE > \WINDOWS\SYSTEM\VGALOGO.LGO > > I restored these files, but it didn't change the logo. Anyone know what > the correct files are? > > Thanks. > Somewhere there is a program called winlogo.zip that does the trick. It works great. I believe the reason why you can't change the files you mentioned is that the logo is actually imbeded into the windows executable -Eric > > -- > <Charles U. Farley> > Average IQ of Calgary Board of Ed. Employee: 65
comp.os.ms-windows.misc
Subject: Re: WINBENCH 3.11 help -- graphics comparison?!? Organization: University of Arizona, Tucson Lines: 32 In article <> writes: > > >In article <> writes: >>I have a question about WINBENCH 3.11.. >> >>I have a 386/33 and a Ahead B card and got these results- >> >>windows vga driver - 2.44 million >>ahead B driver - 455,000 winmarks >>windows svga driver - 1.68 million winmarks... >> >>I was thinking about upgrading to a diamond 24x card.. I read it had about >>8 million winmark.. > >On my 386dx 33Mhz 4Mb RAM >Winbench 2.5 > 24x v2.02 16.7M 1,668,274 > v2.03 16.7M 1,668,985 > v2.03 16 4,602,428 > v2.03 256 7,635,278 Be very careful with these results! As I recall, numbers from Winbench 2.5 are calculated differently from 3.1, and so these figures are not comparable. However, to answer Stephen's question, replacing the Ahead B card with a Diamond 24x will yield a cost-effective, dramatic speed increase for Windows. That or the ATI Graphics Ultra Plus.... -- Greg Franklin
comp.os.ms-windows.misc
Re: Can I Change "Licensed To" Data in Windows 3.1? Nntp-Posting-Host: hermes.acm.rpi.edu Lines: 65 In <> writes: > ahh, yes, this is a fun topic. No, once the name is incribed on the >disk, that is it, it is encoded. Not even a HEX editor will find it. You can But a disk compare utility will. And Windows 3.1 is also flexible enough at install time that you can copy all the files onto your hard disk, which greatly speeds things up and makes them less annoying, if you can spare the 7 or so compressed megs. >write over the "Licensed to:", but you can't change the name underneth it. I >think if you wish to change this you would have to be a pirate, and we're not >going to promote that here. No, we're not. But we're also not going to promote pandering to corporate paranoia when the real issue is convenience. I don't *like* dealing with floppies. Personally, I have no use for changing the registration info, but I see it as a valid need, and one that ought to be solved using a quick little utility rather than a half-hour reinstall that's just about guaranteed to mess up your settings in one way or another. So, while I'm not going to put much time into it myself, here's the procedure for getting on your way to finding the encoded information: 1. Copy all your Windows disks into the directory from which you want to install it. I've been using c:\WINSTALL myself. 2. From there, copy that directory to something like c:\WINORIG. 3. Install from c:\winstall. 4. comp the two directories to determine changes. i.e., comp *.* \winorig\*.* >\report.txt 5. Look in the report file for the file that change. Assuming they didn't cover themselves covering their own tracks, at least one file should have a difference noted at a particular offset. Locate said offset in the original directory and see what's there using a hex editor, and do the same for the modified one. 6. You're on your own as far as breaking the code goes; I don't really do cryptography. It's probably just an xor key or something; I think MS is more concerned with Joe Schmoe at the office personalizing his copy than with "real pirates" who will probably just disassemble the damned thing anyway. This technique should work with just about any obnoxious corporate product that tries to write to the original floppies when you install; in some extreme cases you may not be able to back the floppies up to hard disk, and will be stuck doing a compare on floppies . As I noted before, if you can afford the space on the hard disk, and don't do much in the way of customization, reinstalling from one directory to another may be less arduous. Doing some of the stuff I've mentioned here may well void your license with Microsoft, as if they'd ever find out. If you aren't careful with the disk editor, you could also mung something important... duh. I guess that's a disclaimer. Have at it.... Rob -- Rob Keywords - Oldfield Jane's Leather Yes Win3.1 Phish light blue right Bondage r.e.m. DTP Steely Dan DS9 FNM OWL Genesis In the spaceship, the silver spaceship, the lion takes control.....
comp.os.ms-windows.misc
Re: Visual c++ In-Reply-To: David A. Fuess's message of 26 Apr 1993 14: 22:55 GMT Nntp-Posting-Host: 192.8.210.197 Organization: Pelican Software Corporation Distribution: usa Lines: 20 To clarify: VC++ *is* considered an upgrade for C7. There will be no product called C 8.0 . C7 is not a "DOS"-only product -- it is a C/C++ compiler capable of producing executables for DOS or Windows, as is VC++ . The difference is that VC++ comes with many Windows-hosted tools which assist developers in creating Windows executables much more quickly . Initial impressions have been very favorable. Everyone who is a registered user of C7 should have received a considerable amount of info regarding the specifics of C7. If you haven't, call Microsoft and I'm sure they'd be happy to send you some! -Jefrem Iwaniw Pelican Software Corporation
comp.os.ms-windows.misc
Re: Anyone know stacker's email address? Organization: Hewlett-Packard Waldbronn, Germany Lines: 15 > Does anybody know if stacker has a e-mail address and if > so, what it is? I know they have a BBS and something on > compuserve, but I'm hoping someone know's their e-mail > address. John White from STAC Electronics can be reached at compuserv as 72370,1005. For me would as email address work from Internet. ------------------------------------------------------------------------------ internet: phone: Germany 7243 602296 address: Fromut FRITZE, Waldbronn Analytic Division R&D, Hewlett Packard Str, D 7517 Waldbronn 2, Germany ------------------------------------------------------------------------------
comp.os.ms-windows.misc
Windows Disk Drive Test availabel? Nntp-Posting-Host: rintintin.colorado.edu Organization: University of Colorado, Boulder Lines: 28 Is their a pd/freeware hard drive utility that can handle a compressed IDE drive without screwwing it up? Need to document occasional failures in reading/writing, check overall integrity of disk's hardware and sectors. I believe that all of my problems with DOS/Windows can be isolated to my drive. Getting occasional corrupted files, even with smartdrive, 32 bit access turned off. Had these problems under DOS 5. Only with drive C. Drive D may have had one failure, but that file was under the control of Win/Winword on drive C. All utilities available to me report no problems. DOS, NDD . Another symptom, SD took forever on C, and kicked me out with a suspension till NDD run 6 to 8 times. Thanks. -- Mike Hayes |"Knowledge is good." - Faber College Motto WWW |"Knowledge and Thoroughness" -Rensselear Poly Motto Unemployed Tech, |"No, thank YOU!" -Groucho Marx, 'A Day at the Races' Driven to banging my head against engineering physics for 4 years.
comp.os.ms-windows.misc
Re: ATM Organization: AT&T Lines: 39 In article <1r1jq4$> writes: > >I've been reading, with much confusion, about whether or not to use >ATManager. Lately, all the packages I've been buying have all >included ATManager as a "bonus" >I do some desktop publishing using PageMaker and Coreldraw. >Coreldraw comes with a nifty laser disk that contains over 200 diff >types. Add that to the TTfonts that come with win31 and you have a >decent amount of fonts. I print my creations out on an HP4 >Postcript, at 600 dpi resolution with the "Resolution Enhancement >Technology" and .. well ... I get some darn good copies. >So good that there isn't any diff whether or not ATManager is turned >on or not. Is it worth it to run ATM at all? Especially with these >better printer technologies ... and TT? ATM will do nothing for your TrueType fonts. If your TrueType fonts are sufficient for your needs, don't run ATM. I have a lot of fonts that I can install either as Type-1 PostScript or as TrueType. I have noticed that: 1. TrueType font files are at least 1/3 larger than their Type-1 equivalents. If you are using a disk compressor, though, be aware that TrueType fonts will compress, whereas Type-1 fonts will not . 2. With a 300 dpi laser printer, the "artificial bold" version of a TrueType font is indistingishable from the original, forcing me to install the actual bold variants if I want to use them. Type-1 PostScript fonts under ATM generate a visually distinct bold variant from the base font. I realize that the artificial bold font that ATM generates is aesthetically inferior to the hand-generated bold TrueType variant, but it is sufficient for my needs, and not having to install bold variants saves me 50% on disk space . -- Bob Nichols AT&T Bell Laboratories
comp.os.ms-windows.misc
Windows Shareware Monthly Article-I.D.: tamsun.1ps35rINNfpd Organization: Texas A&M University, College Station Lines: 100 NNTP-Posting-Host: tamuts.tamu.edu Windows Shareware Monthly is an on-line forum for information about the newest and best Windows 3.x and NT shareware/freeware software. WSM is a compilation of submissions from shareware/freeware authors in a single Windows .HLP file. All types of software may be submitted for entry in WSM - utilities, applications, games, programming tools, etc. WSM benefits Windows shareware/freeware authors by allowing them to publicize their software releases, inform users of updated versions, and to increase their installed base of users. Those searching for specific Windows software will benefit by having a complete list of available software available at their fingertips - complete with feature lists, current prices, and any other relevant information. Windows software authors may submit entries to Windows Shareware Monthly in the following manner: 1. Compose a short summary of the function of the software. Include all special features which are unique to your product and which set it apart from other programs in the genre. Be sure to include specific details such as: the current release version, where the software is available, how much the registration fee costs, how much disk space is required, any special requirements , how the author may be contacted, etc. Because text is highly compressible, the summary may be as long as is necessary, however, it is best to keep it short. A good guideline is a single screenful of 12-point text at 640x480 resolution. Order forms and other such addendum may be included if desired. All submissions whould be in plain text format. Formatting will be exactly as it is submitted - I will simply cut and paste text files into a Help Authoring system. If you require special formatting conventions - such as boldface text or italics, or a larger font size, indicate so CLEARLY within the text file. For best results, use Windows NotePad to create the .TXT file. 2. Include up to 100k of Windows-format .BMP screen-shots which display the workings or special features of each program. Special cases which require 256-color bitmaps may submit up to 250k of .BMP files - all other should observe the 100k limit and use 16-color format. For maximum compatiblity with the software which will be used to create the WSM .HLP file , please save the bitmaps with Windows Paintbrush or WinGIF. 3. Include a 16-color .BMP of the program's icon . Many programs are available to convert .ICO to .BMP format, or Windows Paintbrush may be used. The .BMP will be embedded in the summary text. 4. Double-check for spelling errors, formatting corrections, etc. 5. Compress the .TXT file, the .BMP of the program icon, and any additional .BMPs into a single file using PKZIP . 6. Submit the entry by UUENCODING the .ZIPfile, and e-mailing it to: if submitting via the Internet or Compuserve. If submitting via America Online, send a brief message indicating submission, and append the .ZIP file, then e-mail to: DiegoAA 7. If any changes are required, or a new version is released, complete the above procedures again. Send all submissions to the @TAMUTS address, and any comments, suggestions, criticisms, to All entries received before the deadline will be included in the subsequent edition of WSM. The editor will not be held responsible for any errors, and we reserve the right to make changes to the entries. WSM is not limited to shareware/freeware software. A special area will be devoted to commercially available Windows 3.x and NT software. Commercial software authors should follow the same steps above, with the exception of the limitations on size - the .TXT file and .BMPs may be as large as required . There is no charge for the publishing of either shareware/freeware or commercial product entries. Advertisements for computer hardware, software, bulletin boards, etc. may be submitted as well. Again, the same procedures apply, with the exception of the size limitations. There is no charge for advertising space. The first ten advertisements submitted each month will be included; subsequent submissions will not be included due to size constraints. WSM is currently looking for persons willing to devote the time to author columns within WSM. A C/C++ programing section, a Visual Basic section, and two Windows-specific opinion/advice columns are envisioned. All work will be on a voluntary basis. If you wish to aid WSM and author a monthly column on one of the above topics, please send us mail at or DiegoAA on America Online. The first edition of WSM will be distributed May 1st via America Online, Compuserve, and the Internet. The deadline for submissions is April 28th. The first edition filename will be WSM-1.ZIP, with each subsequent monthly release continuing in the series naming convention . Each edition will be released on the first of each month, and the deadline for submission will be at least three days before release.
comp.os.ms-windows.misc

The data in this dataset is a subset of 20newsgroups/SciKit dataset:

https://scikit-learn.org/0.19/modules/generated/sklearn.datasets.fetch_20newsgroups.html#sklearn.datasets.fetch_20newsgroups


license: mit dataset_info: pretty_name: 'SciKit newsgroup20 subset' features: - name: index dtype: int64 - name: Text dtype: string - name: Label dtype: int32 - name: Class Name dtype: string task_categories: -text classification -sentence similarity tags: -text classification -sentence similarity splits: - name: train num_bytes: 799164 num_examples: 750 download_size: 477299 dataset_size: 799164 configs: - config_name: default data_files: - split: train path: data/train-*

Downloads last month
47