text
stringlengths 65
6.02k
| class
stringclasses 3
values |
|---|---|
Re: Centris 650 Math CoProcessor option
Reply-To:
Organization: Dartmouth College, Hanover, NH
Disclaimer: Personally, I really don't care who you think I speak for.
Distribution: usa
Moderator: Rec.Arts.Comics.Info
Lines: 40
writes:
>Sorry if this is a FAQ. I don't normally read comp.sys.mac.hardware.
>I am purchasing a couple of Centris 650's. I configured the systems
>as follows:
> Eight Mb RAM
> Ethernet
> 1 Mb VRAM
> Math CoProcessor option
>My purchasing agent told me about the math coprocessor option and sent
>me the Apple summary documentation to prove it. I ordered the coprocessor
>option, but I'm really not sure that we needed it. I thought the '040 chip
>had a math coprocessor built into it. Has Apple had a math coprocessor chip
>architectured to keep up with the speed of the '040 chip in the Centris 650?
>I am concerned that I may have set up a hardware bottleneck.
Apple has really confused people with this whole thing. I think
we'll be answering this question for about the next year or so. There is
no "option" to get an FPU on a C650. What you have is a choice of CPUs:
there is the 68LC040 that does not have an integrated FPU like the full
'040 and is only present in the base 4/80 model of the C650 .
And there is the full '040 which you get when you order anything other
than the base 4/80 configuration. Therefore, since you have ordered one
of the 8MB versions with on-board Ethernet models you will not be
getting the LC040. But even if you wanted to have the LC040 you wouldn't
be able to order a C650 with 8MB RAM, on-board Ethernet and an LC040.
It's not an "option."
Also, a note to people out there that have 4/80 C650s and C610s
thinking that there is an optional FPU, the '040 class chip cannot
recognize an external FPU, so there is no socket on the motherboard for
a FPU chip and you cannot go out and purchase an FPU on a PDS card or
something like that. The only way to get an FPU in these machines is to
replace the LC040 with a full '040. And if you have a C610, you will not
need to worry about a heat sink if you do replace the LC040 with the
full '040, but if you have a 4/80 C650 you do need to have a heat sink.
-Hades
| comp.sys.mac.hardware |
Re: CD300 & 300i
Organization: Homewood Academic Computing, Johns Hopkins University, Baltimore, Md, USA
Lines: 89
Distribution: world
NNTP-Posting-Host: jhunix.hcf.jhu.edu
In article <> writes:
>
>In article <>, writes:
>> In article <>, "Donpaul C. Stephens"
>> <[email protected]> wrote:
>> >
>> > What is the difference?
>> > I want a double-spin CD-ROM drive by May
>> >
>> > looking into NEC and Apple, doublespins only
>> > what is the best?
>>
>> Nec Toshiba and Sony nearly deliver the same speed.
>> As apples prices are very low
>> You should buy what is inexpencive. But think of Driver revisions.
>> It is easier to get driver kits from Apple than from every other
>> manufacturer
>>
>> Christian Bauer
>>
>>
>
>
> I thought NEC and Toshiba CD-ROM mechanism have an average
>access time of less than 200 ms. While the SONY-APPLE CD-ROM
>drive has an access time of 300 ms for the doublespin models.
>
>- Chung Yang
>
I have the a CD-Technology drive with the Toshiba mechanism, and it is
supposedly the fast and best now. It has an access of 200ms and a data
transfer rate 300Kb/sec. It is multisession photo-cd compatible. It is
available from educorp for $599, the CD-Technology one, and comes with two
mail in coupons for two free CDs. I'm not sure if the cd's are good, since
I've only had the drive a little less than a month and had the cd's shipped
to my home address in california instead of here in maryland. The
CD-technology drive has a separate power supply separated from the drive,
which supposedly gives it a longer life, and keeps it cleaner with no fan to
attract dust. A Toshiba brand drive is also available, but I think the
CD-Technology is better, since you get the same mechanism, and at a slightly
lower price with two free CDs.
The Apple 300/330i Drive, Sony Mechanism, is around a 300ms access time I
think, and a data transfer rate of 300Kb/sec. I know it is the slowest of the
three mentioned here. It is not widely available, except through the apple
catalog, which is bad at a price of only $599. It is also multi-session photo
cd compatible. I think the external model comes with 7 free cds, some of
which are pretty good.
The NEC drive has been out the longest. it has an access time of 280ms and
a data transfer rate of 300Kb/sec. it is available from many vendors around
$600 dollars, including Educorp. It wasn't multi-sesssion photo-cd compatible
before, but I hear that the current version that is shipping is. Owners of
the older drives can get an upgrade. It does not come with any free cd's
unless you buy it in a bundle.
Of the three CD-Rom drives above, i think the best choices would be the
Apple drive and the CD-technology drive. The apple drive for it's
compatibility with apple products and the cd-technology for it's
speed and performance.
BTW, the models of the drives are:
Apple: AppleCD 300 or AppleCD 300i
CD-Technology: CD-T3401
NEC: CDR-74
I'm very happy with my drive. And have had no compatibility problems
whatsoever. If I am wrong about any of the above, do correct me, but I am
pretty sure of myself, even when I think I'm not.
Also, some of you out there might notice that I have the same last name as
the president of CD-Technology which happens to be in southern california,
my hometown. However, I AM NOT a relative nor do I know the guy. Liu is
just a common chinese name, especially in southern california, with the
enormous chinese community. Besides, one of my doctors in california has
three Steve Liu's as patients and another Steve Liu comes to my school and
lives in the next dorm. This is to show that Liu is very common.
Steve :-)
--
Steve Liu |I wish for a better .sig
|Suggestions are very welcome!
|
| comp.sys.mac.hardware |
Re: Syquest 150 ???
Organization: DSG, Stanford University, CA 94305, USA
Distribution: usa
Lines: 30
In article <> writes:
>I remember someone mention about a 150meg syquest. Has anyone else
>heard anything about this? I'd be interested in the cost per megabyte and the
>approximate cost of the drive itself and how they compare to the Bernoulli 150.
I think you must be talking about the Syquest 105 .
It is a 3.5" Winchester technology drive pretty much like the other Syquest
drives in terms of how it works. According to the latest MacLeak, the
drive has a 14.5 ms access time, 1.9 MB/s sustained throughput . The drive was originally released for the PC
and just recently was released for the Mac world and through they are currently in limited supply, according
to a Syquest rep. they are in the process of ramping up for mass production.
I have already seen them advertised by a number of manufacturers in MacLeak
including PLI, MassMicro, ClubMac, and MacWarehouse's PowerUser. The PLI
and MassMicro units are priced at just around $1000; the lesser name brands
are going for around $750 for an external drive. Cartridges which hold
105 MB sell for about $80 each. At these prices, the drives and cartridges
are cheaper and better performing than the 88MB drives.
Cost per megabyte compares favorably with other cartridge drives and Bernoulli
drives, but for large amounts of data optical is still cheaper, and more
reliable. Personally, I'm excited by the new drive and look forward to
getting my hands on one.
-Chris Wand
--
"Egotism is the anesthetic that dulls the pain of stupidity."
- Frank Leahy
| comp.sys.mac.hardware |
wrong RAM in Duo?
Organization: Massachusetts Institute of Technology
Lines: 9
Distribution: world
NNTP-Posting-Host: thobbes.mit.edu
A few posts back, somebody mentioned that the Duo might crash if it has
the wrong kind of RAM in it. My Duo crashes
sometimes after sleep, and I am wondering if there is any software which
will tell me whether or not I have the right kind of RAM installed. I
had thought that the problem was the battery connection.
Thanks in Advance,
Archon Fung
| comp.sys.mac.hardware |
Re: My IIcx won't turn on...
Organization: MDA-W
Lines: 22
Distribution: world
NNTP-Posting-Host: q5022531.mdc.com
In article <>, wrote:
>
> Anyone know what would cause my IIcx to not turn on when I hit the keyboard
> switch? The one in the back of the machine doesn't work either...
> The only way I can turn it on is to unplug the machine for a few minutes,
> then plug it back in and hit the power switch in the back immediately...
> Sometimes this doesn't even work for a long time...
TJ
This problem is most likely the same that all cx users are experiencing....
Thanks to one very adventurous USENET reader it is easily fixed, if it is the same problem......
Best I can figure it is due to time, heat and repeated warmup/cool downs in
the power supply....i.e., bad solder joints in the power supply circuit
card. Go get a desolder tool from radio shack, a low wattage iron and some
good nonacid solder and resolder the lower left quadrant of the circuit
card with the AC plugs facing away from you..........or get someone to do
it for you. It took me less then 10 minutes and saved me at least $300 for
a new supply!
| comp.sys.mac.hardware |
Re: SIMM vs DRAM
Nntp-Posting-Host: mail.fwi.uva.nl
Organization: FWI, University of Amsterdam
Lines: 16
writes:
>Can anyone tell me what the difference is between a 256K DRAM chip and a
>256K SIMM? I need the former to add memory to my Laserwriter
>LS. Someone is offering to sell me 256K SIMMS he removed from an SE, but
>I have a feeling this may not be the correct form of memory. The sockets
>in the Laserwriter look like they want the spidery-shaped chips .
>Believe it or not, I've never actually seen a SIMM. Help appreciated.
A SIMM is a small PCB with DRAM chips soldered on.
--maarten
--
In real life: Maarten Carels
Computer Science Department
University of Amsterdam
email:
| comp.sys.mac.hardware |
RE: Price drop on C650 within 2 months?
Article-I.D.: leonardo.9304062132.AA00657
Organization: mailEnteringNews at Honeywell SRC
Lines: 36
To: comp.sys.mac.hardware
Posted-Date: Tue, 6 Apr 93 16: 32:51 CDT
Received-Date: Tue, 6 Apr 93 16: 32:52 CDT
Nathaniel Sammons writes:
>I am going to be getting a C650 soon, but I don;t want Apple
>to come out with the Cyclones and the Tempest in a month
>and have the price drop on the system I want. I have negotiated a
>good deal with a supplier for a C650 8/80 and I would like to jump on it,
>but, again, I don't want the price drop to smuther me. BTW, the deal
>I have is a C650 8/80 with mouse for $2295... does anyone know of a better
>deal?
I don't know how to say it best but you are gaurenteed that the
price of the C650 is going to drop this year. This week's MacWeek
reports that Apple is probably planning a drop in August. My guess
is that it may come sooner if Apple decides to change the price
structure upon release of the multimedia units this summer.
Your price looks pretty good at about $50 more then I payed for
mine last month. I would have rather waited for one of the new
machines this sommer but the resale value of my
IIci would have not been squat by then. Thus, financing forced me
to purchase now. I'm happy with the machine and won't feel
betrayed at all when Apple cuts the price to less then $1000 next
week .
Bottome line: If the C650 does what you want, buy it. If you wait
until the Cylcones come out for a price break then you might as
well wait for the PowerPCs to come out for another price break and
then the units which follow them. You may save some money but
you've lost a lot of time when you could have been using the
computer. Face it, Apple's prices are going to be in a continuous
state of flux. At least they aren't going to try raising them
again .
-John
| comp.sys.mac.hardware |
how to boot from ext HD on power on ?
Organization: St. Elizabeth Hospital, Youngstown, OH
Lines: 12
Reply-To:
NNTP-Posting-Host: yfn.ysu.edu
I have an external hard drive I wish to use as startup disk.
problem is, when I switch on the mac, it boots on the internal HD,
but when I restart the mac, it boots from the external.
how do I make it boot directly from the external ?
please email replies if possible.
thanks in advance.
jerry
| comp.sys.mac.hardware |
Chris Roberts <>Re: Floptical Question
Organization: Case Western Reserve University
Lines: 28
Distribution: world
NNTP-Posting-Host: b63683.student.cwru.edu
X-UserAgent: Nuntius v1.1.1d16
X-XXMessage-ID: <>
X-XXDate: Fri, 16 Apr 93 21:04:15 GMT
In article <> Billy Lee Myers,
writes:
>Floptical is, of course a different technology, and doesn't enjoy the
long
>term data storage of opticals. And the last time I looked, floptical
disk
>weren't all that cheap, .
I don't know how many times I've posted this the net. No one EVER
listens.
Once and for all: Floptical Media is only $1.40 a megabyte if you don't
know where to buy it. I am bying my flopticals at $30 per 2 disks. I
see that as $.75 a meagabyte, NOT $1.40. No, I'm not buying in bulk, I'm
not getting a special deal. $.75 a meg is good in my book, Approching
floppy price.
Any questions on my source can be sent to
Chris
Chris Roberts: Here we go again...
Well, at least you know where to find me now.. Logged in a terminal,
checking my mail..
| comp.sys.mac.hardware |
Re: Quadras VRAM Question
Reply-To:
Organization: Dartmouth College, Hanover, NH
Lines: 39
Disclaimer: Personally, I really don't care who you think I speak for.
Moderator: Rec.Arts.Comics.Info
Daniel Salber <> writes:
>I have a question regarding Quadras VRAM. I have tried to find info on this
>but I could not get precise answers.
>On one hand, we have a Quadra 950 with a 16" monitor, which is capable of
>32-bit color. How much VRAM does it have?
To display Millions of colors on a 16" monitor you need 2MB of VRAM
in the Q950.
>On the other hand, we have a Quadra 800 with a 16" monitor, which is capable
>of 8-bit color only, so it must have 512 Ko of VRAM.
Correct. This is the amount of on-board VRAM that the Q800 comes
with.
>I would like to take VRAM SIMMs for the 950 and put them in the 800 so that
>both machines have 16-bit color capability.
>Is it possible, and if yes, how many VRAM SIMMs should I take from the 950?
Yes this is possible. Technically, you only need to take out 2 of
the VRAM SIMMs but leaving in the other two will not get you anything
because the 950 cannot really do anything with 1.5MB of VRAM. It only
knows 1MB and 2MB.
>From the documentation I have, the Quadra 800 must get 1 Mo VRAM to have
>16-bit color, is that correct?
Yes, this is correct. You get to 1MB by putting 2 256k VRAM SIMMs
into the VRAM SIMM slots on the Q800's motherboard.
>Bonus question: where do VRAM SIMMs hide? From the 950 documentation, they
>seem to be *behind* the power supply. Do I really have to take off the power
>supply to access the VRAM SIMMs?
Yup. You have to take off the power supply. It's only a couple of
screws so you should be ok. Just make sure that everything is
disconnected from it and watch out for static discharges.
| comp.sys.mac.hardware |
I want use DeskJet on System7
Organization: FUJITSU.Ltd., Kawasaki, Japan.
Lines: 15
Distribution: comp
NNTP-Posting-Host: ceres.mfd.cs.fujitsu.co.jp
I used HP DeskJet with Orange Micros Grappler LS on System6.0.5.
But now I update system 6.0.5 to System7 with Kanji-Talk 7.1,
then I can not print by my DeskJet.
Is the Grappler LS old ?
Can I use DeskJet on System7 ?
Please tell me how to use DeskJet on System7.
Thank you
--
FROM JAPAN
| comp.sys.mac.hardware |
re: mac portable vs. powerbook 100 answers
Organization: FidoNet node 1:2240/175.5 - Association Mac BBS, Grand Blanc MI
Lines: 8
Can the internal hard drive of the MacPortable upgraded to larger capacity? What is the specs? A 3-1/2" drive? LPS model?
Is there any third party modem greater than 2400 bps? With FAX option?
P.S. I notice the MacPortable batteries are avalable thru the Apple Catalog.
--
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
Eric Choi - Internet:
| comp.sys.mac.hardware |
Half-page hand scanners?
Organization: Lafayette College
Lines: 6
Originator:
Nntp-Posting-Host: lafibm
Is anyone out there using a greyscale handscanner. I'm thinking about
buying one. Is the inexpensive Logitech pretty good. I don't need
super high quality scans- but want it to be worth the $$$$.
Thanks in advance-
Mike Charles
| comp.sys.mac.hardware |
Re: Quadra SCSI Problems???
Organization: Naval Research Laboratory
Lines: 39
In article <>,
wrote:
>
> In article <>, writes:
> |> In article <> writes:
> |> >I don't know about the specific problem mentioned in your
> |> >message, but I definitely had SCSI problems between my
> |> >Q700 and my venerable Jasmine Megadrive 10 cartridge
stuff deleted
> |>
> |> I doubt this is a Quadra-specific problem. I had to get
> |> rid of my "venerable" Bernoulli 20 last year (with enough
stuff deleted
> |> might fix the problem - in my case the cartridges wouldn't
> |> format/mount/partition for A/UX.
>
> All I know is that the Megadrives worked perfectly on both my
> Mac Plus and my Powerbook 140. It was for this reason I assumed
> the problem had something to do with the Quadra. Even with the
> Quadra, they mostly worked OK. The problem occurred when I ejected
> a cartridge from a drive: it would start popping up dialog boxes
> saying "This cartridge must be formatted with Jasmine Driveware"
> even though there was no cartridge in the drive.
>
> --Mark
The problem mentioned last is a known Quadra SCSI problem, it was heavily
discussed last year and an Apple employee pointed out that there was a
one byte error in the SCSI driver routine for the Quadra's . System 7.1 should not have that problem, for most people the
solution was to get an updated driver from the drive manufactor. In my
case MASS Microsystems wrote a new driver which fixed the problem on my
Quadra
700, all that occured early last year.
Michael S. Kluskens
Opinions expressed are the author's and not those of his employer.
| comp.sys.mac.hardware |
Andrew Zelenetz <>Centris 610 Video Problem-HELP
Organization: Memorial Sloan-Kettering Cancer Center
Lines: 25
Distribution: world
NNTP-Posting-Host: zelenetz.ski.mskcc.org
X-UserAgent: Nuntius v1.1.1d20
X-XXMessage-ID: <>
X-XXDate: Thu, 15 Apr 93 16:05:44 GMT
We have recently obtained a Centris 610 and it has developed an unusual
video problem.
Model: 610 with 8 MB/230 HD, 512K VRAM, no cards
Monitor: Apple 16"
When the computer is set for 256 colors and certain operations are done,
particularly vertical scrolling through a window, horizontal white lines
appear on the monitor . These lines accummulate as the operation is continued. If a
window is moved over the involved area of the screen and then moved away
the line disappear from that area of the screen. This problem is not
observed if the monitor is configured for 16 colors or a 14 inch Apple
monitor with 256 colors is used.
I suspect a bad video RAM chip but cannot be certain. The problem has
been apparent since day 1 but has gotten worse.
We were wondering if anyone has seen anything like this, and if so, how
to fix it. Please also respond to Thank you
for your help.
Andrew Zelenetz
Molecular Biology Program
Memorial Sloan-Kettering Cancer Center
| comp.sys.mac.hardware |
ftp site for Radius software???
Organization: Electrical and Computer Engineering, Carnegie Mellon
Hey All,
Does anyone know if I can ftp to get the newest version of Radiusware
and soft pivot from Radius? I bought a pivot monitor, but it has an
old version of this software and won't work on my C650, and Radius said
it would be 4-5 weeks until delivery.
Thanks!
-Chuck
| comp.sys.mac.hardware |
5.25" MO sectors/track?
Organization: The Portal System
Distribution: world
Lines: 8
On an ISO/ANSI-standard 5.25" magneto-optical disc, how many sectors
are there per track , and how many tracks per
disc?
Thanks,
Jim Frazier
| comp.sys.mac.hardware |
Re: Quadra 900/950
Organization: The World Public Access UNIX, Brookline, MA
Lines: 26
writes:
> writes:
>> writes:
>>>Quarda 900 is a popular misspelling of Quadra 900, which has a 25 MHz 040
>>>processor. The 950 has a 33 MHz 040, and some local buses on the
>>>motherboard run faster.
>>The video is different also. The 950 can run a 13" and I believe a 16"
>>monitor in 16 bit color without a VRAM upgrade.
> Actually, you could put as much VRAM into a Q900 as you want and you
>still won't be able to get 16-bit color, on any monitor. It's not part
>of the on-board video. The Q950, however, can use 16-bit video on
>monitors up to 19" with 2MB of VRAM.
>-Hades
Yes, but if you upgrade the VRAM in a 900 you get 24 bit color. So
you really don't care. My point is that out the box the 950 has
more video capability for the same size monitors. The 900 can
do 24 bit with both 13" and 16", doesn't support 19", and
does 8 bit on 21" monitors.
| comp.sys.mac.hardware |
Distribution: world
Organization: BMUG, Inc.Re: x86 ~= 680x0 ??
Lines: 11
The real question here in my opinion is what Motorola processors running system
7 on a MAC are comparable to what Intel processors running Windows on a PC? I
recall there being a conversation here that a 486/25 running Windows benchmarks
at about the same speed as 25Mhz 030 in system 7. I don't know if that is
true, but I would love to hear if anyone has any technical data on this.
-David
**** From Planet BMUG, the FirstClass BBS of BMUG. The message contained in
**** this posting does not in any way reflect BMUG's official views.
| comp.sys.mac.hardware |
Good display card for 14" multisync?
Nntp-Posting-Host: lk-hp-20.hut.fi
Reply-To:
Organization: Helsinki University of Technology, Finland
Lines: 20
Hi there!
I wonder if anyone knows and can recommend me a good NuBus display
card for driving a 14" multisync ?
The NEC 3D can do horizontal refresh from 15.5 kHz to 38 kHz and
vertical from 50 Hz to 90 Hz and can do max 1024x768 interlaced,
though I am looking for something more like 800x600 or 832x624
noninterlaced.
It would be very nice to find a card which can be programmed quite
freely within these limits and is capable to display at least
8bits/pixel, preferably more.
Is there anything on the market that comes even close?
Thanks
--
Jartsu
| comp.sys.mac.hardware |
Can I remove the 68000 under my daughterboard upgrade?
Organization: Occidental College, Los Angeles, CA 90041 USA.
Lines: 26
The subject says what I would like to do, here are the details:
I have a 512ke with the MacRescue upgrade board that makes it the
equivalent of a Plus .
The MacRescue board clips onto the 68000 on the MB. It also has
a 68000 itself. Periodically I have to remove the clip and clean the "legs" of the 68000.
Larry Pina's book asserts that this is occasionally a problem with
snap on upgrades: the 68000's "legs" will oxidize, causing
unusual system errors.
Well, that's me.
So, I would like to do something permanent, and I think it would be
fairly easy to put a socket in where the 68000 currently is, and
modify the MacRescue board to plug in. What I'm not 100% sure of
is whether it will work. It seems to me that the two 68000s aren't
acting independently; so removing one shouldn't have any effect on
the performance of my Mac. I'm about 97% sure.
Will someone provide the extra 3%?
Erik
| comp.sys.mac.hardware |
Re: Adding int. hard disk drive to IIcx
Organization: University of Washington
Lines: 15
NNTP-Posting-Host: carson.u.washington.edu
Keywords: Mac IIcx, internal, hard disk drive, SCSI
Yes, it is possible to add a second hard drive to a mac IIcx internally. This
is definitely not a recommended procedure by Apple but I have done the equivalent to my CX after upgrading it to a Quadra 700. The power supply is still the
stock CX's and it was able to power two Quantum LPS drives, a PLI SCSI
accelerator, a Micron technologies 24 bit video board, Daystar QuickCache,
New Technologies Overdrive and 20 meg of RAM simultaneously.
I added a new mount for the drive by attaching angle brackets to the drive
tower. The internal SCSI cable was changed to a longer flat ribbon cable onto
which I added an extra connector about midway. The final HD was internally
terminated and the drive between the motherboard and final HD had its terminator resistor packs removed. Cooling has not been a problem and no SCSI problems
occur with either the PLI SCSI chain or motherboard SCSI hooked into the two
internal hard drives.
It works very well for me, but proceed cautiously if you wish to do the same.
| comp.sys.mac.hardware |
NTSC and th
Nntp-Posting-Host: idt114
Organization: Morgan Stanley & Company
Distribution: comp
Lines: 0
| comp.sys.mac.hardware |
Re: HP DeskWriter 550C...Opinions? Feedback!
In-Reply-To: 's message of 14 Apr 93 14:22:39 GMT
Reply-To:
Organization: AI Lab, The University of Michigan
<>
Lines: 16
I like it a lot. It is worth the additional expense. The only problem I
found is with MS Word . If you have a table the is longer than
a page and the cells have a visible border, the last
line on the first page will be missing. It makes no difference how
the table is formatted. The worst is that it doesn't show up in word's
page view or page preview.
--
Arie.
=========================================================================
| Arie Covrigaru | University of Michigan AI Lab |
| Phone: 994-8887 | Room 149, Advanced Technology Bldg. |
| Internet: | 1101 Beal Ave., Ann Arbor, MI 48109 |
=========================================================================
| comp.sys.mac.hardware |
Re: Why does Apple give us a confusing message?
Organization: University of Illinois, Dept. of Comp. Sci., Urbana, IL
Lines: 16
writes:
>In <> writes:
>>Does anyone know why Apple has an ambiguous message for C650 regarding
>>fpu? In all Mac price lists I've seen, every C650 as the message "fpu:
>>optional". I know from what we've discussed in this newsgroup that all
>>C650 have the fpu built in except the 4/80 configuration. Why would they
>>be so unclear about this issue in their price list?
>Perhaps the reason is simple--maybe the marketing people who put together
>the brochures and price lists weren't clear on the FPU issue.
Perhaps the marketing people don't KNOW what an FPU is!
-Terry
| comp.sys.mac.hardware |
Removable Storage
Organization: USC Department of Computer Science
Distribution: comp
Lines: 16
We have a Quadra 700 with 170MB HD, but need to a lot of sound sampling
for auditory research. What would be the best type of removable media for
storing these audio clips?
Ron
==============================================================================
| 'They say I'm lazy, but |
| it takes all my time... |
| Life's been good to me so far!' -Joe Walsh |
|----------------------------------------------------------------------------|
| Ron Pritchett Internet: |
| FidoNet: Ron Pritchett @ 1:376/74.0 |
==============================================================================
| comp.sys.mac.hardware |
Quadra Clock Chipping Works
Organization: University of Washington
Lines: 11
NNTP-Posting-Host: carson.u.washington.edu
Summary: Quadra Clock Chip Swap Success
Keywords: Quadra,clock,accelerate
After reading reports from Germany of success in accelerating a Quadra
or Centris simply by changing the clock oscillator, I decided to test the
claim. I pulled out my Variable Speed Overdrive and the motherboard's
50 mhz clock chip. I put a socket in the clock's place and inserted a
64 mhz TTL clock oscillator I had left over from working on some SI's.
I can't believe it. It actually works. I'm not getting SCSI timing errors
either. This is only after a short run time but I'll keep posting results.
Did I spend all that money on the VSO for nothing? If this keeps working,
the lack of a double boot in itself will be worth the effort.
Guy Kuo <>
| comp.sys.mac.hardware |
Re: x86 ~= 680x0 ??
Distribution: usa
Organization: University of Illinois at Urbana
Lines: 59
writes:
> writes ...
>>I'm sure Intel and Motorola are competing neck-and-neck for
>>crunch-power, but for a given clock speed, how do we rank the
>>following :
>> 486 68040
>> 386 68030
>> 286 68020
>040 486 030 386 020 286
How about some numbers here? Some kind of benchmark?
If you want, let me start it - 486DX2-66 - 32 SPECint92, 16 SPECfp92 .
>>While you're at it, where will the following fit into the list:
>> 68060
>> Pentium
>> PowerPC
>060 fastest, then Pentium, with the first versions of the PowerPC
>somewhere in the vicinity.
Numbers? Pentium @66MHz - 65 SPECint92, 57 SPECfp92 .
PowerPC @66MHz - 50 SPECint92, 80 SPECfp92 .
>>And about clock speed: Does doubling the clock speed double the
>>overall processor speed? And fill in the __'s below:
>> 68030 @ __ MHz = 68040 @ __ MHz
>No. Computer speed is only partly dependent of processor/clock speed.
>Memory system speed play a large role as does video system speed and
>I/O speed. As processor clock rates go up, the speed of the memory
>system becomes the greatest factor in the overall system speed. If
>you have a 50MHz processor, it can be reading another word from memory
>every 20ns. Sure, you can put all 20ns memory in your computer, but
>it will cost 10 times as much as the slower 80ns SIMMs.
Not in a clock-doubled system. There isn't a doubling in performance, but
it _is_ quite significant. Maybe about a 70% increase in performance.
Besides, for 0 wait state performance, you'd need a cache anyway. I mean,
who uses a processor that runs at the speed of 80ns SIMMs? Note that this
memory speed corresponds to a clock speed of 12.5 MHz.
>And roughly, the 68040 is twice as fast at a given clock
>speed as is the 68030.
Numbers?
>--
>Ray Fischer "Convictions are more dangerous enemies of truth
> than lies." -- Friedrich Nietzsche
--
Ravikumar Venkateswar
A pun is a no' blessed form of whit.
| comp.sys.mac.hardware |
"Altan J. Stalker" <>SE/30 Hard Drive Problem
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Organization: Indiana University
Mime-Version: 1.0
Content-Length: 1161
Lines: 33
I have an SE/30 with a 80 meg HD which dates back to April 1989. When I
originally purchased it, I experienced the failure to boot problem. This
was fixed soon after by a ROM upgrade on the hard drive.
Lately a similar problem has been occuring. When the computer is
powered on the HD light flashes a few times and then I am given
the "no disk to boot from" icon. However, upon turing the
computer off and on again the drive ALWAYS boots up just fine.
Furthermore, if instead of turning the power on and off I press the reboot
button the same problem occurs. But, as I said, turning the power
off and on always works.
This problem is different from the 1989 boot problem in that before
it often required several power off and ons to get it to boot.
Does anybody have any suggestions as to what the problem is or how
it can be fixed?
I'm wondering if it's getting old and requires more time to
"come up to speed" now. Is there a PRAM or SCSI setting that
allows me to tell the computer to wait a little longer before
trying to access the HD?
Thanks!
Altan J. Stalker
Indiana University
Computer Science Dept.
| comp.sys.mac.hardware |
Alexander Samuel McDiarmid <[email protected]>Re: Centris 610 Video Problem - I'm having it also!
Organization: Sophomore, Mechanical Engineering, Carnegie Mellon, Pittsburgh, PA
Lines: 40
Distribution: comp
NNTP-Posting-Host: po3.andrew.cmu.edu
In-Reply-To: <>
re: Centris 610 Video Problem - I'm having it also!
Date: Sat, 17 Apr 1993 03:17:45 GMT
> When the computer is set for 256 colors and certain operations are done,
> particularly vertical scrolling through a window, horizontal white lines
> appear on the monitor . These lines accummulate as the operation is continued. If a
> window is moved over the involved area of the screen and then moved away
> the line disappear from that area of the screen. This problem is not
> observed if the monitor is configured for 16 colors or a 14 inch Apple
> monitor with 256 colors is used.
>
> I suspect a bad video RAM chip but cannot be certain. The problem has
> been apparent since day 1 but has gotten worse.
I'm having exactly the same problem. Again, it's fine when I switch to 16
colors or a smaller monitor. My configuration is:
Model: Centris 610 with 4 MB/80 HD, 512 VRAM, no cards
Monitor: MAG MX15F with 16" monitor adaptor
I just discovered the problem a little while ago after plugging in my
new MAG monitor. It seems to appear either when scrolling through a
window or when using Alpha or Word and I enter <return>.
My guess is bad VRAMs as well. I really hope it isn't a design flaw. Is
anyone at Apple listening?
Pushpinder Singh
***********************************
Try finding an init called Basic color monitor. This should clear
up some probs with Centris 610's and vga type monitors. I know it
exists, somewhere I have a binhexed copy, but I don't know where and
never got around to installing it. I have this problem on my sony 1604.
-A.
| comp.sys.mac.hardware |
Thanks Apple: Free Ethernet on my C610!
Article-I.D.: pion.Apr.6.12.05.34.1993.11732
Organization: Rutgers Univ., New Brunswick, N.J.
Lines: 26
Well, I just got my Centris 610 yesterday. It took just over two
weeks from placing the order. The dealer
appologized because Apple made a substitution on my order. I ordered
the one without ethernet, but they substituted one _with_ ethernet.
He wanted to know if that would be "alright with me"!!! They must
be backlogged on Centri w/out ethernet so they're just shipping them
with!
Anyway, I'm very happy with the 610 with a few exceptions.
Being nosy, I decided to open it up _before_ powering it on for the first
time. The SCSI cable to the hard drive was only partially connected
. No big deal, but I would have been
pissed if I tried to boot it and it wouldn't come up!
The hard drive also has an annoying high pitched whine. I've
heard apple will exchange it if you complain, so I might try to get
it swapped.
I am also dissappionted by the lack of soft power-on/off. This
wasn't mentioned in any of the literature I saw. Also, the location
of the reset/interupt buttons is awful. Having keyboard control for
these functions was much more convenient.
Oh, and the screen seems tojump in a wierd way on power-up.
I've seen this mentioned by others, so it must be a...feature...
Anyway, above all, it's fast. A great machine at a great price!
| comp.sys.mac.hardware |
Trying to find a reliable Power Center for MACS
Article-I.D.: bme.1993Apr15.222020.4004
Organization: Biomedical Engineering and Applied Therapeutics, CCF
Lines: 18
Hi There,
I am trying to find out a reliable Power Center, it is basically
a surge protector that sits below the monitor and has individual control
for each outlet. Some people have an opinion that none of them work well.
The ones that I could locate in Microcenter catalogue were:
Tripp Lite's Isobar Command COnsole
Proxima Power Director
Kensington Masterpiece Plus
Has anyone used one of these? Could you please send me your feedback
on these?
thanks
-shalabh
| comp.sys.mac.hardware |
Centris 650 Math CoProcessor option
Organization: The Portal System
Distribution: usa
Lines: 21
Sorry if this is a FAQ. I don't normally read comp.sys.mac.hardware.
I am purchasing a couple of Centris 650's. I configured the systems
as follows:
Eight Mb RAM
Ethernet
1 Mb VRAM
Math CoProcessor option
My purchasing agent told me about the math coprocessor option and sent
me the Apple summary documentation to prove it. I ordered the coprocessor
option, but I'm really not sure that we needed it. I thought the '040 chip
had a math coprocessor built into it. Has Apple had a math coprocessor chip
architectured to keep up with the speed of the '040 chip in the Centris 650?
I am concerned that I may have set up a hardware bottleneck. Please send your
responses to: I will summarize if there
is enough interest. Thanks!
-- David Guevara,
Internet:
| comp.sys.mac.hardware |
Token Ring Cards for Macs
Nntp-Posting-Host: mutsu.rc.rit.edu
Organization: RIT Research Corp
Distribution: usa
Lines: 6
I am looking for recommendations/experiences of bringing Macintosh CPUs
onto Token-Ring Nets. Can someone point me in the right direction for
information.
Thanks in advance.
-Tom
| comp.sys.mac.hardware |
Re: Recommendations for removable storage media wanted
Lines: 25
Nntp-Posting-Host: ricks
Reply-To:
Organization: Digital Equipment Corporation
X-Newsreader: mxrn 6.18-2
In article <> you write:
|>>After having used both Syqyest and Bernoulli's, I most enthuiastically
|>>recommend
|>>Bernoulli's. Syquests are much slower, prone to
|>>cartridge
|>
|>What does your friends have? Buy it.
|>
|>If you have no friends, buy a 128 MB optical and stop
I bought a Bernoulli 90pro drive last year after comparing it with lots of
diffrent storage solutions,
OPTICAL drives are SLOW, very slow compared to 13 to 19ms access of Bernoulli.
Since I needed additinol online storage , I choosed Bernoulli drive. I use Adobe Preimere and Quicktime movies
alot. you ran out of storage real fast.
IMHO, the best buy currently is the Bernoulli 150Multidisk. 150MB per cartridge
Homayoon Akhiani "Turning Ideas into ... Reality"
Digital Equipment Corporation "Alpha, The New Beginning"
77 Reed Rd. Hudson, MA 01701 "All Rights Reserved. Copyright1993"
Email: "The words are mine, and not my employer"
| comp.sys.mac.hardware |
VGA monitors and the mac LC series of computers
Organization: University of Regina
Lines: 9
I recall reading that the Mac LC can use stand
ard VGA monitors, with appropriate cable adapters. I am uncertain of this sinc
e I have asked other people who say this is not so. So can all vga monitors be
used on the Mac LC? What are the specs needed for a PC monitor to work with a
Mac LC ?
| comp.sys.mac.hardware |
Re: Quadra SCSI Problems???
Organization: University of Washington School of Law, Class of '95
Lines: 21
NNTP-Posting-Host: stein2.u.washington.edu
Keywords: Quadra SCSI APS
> ATTENTION: Mac Quadra owners: Many storage industry experts have
> concluded that Mac Quadras suffer from timing irregularities deviating
> from the standard SCSI specification. This results in silent corruption
> of data when used with some devices, including ultra-modern devices.
> Although I will not name the devices, since it is not their fault, an
> example would be a Sony 3.5 inch MO, without the special "Mac-compatible"
> firmware installed. One solution, sometimes, is to disable "blind writes"
This doesn't sound right to me. Don't Quadras use the 53C96? If so, the
Mac has nothing to do with the SCSI timing. That's all handled by the
chip. About the only the timing could be wrong is if Apple programs the
clock registers wrong on the 96. That, however, should only really hurt
synchronous transfer, which is not used by the Mac SCSI Manager.
Furthermore, disabling blind writes should be meaningless on a Quadra.
On Macs that used the 5380, which is a much lower level SCSI chip, the
Mac was responsible for the handshake of each byte transferred. Blind
mode affected how the Mac handled that handshake. On the 5396, the
handshake is entirely handled by the chip.
--Tim Smith
| comp.sys.mac.hardware |
Re: My IIcx won't turn on...
Nntp-Posting-Host: aix02.ecs.rpi.edu
Lines: 7
I've changed the battery in the thing and I've noticed an inordinate number of Bus errors lately...
T.J. Pilon
| comp.sys.mac.hardware |
PB questions...
Organization: Purdue University Engineering Computer Network
Distribution: usa
Lines: 36
well folks, my mac plus finally gave up the ghost this weekend after
starting life as a 512k way back in 1985. sooo, i'm in the market for a
new machine a bit sooner than i intended to be...
i'm looking into picking up a powerbook 160 or maybe 180 and have a bunch
of questions that somebody can answer:
* does anybody know any dirt on when the next round of powerbook
introductions are expected? i'd heard the 185c was supposed to make an
appearence "this summer" but haven't heard anymore on it - and since i
don't have access to macleak, i was wondering if anybody out there had
more info...
* has anybody heard rumors about price drops to the powerbook line like the
ones the duo's just went through recently?
* what's the impression of the display on the 180? i could probably swing
a 180 if i got the 80Mb disk rather than the 120, but i don't really have
a feel for how much "better" the display is . could i solicit
some opinions of people who use the 160 and 180 day-to-day on if its worth
taking the disk size and money hit to get the active display? .
* how well does hellcats perform? ;)
thanks a bunch in advance for any info - if you could email, i'll post a
summary (news reading time is at a premium with finals just around the
corner... :
--
Tom Willis \ \ Purdue Electrical Engineering
---------------------------------------------------------------------------
"Convictions are more dangerous enemies of truth than lies." - F. W.
Nietzsche
| comp.sys.mac.hardware |
FORSALE: RADIUS Precision Color 24x Video Card
Organization: HP Colorado Springs Division
Lines: 22
NNTP-Posting-Host: hpcsrc13.col.hp.com
I have a Radius Precision Color 24x video card for the Mac that fits in a
NuBus slot. The card has 3 Mb of VRAM on it, which means that 24-bit color
is possible on the card! The card supports just about any monitor scan
rate you can think of . You can switch resolutions and depth on the fly with a
software control panel.
This is the ACCELERATED version of the card, which means all QuickDraw
calls are not executed by the CPU but taken over by the video card, freeing
up the mac processor for other tasks.
The cheapest I could find this card for when I called around last night
was $1738 at Mac's Place. I will sell it for $1250 + shipping. It is just
over a year old and never been any problem. It comes with software and the
original manuals.
Hurry!
Chris Magnuson
Hewlett-Packard Company
590-2963
| comp.sys.mac.hardware |
Re: LC III NuBus Capable?
Reply-To:
Organization: Dartmouth College, Hanover, NH
Disclaimer: Personally, I really don't care who you think I speak for.
Moderator: Rec.Arts.Comics.Info
Lines: 12
writes:
>My friend recently purchased a LC III and he wants to know if there is
>such a demon called NuBus adapter for his PDS slot? CompUsa and
>ComputerCity Supercenter says they don't carry them.
>Does this mean LC III is incapable of carrying a NuBus board?
Yes. That is exactly what it means. The LC family of Macs can only
use PDS cards. They are not able to use NuBus.
-Hades
| comp.sys.mac.hardware |
Re: HD Setup Partition (Was: OK to set 54 lbs on top of Centris 610???
Nntp-Posting-Host: bcarm422
Organization: Bell-Northern Research
Lines: 21
In article <>,
wrote:
>
>
> Now if I can figure out if there's any hope using the "partition" button
> on the hard disk setup utility ,
> then maybe I can divide up the wealth among the family members a bit more
> securly. The "getting more information" section of the manual suggested
> trying other avenues before calling Apple, but didn't mention the net.
> --
> Mike Feldman, Motorola Computer Group, 384-8538, FAX 384-8550
> 1101 East University Avenue Pager in IL 302-7738, 351-0009
> Urbana, IL 61801-2009 !udc!feldman
The Partition button in Apple's HD Setup lets you set up A/UX and other
types of partitions. It WON'T let you create more than one normal mac
volume. You need SilverLining or something similar to do that. It WILL,
however, allow you to take advantage of some possible unused space on your
hard disk, if you don't mind reformatting the whole thing.
Chris Ellens
| comp.sys.mac.hardware |
what size vram simm is this?
Nntp-Posting-Host: aix02.ecs.rpi.edu
Lines: 20
Hi everyone. I recently posted about how I received a bad vram chip for my
new LCIII, and someone responded that it may not actually be bad, but it may
be a 512K LC vram chip, and thus doesn't work properly with my computer. So
I'm wondering if anyone can interpret these codes for me, so I can figure
out what type of chip MacConnection sent me.
Each chip says: M518121A-80J
2515251
On the back of the card, it says 0593
I believe from the numbers that means it is an 80ns chip, but I can't figure
out what the size is supposed to be. If anyone can help, I'd be grateful.
Please email me your response. Thanks a lot!
--
Hillel Sims ----- ----- Rensselaer Polytechnic Institute
"Is rot13 rotated 13 forward or backward?"
--Anonymous
| comp.sys.mac.hardware |
Re: [ NETWORKING ] How to get 10 Ma
Organization: Royal Institute of Technology, Stockholm, Sweden
Lines: 24
Nntp-Posting-Host: hemul.nada.kth.se
In <> writes:
>networked together using Appletalk and PhoneNet connectors. To chat we use a
>program called 'Broadcast'. With it we can send brief messages to all or
>selected machines within the network.
If you use System 7, you can use my application Zing which has
a 30 kB footprint
It is also compatible with the chat program "FishBomb" which allows
sounds and pictures as well.
Both are, as far as I know, freeware
and should be available on the normal services
Cheers,
/ h+
--
-- Jon W{tte, [email protected], Mac Hacker Deluxe --
This signature is kept shorter than 4 lines in the interests of UseNet
S/N ratio.
| comp.sys.mac.hardware |
Subject: Re: Mac OS on a 486!!!
Keith Whitehead <>
X-Mailer: rnMac Buggy, I mean Beta, Test Version
Lines: 45
In article <>, you write:
>
> hillman wrote:
> : [email protected]
> :
> : kind of slated wouldn't you say?) Who is going to throw all that to
the
> : side and get the Mac OS for 486???
Not Quite the point to be considdered here!
Fact: If/When Apple release system 7 then you will see shortly afterwards Apple no longer producing
Hardware...Look at Next with their NextStep486 to see what happens.
Who is going to pay Apples Prices when they can get the same thing cheaper
else where!
> : If Apple released this before windows 3.0 was released I'd be behind
them,
> : they missed the boat. So why is Apple continued development. Will it
> : support the P5 to its fullest capabilities? Run faster than Windows?
It
> : must do something significantly better than Windows and OS2 to warrent
> : being released.
No the continued develeopment is because there is becomming less and less
profit in Hardware, So the Next Step , is
to make the money in software , after all you can sell multiple pieces of software to ONE
hardware platform.
As you also said Windows is a nightmare for programmers, so will the
temptation to sell system 7 to a couple of MILLION dos users be too much
for Apple! .
--
==========================================================================
: :
: :
: Be thankfull that we dont get all the government we pay for! :
==========================================================================
| comp.sys.mac.hardware |
Sven Guckes <>Re: When is Apple going to ship CD300i's?
Originator:
X-Mail-Reader: Elm 2.4 PL21
Organization: Free University of Berlin, Germany
X-News-Reader: NN 6.4.13 #13
Lines: 18
writes:
>The CD300 is already shipping and has been shipping for
>quite awhile now.
>Demand for the units are high, so they are pretty rare.
Hm, I've got my CD drive since 921230.
>I've also heard rumors that they are bundled with a couple of CD's,
>but I can't confirm it.
Indeed, CDs are bundled with it.
You usually get nine CDs with demos of applications, games, photos, etc.
I have compiled a list of these and posted it to alt.cdrom.
I will post an updated version of this list RSN.
Sven :)
| comp.sys.mac.hardware |
Re: Increasing the number of Serial ports
Organization: Control Data Systems Inc.
Lines: 16
writes:
>Does anyone know if there are any devices available for the Mac which
>will increase the number of serial ports available for use
>simultaneously? I would like to connect up to 8 serial devices to my
>Mac for an application I am working on. I must be able to access each
>one of the independently.
Applied Engineering makes a NuBus card called the QuadraLink which is
a board that contains 4 serial ports, which I believe can be used
simultaneously. I'm not a user of one of these, but I have installed
a couple for people at work . Hope this helps.
--
Aaron Swiers
Control Data Corporation, Arden Hills MN
Electrical Engineering student, U of ND
| comp.sys.mac.hardware |
Monitor for LCIII
Keywords: LCIII monitor
Organization: MIPS Technologies, Inc.
Lines: 27
NNTP-Posting-Host: arctic.mti.sgi.com
Originator:
Hi folks
I'm planning to buy a LCIII but need advice on choosing a monitor.
What do people recommend for a decent 14"/15" monitor?
I'v looked at some ads and the spec for NEC 4FG/4FGe and the price is
within my budget, but could LCIII be able to use the various resolutions
available on 4FG ? Does LCIII only
support one resolution?
Also any recommendations for a reliable mail order place for LCIII or
monitors? Does anyone have experience with the following mail-order places?
SYEX EXPRESS
USA FLEX
Thanks,
jeff
--
Jeff Lian - or -
MIPS Technologies, Inc.
2011 N. Shoreline Boulevard
P.O. Box 7311 M/S 10L-175
| comp.sys.mac.hardware |
Re: Mac II SCSI & PMMU socket question
Organization: CS Dept, University of Texas at Austin
Lines: 29
Distribution: world
NNTP-Posting-Host: tokio.cs.utexas.edu
In article <1qkmb2$> writes:
>1. The Mac II is supposed to have a socket for the MC68851 PMMU chip. Could
>anyone let me know where that socket is on the motherboard. I have obtained
>a PMMU chip from a surplus store, and would like to install it onto
>my Mac II . But I cannot see the socket myself when I tried to
>install it.
The original Mac II had an Apple MMU chip installed which performs a subset
of the 68851's functions. If you look underneath your front left floppy
bay you will find three chips, all approximately the same size. One will
be the 68020, the next the 68881, and the third, approximately the same
size, will be the Apple chip. It is easy to spot because it has a 'hump'
in the middle of it.
Example:
-----------
/ \
--------------- ---------------
| |
| |
That and the Apple logo should make it easy to find.
Ben
| comp.sys.mac.hardware |
Laser Writer IINTX upgrade kit
Organization: Royal Melbourne Institute of Technology
Lines: 15
NNTP-Posting-Host: minyos.xx.rmit.oz.au
Could someone please tell me what a
LaserWriter IINTX upgrade kit is.
Its a small box, which has a bag inn it , seemingly
containing 6 chips and a IINTX manual.
The installation instructions are most informative and say, in full,
"This product must be installed by an Apple ........."
SO what does this do ? At first I thought it might be a NT to NTX
upgrade, but I thought that required an entirely new board.
Any info appreciated.
Doug.
| comp.sys.mac.hardware |
Re: Interesting ADB behaviour on C650
Nntp-Posting-Host: hemul.nada.kth.se
Organization: Royal Institute of Technology, Stockholm, Sweden
Lines: 23
In <> writes:
>I have heard of no such warnings from anybody at Apple. Just to be sure, I
>asked a couple of our technicians, one of whom has been servicing Macs for
>years. There is *no* danger of damaging logic boards by plugging and unplugging
>ADB devices with the power on.
The problem is that the pins in the ADB connector
are close to each other, and if you happen to bend the
cable a little while inserting it, you short the ADB
port. If you take it to an Apple Repair Centre, that
means a new motherboard
Same goes for serial ports
Cheers,
/ h+
--
-- Jon W{tte, [email protected], Mac Hacker Deluxe --
This article printed on 100% recycled electrons.
| comp.sys.mac.hardware |
Powerbook 140-180 Batteries
Organization: Dalhousie University, Halifax, Nova Scotia, Canada
Lines: 15
A quick query for Powerbook gurus:
Tom Spearman, in a post on alternative Powerbook battery options
mentioned that there exist 3 versions of their Powerbook 140-180
batteries: a 2.5 amp hour one , a 2.8 amp hour one,
and a 2.9 amp hour one . Anyone out there
know how to determine which of these a battery is? I looked at my
battery and there is no obvious exterior indication. I contacted
Tom Spearman who had gleaned the information from MacUser and he
didn't know either. Anyone out there know the answer?
Thanks!
Christopher Majka
BTW, if you can reply via EMail I would be grateful. I don't
often read this newsgroup. I will post a summary of answers.
| comp.sys.mac.hardware |
Re: Floptical Question
Organization: University of New Mexico, Albuquerque
Lines: 11
NNTP-Posting-Host: triton.unm.edu
In article <> writes:
>...the last time I looked, floptical disk
>weren't all that cheap, .
Flopticals have been available since the beginning of the year at $25
per floptical , and I have seen them advertised
in MacWEEK at $20 . For someone on a tight
budget, the fact that the minimal dollar increment for more storage is
less---$25 versus $60---sometimes matters.
| comp.sys.mac.hardware |
Video Display
Organization: Netcom Online Communications Services
Lines: 34
My mac monitor displays about 20 vertical lines when I use it.
It means that either my display memory goes wrong or monitor is bad
or video card is bad.
I checked my monitor, it works fine with other Mac.
I checked my video card, it's also fine.
I replaced all the RAMs, it still didn't give me right answer.
Hence I assume something wrong with some part of my motherboard.
I don't know hardware architecture of the Macintosh.
Can anyone tell me what's the problem ????
It's a Mac IIcx.
MANY THANKS IN ADVANCE.
--
--------------------------------------------------------------------------------
My Name: Kuan, Yihpyng
Born: Taichung, Taiwan, R.O.C.
Work Phone: 415-688-6774
Company: Failure Analysis Associates, Inc.
149 Commonwealth Drive, P.O. Box 3015
Menlo Park, CA 94025
My Philosophy:
Where there is a will, there is a way!
| comp.sys.mac.hardware |
Peter Hansen <>Re: Help: 2 internal HDs in Mac II?
X-Xxdate: Tue, 6 Apr 93 11:17:54 GMT
Nntp-Posting-Host: bcarm382
Organization: BNR
X-Useragent: Nuntius v1.1.1d17
Lines: 54
In article <> Kurt Netzer,
writes:
>Is it possible to install a 2nd 3 1/2" 100 MB HD in a Mac II with a
>5 1/4" 40 MB Qunatum HD?
>Can i us a 50 pin cable with 3 connectors for the internal motherboard
>SCSI-Connector and the 2 SCSI-HD Connectors. The first HD is'nt
terminated
>the second will be.
>Whats about the power supply. Where can i connect a 3 1/2" AMP-Connector
>to supply my 3 1/2" HD?
It is very possible to connect another internal hard disk in any
macintosh if you can find the space to put it. I have a IIsi that came
with a Quantum 80 meg drive. When I ran into space problems, I slapped in
another 40 meg quantum that I had sitting on a shelf. Here is what I did.
First off, I was concerned about space. Since both drives are Quantum
quarter height drives, I finally decided that the logical place for them
was stacked one upon the other. Fine, they fit snugly. (I have not had a
problem with heat yet, and these drives have been running together for
over two months.
The next problem was connecting the drive. If you have a spare internal
hard disk power cable as I did, then half of your troubles are over. just
splice in the extra cable so that you get one square motherboard
connector and two hard disk power connectors. If you don't have a spare
cable, you will have to buy the wires and connectors which can be found
in any good electronics store for about $10. I would suggest properly
soldering/heatshrinking the connections to reduce the possibility of
shorts or bad connections.
Next, you need a ribbon cable connection. Again, I had a spare hard disk
ribbon cable, and I wanted to be careful in case this didn't word so what
I did was purchase a crimp on 50 pin cable connector that gave me another
male connector in the middle of my spare cable. The part cost $10 again,
and is easily attached with any good wood vice. The theory behind using a
crimp on connector is that if this doesn't work, my original cable is not
damaged, and I can go back to the original setup.
Having done all that, I couldn't be bothered to check the dev notes for
power consumption so I plugged it in and it works like a charm to this
day.
In a mac II, everything should work the same. Be careful with the ID's of
the drive, and ensure that the terminating resistors on both drives are
intact. I did not try this without the terminating resistors but it
seemed logical that if I am splitting the SCSI chain, that the signal
should be terminated at all the ends.
Let me know if you have any more questions.
Peter Hansen
Bell Northern Research
| comp.sys.mac.hardware |
Re: Desktop rebuild and Datadesk keyboard?
Organization: University of Illinois, Dept. of Comp. Sci., Urbana, IL
Lines: 15
writes:
>Similarly, I have trained myself to hold down the RIGHT-HAND pair of
>command-option for desktop rebuilds.
I tried the right set and it didn't work. I'm on the phone to their
tech support right now and the guys doesn't know what a desktop
rebuild is!!! He's got me holding for someone else...............
And holding, and holding, and holding.
Ok they finally got back to me and said basically "it should work".
Well it doens't and they don't know why. Guess it will go back to
MacConnection and I'll buy something else. I've got better things
to do than play musical keyboards.
-Terry
| comp.sys.mac.hardware |
Memory in Plus&SE
Organization: Temple University
Lines: 8
Nntp-Posting-Host: vm.temple.edu
X-Newsreader: NNR/VM S_1.3.2
I have to increase the memory in a Plus or SE . I did this a few years ago but I no longer have the
instructions. I forget which resistor needs to be cut to go from 1 to 4 Mbs.
Can anyone direct me to this information? Is there an ftp'able doc some-
where with diagrams?
Thanks, Dick Grant
| comp.sys.mac.hardware |
Subject: Snooper..any opinions
Keith Whitehead <>
Distribution: world
Organization: Apple Source BBS
X-Mailer: rnMac Buggy, I mean Beta, Test Version
Lines: 16
Has anyone use Snooper or MacEKG or any other similar diagnostic
software.Any comparisons/reviews on these products would be very much
appreciated.
Thanks in advance for your help
Cheers
--
==========================================================================
: :
: :
: Be thankfull that we dont get all the government we pay for! :
==========================================================================
| comp.sys.mac.hardware |
TCP/IP routing LocalTalk-Ethernet.
Organization: University of Michigan ITD Consulting and Support Services
Lines: 27
NNTP-Posting-Host: stimpy.css.itd.umich.edu
Here is the story:
I have a network with 4 Macs on Localtalk. One of them has an
Ethernet Card, and is currently connected to a NeXT . The NeXT is connected
to the internet over SLIP running on a 9600 baud modem.
Currently, we can telnet from the Mac w/ Ethernet to the NeXT,
and then telnet out again to the rest of the world.
What we want to know is if there is some sort of hardware that
will route telnet sessions from the Localtalk Macs to the NeXT
via the Ethernet Mac. From what we have heard, AIR doesn't do
the trick.
Software solutions would be good too, but my impression is that
there aren't going to be any.
Our immediate interest is to be able to get to the NeXT and telnet
out again. The SLIP connection doesn't allow us to assign IP numbers
to machines, so everyone shares that 1 number...oh well...
thanks in advance.
--
_______________________________________________________________
Benjamin S. Chuang/ITD-CSS Consultant/University of Michigan:A2
| comp.sys.mac.hardware |
Re: What to put in Centris 650 Internal Bay?
Organization: The World Public Access UNIX, Brookline, MA
Lines: 24
writes:
> writes:
>> writes:
>>>Yes, you get internal mixing of the analog CD-Audio outputs with
>>>the Mac generated audio on the Mac motherboard. Also you can sample
>>>the CD-Audio using the sound control panel by clicking on the Options
>>>button next to the microphone icon.
>>How do you click on the Options button? I've never seen it undimmed.
> The latest word on this is you have to disconnect the Microphone
>cable on the motherboard. Then the button is supposed to un-dim.
>-Hades
Sorry, I assumed that the the various new machines with the internal
CD-ROM bay worked the same as the Quadra 900. Obviously they don't.
I can use any of three inputs by changing the radio button under
the sound cp on my Quadra 900, Microphone, External, and CD-ROM. I
always leave the microphone plugged in .
| comp.sys.mac.hardware |
Re: Duo 230 crashes aftersleep
Nntp-Posting-Host: hqsun7.us.oracle.com
Organization: Oracle Corp
X-Disclaimer: This message was written by an unauthenticated user
at Oracle Corporation. The opinions expressed are those
of the user and not necessarily those of Oracle.
Lines: 33
Add me to the list of bugged 230 owners.
I had a bunch of problems regarding sleep/wakeup/restart with the 230 when
I first got it, both with and without the techworks ram. Finally it "died",
wouldn't start, until I opened the docking door and
the machine came up fine, but with the clock a few decades off. Apple
replaced the processor board.
Now,
twice the machine has frozen
twice the machine has refused to wake up. Acutally, the backlighting
came on, and the disk spins when the power adaptor is plugged in
.
The first time this happened removing both power adaptor and battery
for ~1 minute brought the machine back.
The second time this happened the machine wouldn't wake up until
powered down for about 30 minutes. The screen had what looked
like red horizontal lines accross it.
Both timse the file "fax modem preferences" has been corrupted
according to disinfectent).
I have removed all the fax and modem software, and the third party memory,
and am waiting to see if it happens again.
forrest
--
Forrest Howard
Oracle Corporation
500 Oracle Parkway
Box 65414
Redwood Shores, CA 94065
| comp.sys.mac.hardware |
DIY - PhoneNET, MIDI adapt & MacRecorder
Nntp-Posting-Host: lk-hp-18.hut.fi
Organization: Helsinki University of Technology, Finland
Distribution: comp
Lines: 7
I remember seeing complete instructions for making PhoneNET adapters,
MIDI adapters and a MacRecorder lookalike. After a short search through
Mac.archive and info-mac I failed to see any of the above. Any pointers?
--
"Supreme Court Ruling: Bolo is an Illegal Drug!"
"Computer Programmer Steals Minds of Youths Through New Tank Game!"
--pa----"Telephone Standards Rethought Because of New Addictive Computer Game!"
| comp.sys.mac.hardware |
*** HELP! Newly installed Falcon 2.21 bombs my SE!
Organization: University of Southern California, Los Angeles, CA
Lines: 30
NNTP-Posting-Host: phakt.usc.edu
HELP!
I just received my Falcon 2.2.1 upgrade from Spectrum Holobyte today.
My SE is running Sys 7.0.1 with 4mb of RAM. Like the instructions said, I only
installed Disk 2 .
I just downloaded Macsbug from ftp.apple.com like it said, and
installed it in my System folder. I restarted the mac an hour later, and it
wouldn't completely boot off the internal HD. I get the "happy mac", then it
disappears, only to reappear and repeat the cycle continuously. I never even
get the "Welcome to Macintosh" message. Norton utilities fixed about 12 new
problems, but the same thing still happened.
What do I do?
Please e-mail to ""
THANKS IN ADVANCE!!!
Victor Orly
;
--
|Victor R. Orly | "Try to imagine all life as you know it, |
|aka "Mr. Nitro Plastique" | stopping instantaneously, and every molecule |
|Univ. of Southern California | in your body exploding at the speed of light"|
|Internet: | -Egon Spengler, from "Ghostbusters" |
| comp.sys.mac.hardware |
Position of 'b' on Erg. Keyboard
Organization: DAIMI: Computer Science Department, Aarhus University, Denmark
Lines: 12
So far I have only seen pictures of the new ergonomic keyboard,
but it seems that the 'b' is placed on the left part after the split.
However, when I learned typing in school some years ago, I was taught
to write 'b' with my right hand. Is this a difference between Danish
and American typing, or what???
Thanks a lot in advance!
--
Thomas Widmann -Lernu Esperanton-
SOLIDVM PETIT IN LINGVIS
| comp.sys.mac.hardware |
Re: Upgrading PB170 Memory
Organization: Los Alamos National Laboratory
Distribution: usa
Lines: 18
In article <>,
wrote:
>
> I have one of the original Powerbook 170's and find
> that 4Mb is a drag when trying to do my work. So, what is the best way
> to get the maximum RAM for this unit, and what's it going to cost me?
> I'm hoping I can get the latest and best info from real users by posting
> to this group.
Well Bill, There are 2MB soldered on the logic board and 2MB in the RAM
expansion slot giving you 4MB. The only thing you can do to upgrade to
the maximum Ram is to remove the 2MB expansion and install a 6MB expansion,
giving you a total of 8MB which is the max on a 170....You can try calling
TechWorks, or any other memory vendors out of MacWeek, MacWorld...etc....
<==================================+==================================>
Peter Haase + Internet:
Network Manager + Los Alamos National Laboratory
| comp.sys.mac.hardware |
Re: x86 ~= 680x0 ??
Organization: Netcom. San Jose, California
Distribution: usa
Lines: 30
writes ...
> writes:
>>040 486 030 386 020 286
>
>How about some numbers here? Some kind of benchmark?
Benchmarks are for marketing dweebs and CPU envy. OK, if it will make
you happy, the 486 is faster than the 040. BFD. Both architectures
are nearing then end of their lifetimes. And especially with the x86
architecture: good riddance.
>Besides, for 0 wait state performance, you'd need a cache anyway. I mean,
>who uses a processor that runs at the speed of 80ns SIMMs? Note that this
>memory speed corresponds to a clock speed of 12.5 MHz.
The point being the processor speed is only one of many aspects of a
computers performance. Clock speed, processor, memory speed, CPU
architecture, I/O systems, even the application program all contribute
to the overall system performance.
>>And roughly, the 68040 is twice as fast at a given clock
>>speed as is the 68030.
>
>Numbers?
Look them up yourself.
--
Ray Fischer "Convictions are more dangerous enemies of truth
than lies." -- Friedrich Nietzsche
| comp.sys.mac.hardware |
Distribution: world
Organization: MacContent BBS, Doncaster, Victoria, Australia
Return-Receipt-To: Re: LC Ram Upgrade will be SLOW!
Lines: 9
Yes! what you are saying is absolutey true, but what you fail to mention is the
fact that the LCIII uses the new 72 pin simms which allow 32 bit access to
each simm. In the case of the LC III, it only has one simm slot, but accesses will
be 32 bits wides.
***************************************************************************
The views expressed in this posting those of the individual author only.
[BBS Number: 848-1346 MacContent is VictoriaÕs first Iconic BBS!]
***************************************************************************
| comp.sys.mac.hardware |
Re: HELP INSTALL RAM ON CENTRIS 610
Organization: University of Virginia
Lines: 8
I had asked everyone about problems installing a 4 meg
simm and an 8 meg simm in my Centris 610, but the folks at the
local Apple store called the folks in Cupertino and found that
you can't have simms of different speeds in one machine, even
if they are both fast enough - ie - My 80 ns 8 meg and 60ns 4
meg simms were incompatibable... Just thought people might
want to know.....
Jason.
| comp.sys.mac.hardware |
Re: Sampling CD audio
Organization: The World Public Access UNIX, Brookline, MA
Lines: 28
writes:
>In article <>, writes:
>> writes:
>>>
>>>Yes, you get internal mixing of the analog CD-Audio outputs with
>>>the Mac generated audio on the Mac motherboard. Also you can sample
>>>the CD-Audio using the sound control panel by clicking on the Options
>>>button next to the microphone icon.
>>
>> What's this? My IIvx with an internal CD doesn't have any "CD-Audio"
>> icon...
>I can't find any such option on my Centris 650 either. On the other hand, I
>don't see why I need one. If I try recording sound with the built-in
>microphone with an audio CD playing in the drive, I get the CD audio mixed
>in with the microphone sound.
>And I guess if I unplug the microphone, then I'll get uncontaminated CD
>audio .
Sorry about the misinformation. I made a bad assumption about
the new machines behaving like a Quadra 900, see previous
post. About sampling the CD audio though, have you tried it? I
found the aliasing to be really bad. Like it needed a filter or something.
Much worse than I expected. I installed the CD-300 in the
Quadra myself so maybe I missed something. Everything else
works great though.
| comp.sys.mac.hardware |
Re: Powerbook & Duo Batteries
Article-I.D.: ringo.ronaldw-050493173709
Distribution: na
Organization: SCO Developer Relations
Lines: 32
In article <>,
wrote:
>
> writes:
>
> >To my knowledge there is no way to fully discharge a Duo battery.
>
> The program PowerStrip2.0, which is freeware, has an option called
> "Quick Discharge." You can find it on the Mac archives, probably
> sumex-aim.stanford.edu or mac.archive.umich.edu.
>
> Good luck!
>
>
>
> --
> ----------------------------------------------------------------
> Kenneth Simon Department of Sociology
> Indiana University
> ----------------------------------------------------------------
Is it a hidden option? I'm using PowerStrip 2.0 right now
and can't find any quick discharge option. It definitely is on
mac.archive.umich.edu 'cause I submitted it!
______________________________________________________________________
Ron Wong The Santa Cruz Operation 408-427-7128
Net & Comm Segment Mgr/ 400 Encinal Street, PO Box 1900 FAX: 425-3544
DevProgram Marketing Mgr Santa Cruz, CA 95061-1900
E-mail: ...uunet!sco!ronaldw
______________________________________________________________________
| comp.sys.mac.hardware |
Replacing internal FDHD w/ floptical?
Organization: the Syllabub Sea
Lines: 13
NNTP-Posting-Host: cs.utexas.edu
Hi all,
I have a IIsi with a floppy drive that might be bad ) If the drive is not easily
reparable, I'd like to replace it with an _internal_ floptical. Can this
be easily done? Can it be done at all?
I'm assuming that floptical drives can read and write both 800k and 1.4k
floppies. If this is not in fact true, please tell me.
Thanks in advance,
~ Kiran
| comp.sys.mac.hardware |
Re: IIsi clock upgrade
Organization: Idaho State University, Pocatello
Lines: 47
Hi, I have been getting a lot of requests for this information so I thought
I would post it for those interested parties. .
To increase the MacIISi speed to 25MHz or 33MHz the clock must be changed
from 40MHz to 50MHz or 64MHz respectively.
This is done by going to a static-free work station or putting some
aluminum foil down to work on.
1. Open up the Si by lifting the tabs at the back of the case.
2. Remove the Hard Disk by disconnecting the power and SCSI cables,
spreading the tabs, and lifting the drive out.
3. Remove the flopy drive.
4. Remove the power supply by spreading the tab in front and lifting
the supply straight up and out.
5. Remove the fan by pressing the ears together at the back, bottom
side of the fan and lifting straight up and out.
6. Remove the Mother Board by spreading the tabs on the left and
right side of the board and sliding the board forward then
lifting the board out.
7. Desolder the 40MHz clock .
This is not easy even for a skilled solderer.
8. Get an IC socket with the round pins and remove four of the pins
by pushing them up from the bottom with long nose pliers.
9. Put the four pins in the holes vacated by the clock and solder
them in.
10.Insert a 50MHz or 64MHz clock.
11.Put large power transistor heat sink's on the processor chip and
the other large chip just to the right of the processor and
figure some way to hold the heat sync's in place. I made a
simple clamp by putting a four inch screw up through the hole
in the board between the two chips. Mount the screw using
insulated washers. Screw a cross member down over the heat
sync's to hold them in place. Don't use too much pressure.
12. Put it all back together and go-for-it.
Disclaimer: this is only the procedure I used and is not authorized by anyone.
You are on your own for this procedure. I'm quite sure it will
void your warentee.
Bye for now,
************************************************
Ralph Durtschi 236-3256
Idaho State University
EMAIL:
************************************************
| comp.sys.mac.hardware |
Re: Quadra 700 Sound
Organization: University of Tasmania, Australia.
Lines: 23
The Quadra 700 goes thru extensive initalize routines of its hardware,
read's PRAM, obtains all info from last session including the volume
setting, and then executes the sound procedure for the startup sound, and
wait's on the SCSI controller to respond to the boot up code.
If the DRAM produces an error, or a registers cannot be read from a device,
or the device corrupts that address/data or control paths, then if it is
possible, the firmware branchs to another sound routine that produces the
'sad mac' sound.
This is a general breifing of the start up procedure of a typical mac.
If you cannot control the volume of the quadra, even at boot up, then i feel
there is something incorrect with the logic board.
My Quadra 700 does not show the problems you are having.
Steve H
| comp.sys.mac.hardware |
Re: I want use DeskJet on System7
Nntp-Posting-Host: bcarh1ee
Organization: Bell-Northern Research Ltd., Ottawa
Distribution: comp
Lines: 30
In article <> writes:
>I used HP DeskJet with Orange Micros Grappler LS on System6.0.5.
>
>But now I update system 6.0.5 to System7 with Kanji-Talk 7.1,
>then I can not print by my DeskJet.
>Is the Grappler LS old ?
>Can I use DeskJet on System7 ?
>Please tell me how to use DeskJet on System7.
>Thank you
>--
>FROM JAPAN
I currently use an HP DeskJet with Grappler LS ver 1.0,
and it works on System7. Course, I only use the SWA Dutch
and SWA Swiss fonts that came with it, due to the 4x size
requirement to print to the HP. When I upgraded, I talked to Orange
Micro, and they state that ver 1.2 of Grappler LS definitely
works with System7. However, the upgrade was US$40, so I
passed.
Hope this helps?
<marc>
--
-----------------------------------------------------------------------------
Marc Donovan [Voice: 765-2868 Fax: 763-9250]
---- Disclaimer: I am the only one responsible for my opinions.
| comp.sys.mac.hardware |
Re: "Jump Starting" a Mac II
Organization: Microsoft Corp.
Distribution: usa
Lines: 5
Apple dealerships once had kits to replace the soldered in batteries with a battery
holder.
Real easy to install, but it does require some soldering.
| comp.sys.mac.hardware |
Re: PC Syquest on a Mac??
Organization: Drexel University
Lines: 19
In article <1qsk6u$> writes:
>
>Is it possible, ie via creative cable splicing or whatever, to
>hook a Syquest 44MB removable drive to a Mac?
>
>Is there any difference with the guts of the drive or is it
>just cable differences?
>
>Thanks.
>
>Rob
>--
>Rob Sprecher
>
Many Companies package Syquest drives for the mac already.... So unless you
are using one for the IBM world, Id buy a Mac ready Config.
J.
| comp.sys.mac.hardware |
Re: New Apple Ergo-Mouse
Reply-To:
Organization: Dartmouth College, Hanover, NH
Disclaimer: Personally, I really don't care who you think I speak for.
Moderator: Rec.Arts.Comics.Info
Lines: 19
writes:
>Does anyone know how to open up the Apple Ergo-Mouse ?
>Mine lives near a cat and picks up her fur. From what
>I can tell, it looks like Apple welded it shut.
You must not have tried very hard. I just opend mine in about 2
seconds. Take a look on the bottom, it has a dial that turns to open
much like the older ADB mouses used to have. It's a bit harder to turn
at first but it is quite simple to open.
>Also, does anyone know about installing FPUs in a Mac LC III? I've heard some
>people saying it has fried the motherboard of the LC III.
Well, if you don't match up the pins correctly you will have some
problems. A close look at the socket should give you an idea of the
proper orientation of the chip.
-Hades
| comp.sys.mac.hardware |
Apple CD300 CDROM "freebies".
Organization: GTE Govt. Systems, Electronics Def. Div.
Lines: 19
In article <1quod6$>, writes:
> ... reseller. I've also heard rumors that they are bundled with a couple of CD's,
> but I can't confirm it.
>
> Sunny ===>
I've got two CD300's... The first one i ordered Jan 15, and I received it Feb. 20.
The second one I ordered Jan 20th, and I just got it April 2nd or so. Anyway, they
both come with 10 misc. CDROMs... Things like a "Intro to Nautilis", a sample CD
of Kodak pictures, "From Alice to Ocean" , 3 discs from apple, a games disc, an applications disc, and a "titles"
disc . Also some "Cinderella" thing for kids,
a disc of Mozart something-or-others, etc. etc. etc. If someone's super interested,
I'll make a list of the exact titles and post them. They are all in the category of
"Interesting, but probably fairly useless...". It was rumored that the earliest
units shipped with SOME encyclocpedia , but neither of my drives had
that.
-jeff adams-
| comp.sys.mac.hardware |
Distribution: world
Organization: BMUG, Inc.DESI PB upgrade
Lines: 9
Does anyone know exactly how Digital Eclipse does their upgrades? Someone was
suggesting to me that some chips may not be able to perform at 33MHz. Is this
true, and if so, how does DESI deal with that?
-David
**** From Planet BMUG, the FirstClass BBS of BMUG. The message contained in
**** this posting does not in any way reflect BMUG's official views.
| comp.sys.mac.hardware |
[email protected] Re: Buying a high speed v.everything modem
Nntp-Posting-Host: pie9.mach.cs.cmu.edu
Organization: School of Computer Science, Carnegie Mellon
Lines: 38
In article <> writes:
>
>The AT&T Dataport earns nearly unanimous praises for reliability. They are
>backordered at the moment, probably because of the special $299 price in
>effect until May. Its fax capabilities are worse than that of the other two
>modems. WARNING: AT&T ads say that the modem comes with a Mac kit , and has lifetime warranty. This applies *only* when you order
>directly from Paradyne! I called ElekTek , and
>they wanted to charge me $16 for cable, and gave only 1 year warranty...
>
Hmm, I don't know where this information concerning the cable and the
warranty came from but I ordered mine from Logos Communications, near
Cleveland, and inside was a Mac cable )
and a lifetime warranty. The whole package was assembled at AT&T Paradyne,
and every piece had AT&T
part numbers on them, except the QuickLink software package and the
CompuServe intro kit.
>--
>Eric Behr, Illinois State University, Mathematics Department
> or
If anyone's interested, Logos number is 837-7777. I ordered mine
last Wednesday and got my modem on Friday, though it's not to far from
Cleveland to Pittsburgh.. :-) On the down side they only ship UPS COD.
- Chris
+--------------------------------------------------------------------------+
| Christopher P. Dingman |
| Electrical and Computer Eng. Dept. |
| Carnegie Mellon University 268-7119 |
| 5000 Forbes Ave |
| Pittsburgh, PA 15213 |
+--------------------------------------------------------------------------+
| comp.sys.mac.hardware |
Re: DCC and MiniDisc: next DAT/DDS like story?
Organization: Xenix Support, FICC
Lines: 15
In article <> writes:
> Another thing, why a SCSI interface ?
Because SCSI works well with removable media, and works well with large
capacity devices. The floppy interface you suggest handles the former, but
it doesn't have any hooks for dealing with the latter... you'd have to kludge
it. Plus, it's extremely low performance. AND, SCSI has gobs of room for
expansion compared with a floppy .
--
Peter da Silva `-_-'
Network Management Technologies Incorporated 'U`
12808 West Airport Blvd. Sugar Land, TX 77478 USA
+1 713 274 5180 "Zure otsoa besarkatu al duzu gaur?"
| comp.sys.mac.hardware |
Re: Stereo sound problem on mac games
Keywords: sound stereo, Quadra, 900, PowerBook, 170
Organization: Royal Institute of Technology, Stockholm, Sweden
Lines: 26
Nntp-Posting-Host: hemul.nada.kth.se
In <1qsfak$> writes:
>But, the following games only play out of the left channel:
...
>But still, STEREO system beeps do play in stereo, through BOTH speakers.
Mac sound hardware is diverse; some macs play in stereo and
mix the output while others play in
stereo but ONLY has the left channel for the speaker, while
some are "truly" mono
Developers know that stuff played in the left channel is
guaranteed to be heard, while the right channel isn't. Some
send data to both, some only send data to the left channel
Cheers,
/ h+
--
-- Jon W{tte, [email protected], Mac Hacker Deluxe --
Engineering: "How will this work?" Science: "Why will this work?" Management:
"When will this work?" Liberal Arts: "Do you want fries with that?"
-- Jesse N. Schell
| comp.sys.mac.hardware |
Re: SE rom
Organization: Defence Science and Technology Organisation
Lines: 45
NNTP-Posting-Host: mrl.dsto.gov.au
Gosh, I wish people would read the postings that they are 'following up' to.
In article <>, writes:
> writes:
>
>>In article <>, writes:
>>>
>>> Anyway, I was hoping someone knowledgeable
>>> about Mac internals could set me straight: is it simply
>>> impossible for a mac SE to print grayscale, or could
>
>>To use the grayscale features, I believe you need a Mac equipped
>>with colour quickdraw. I was told this somewhere or other, but it's
>
> I think you will find that the Mac SE can PRINT grayscale images, loaded
> with the proper software. However, the Mac SE cannot DISPLAY grayscale on
The original poster posted an item saying that he had bought a new
wizz-bang Laser Printer from Apple which can print
GrayScale. He then said that he CANNOT PRINT GRAYSCALE from his SE computer
.
This is the one major bugbear about doing a 3rd party SE upgrade : you will never be able to run Color Quickdraw. It
is Color Quickdraw that controls Color AND Grayscale.
SEs CAN print some COLOUR: this is because Quickdraw - the original, non-colour
version, has the right hooks for eight colours. Some of you will remember the
'SCSIgraph' solution to getting a colour screen for your SE .
There is no reason that Apple couldn't release software patches for older
computers - but they wont, and 3rd parties are having a difficult
time in duplicating the Mac's ROMs .
Just one Caveat: I would have thought that if you were printing a POSTSCRIPT
Grayscale image onto a POSTSCRIPT Grayscale printer, that you would be able to
do so, whatever Mac you were using. .
Phil Ryan
Melbourne, Australia
| comp.sys.mac.hardware |
Peter Hansen <>Re: 72-pin SIMMS, where?
X-Xxdate: Tue, 20 Apr 93 08:41:49 GMT
Nntp-Posting-Host: bcarm382
Organization: BNR
X-Useragent: Nuntius v1.1.1d17
Lines: 13
In article <> Steven Medley,
writes:
>I am looking for a 8 meg 72-pin SIMM for my Centris 610. Where is the
>best place to purchase one , and if
>possible, phone numbers so that I can order one as soon as possible.
Try Goldstar. They make them, and they are available immediately in Mac
configurations. I ordered a pair from Computerland and
they work like a charm. I've had them for two weeks.
Peter Hansen
Bell Northern Research
| comp.sys.mac.hardware |
Trade Mac SE system for Color Mac???
Article-I.D.: wixer.1993Apr16.181557.11264
Organization: Real/Time Communications
Lines: 31
Ok I want to get a color Mac I don't care if it is an LC or a Mac II or
what but I want to go to a color machine. I'd prefer to trade my
present Mac SE system plus some cash or other equipment for the color
system as right now I'm not full of the $$$ to buy a color system
outright.
Here's what my Mac SE system has...
Mac SE 4/20 with internal 800K drive
20 Meg external
External 800K drive
ImageWriter II with 4 color ribbon
Stuff that can go with it......
I've got 3 modems and I'd be willing to give 1 of the 9600's and the
2400 with the system
MultiTech Multimodem II
U.S. Robotics Sportster
Microcom QX/12K
The USR and the MultiTech are both brand-new
If interested send me e-mail at
--
| Primary: | Judy's Stamps (Misc. topical stamps. From Dogs..|
| | to cats to baseball and many many other subjects|
| Secondary: | For stamp information call Tony Leonard at......|
| | 837-0022 This is a business only number!!!|
| comp.sys.mac.hardware |
Ethernet to LocalTalk On a Quadra?
Article-I.D.: ncsu.1993Apr6.135521.22501
Distribution: na
Organization: North Carolina State University, Project Eos
Lines: 8
I have used both my serial ports with a modem and a serial printer,
so I cannot use Appletalk. Is there a Ethernet to Localtalk hardware
that will let me use the Ethernet port on my Q700 as a Localtalk
port. Until they come out with
satellite dishes that sit on your window & give you internet access
from your home, I won't at all be using that port.
Saurabh.
| comp.sys.mac.hardware |
Re: Calling all Mac gurus
Organization: University of California, Berkeley
Lines: 17
Distribution: world
NNTP-Posting-Host: web-3h.berkeley.edu
In article <1qvs9t$> Charles P. Cox, Jr. <> writes:
>Question for those familiar with Quadra VRAM:
>I put 2 256K VRAM SIMMs in my Quadra 700 and I got no results whatsoever. I have been told that
>the built-in video should support at least 16bit and maybe 24bit color on
>a Macintosh Color Display. However, the Monitors control panel still
>lists 8bit as the highest possible.
the Q700 will only do 8bit or 24bit color. if you want the higher
color depth, it's 2MB's of VRAM altogether for a monitor up to 16".
for a 21" monitor, you can get 8bit max.
hope this answers your questions.
James Wang.
| comp.sys.mac.hardware |
Subject: MAC to LaserJet IIIp
Nntp-Posting-Host: husc8.harvard.edu
Lines: 12
I have a friend who has a MAC , and her family has an
"extra" LaserJet IIIp sitting around. Is there any way to connect these
two and make them work without a postscript cartridge? She told me that a
random friend of hers had mentioned something about some software package
that could do the translation...
-Rick
--
+--------------------------------------------------------------------------+
| Rick Osterberg 617-493-7784 617-493-3892 |
| 2032 Harvard Yard Mail Center Cambridge, MA 02138-7510 USA |
+--------------------------------------------------------------------------+
| comp.sys.mac.hardware |
Sven Guckes <>Re: Looking for free/share wares
Originator:
X-Mail-Reader: Elm 2.4 PL21
Organization: Free University of Berlin, Germany
Distribution: comp
X-News-Reader: NN 6.4.13 #13
Lines: 14
writes:
>I am looking for ftp sites for Mac.
>It will help a lot if there are driver source codes in those ftp sites.
>Any information is appreciated.
F A Q !
Reference:
Newsgroups: comp.sys.mac.apps,comp.sys.mac.misc,comp.sys.mac.system,
comp.sys.mac.wanted,comp.sys.mac.hardware,comp.answers,news.answersIntroductory Macintosh frequently asked questions
Sven :)
| comp.sys.mac.hardware |
Re: TCP/IP routing LocalTalk-Ethernet.
Organization: NSWC
Lines: 32
In article <>,
wrote:
>
> Here is the story:
> I have a network with 4 Macs on Localtalk. One of them has an
> Ethernet Card, and is currently connected to a NeXT . The NeXT is connected
> to the internet over SLIP running on a 9600 baud modem.
>
> Currently, we can telnet from the Mac w/ Ethernet to the NeXT,
> and then telnet out again to the rest of the world.
>
> What we want to know is if there is some sort of hardware that
> will route telnet sessions from the Localtalk Macs to the NeXT
> via the Ethernet Mac. From what we have heard, AIR doesn't do
> the trick.
>
> Software solutions would be good too, but my impression is that
> there aren't going to be any.
>
> Our immediate interest is to be able to get to the NeXT and telnet
> out again. The SLIP connection doesn't allow us to assign IP numbers
> to machines, so everyone shares that 1 number...oh well...
>
What you need is a hardware router such as EtherRoute/TCP made by
Compatable Systems . This will allow you to connect your Localtalk
network to your Ethernet network . It will
route TCP/IP protocol between the two networks. Software routers are also
available for less money, but I'm not sure if they work with TCP/IP.
Paul
| comp.sys.mac.hardware |
asynch to synch on the mac
Nntp-Posting-Host: mondrian.csufresno.edu
Organization: California State University, Fresno
Lines: 8
does anyone have any good code to drive the serial port in syncronos
mode?
I really need it BAD
TIA
| comp.sys.mac.hardware |
Organization: University of Maine System
Jon Carr <>Pin map for 8pin-DIN cable?
Lines: 26
#### ####
# ### #
# 1 2 3 #
Facing # #
Female Plug End # 4 5 6 #
# #
# #
# 7 8 #
# #
#############
Anyone Recognize this? It's my little layout of a eight pin female plug
connector used for many mac peripherals.
#####Problem########Problem#########Problem########
Printer cables using this configuration switch a couple of
pins between one end and the other. I want to use cheap cables for an
A-B box. Anyone know which pins get reversed so I can do some
creative editing on the internals of my box? Any help would be
greatly appreciated.
-----> Jon Jon Carr
-----> UMaine '93
1993 NCAA Champions! How about those 42-1-2 Black Bears!!
M - A - I - N - E - GO BLUE!!!!!!!!!!
| comp.sys.mac.hardware |
monty% PowerBook 170 4/40
Expires: Mon, 26 Apr 1993 00:43:13 GMT
Reply-To: Monty Solomon <roscom!>
Organization: Proponent
Lines: 8
The PowerBook 170 4/40 with Fax/Data modem is available thru CitiBank's
CitiDollars catalog for $1995.00 + $19.95 S/H .
The modem is 2400 bps data, 9600 bps fax .
--
# Monty Solomon / PO Box 2486 / Framingham, MA 01701-0405
# monty%
| comp.sys.mac.hardware |
When is Apple going to ship CD300i's?
Nntp-Posting-Host: 223.8.248.12
Organization: Motorola Inc, Austin, Texas
Lines: 12
I would really like to get one of the new CD300i CDROM
drives for my c650, but my local Apple doesn't know
when they will be available. He doesn't even have a part
number yet. Does anyone know what the part number
for this drive is and when it will be available?
My Apple dealer suggested I buy one of the CD300 external
drives, but I don't want to pay extra for a case/power supply
I'm not going to use.
-Rodney Jacks
| comp.sys.mac.hardware |
Re: LCIII->PowerPC?
Reply-To:
Organization: Dartmouth College, Hanover, NH
Disclaimer: Personally, I really don't care who you think I speak for.
Moderator: Rec.Arts.Comics.Info
Lines: 10
writes:
>Hi. I own an LCIII and I recently heard an interesting rumor.
>I heard that the LCIII has a built in slot for a PowerPC chip.
>Is this true? I heard that the slot is not the same as the PDS
>slot. Is that true?
Don't believe the hype. There is no such thing as a PowerPC slot.
-Hades
| comp.sys.mac.hardware |
Re: 14" monitors
In-Reply-To: 's message of Wed, 31 Mar 1993 20:39:45 GMT
Organization: University of Michigan EECS Department
Distribution: na
Lines: 37
In article <> writes:
[part of posting removed]
* the Sony CPD-1304 has better video circuitry than either of the
other two monitors. It can display Apple 640x480, VGA 640x480, VGA
800x600 , and Apple 832x624 . It might be able to display Apple's
1024x768, but I'm not sure about this, and the pixels would be real
small anyway so it might not be that useful.
Note that with either Sony monitor, you will need the proper adapter,
which both connects the video signals properly, but also informs the
Macintosh video hardware of which display mode to use.
[part of posting removed]
--
Fred Martin | | 253-7143 | 20 Ames St. Rm. E15-301
Epistemology and Learning Group, MIT Media Lab | Cambridge, MA 02139 USA
I'm assuming that the cabling tells the Mac, at startup, what kind of
monitor is connected. Now I think I've seen ads in popular Mac
magazines for products that allow you to change resolutions
on the fly .
If you were to buy a 1304, would it be possible to switch back and
forth between Apple 640x480 and Apple 832x624 without restarting the
Mac? Is this strictly a hardware startup function, or can software
intervene, or does the Mac hardware occasionally probe the cable
setting and switch automatically?
Thanks,
Eric
| comp.sys.mac.hardware |
Re: Centris Cache & Bernoulli Box
Organization: University of Waterloo
Lines: 7
You will need Driver ver 3.5.2 to work with Quadra/Centris. You can download
it from iomega BBS: 1-801-778-4400
--
Dominic Cheng
Computer Science, University of Waterloo, Ontario, Canada
| comp.sys.mac.hardware |
Robert Everett Brunskill <[email protected]>Re: $$$ to fix TRACKBALL
Organization: Freshman, Electrical and Computer Engineering, Carnegie Mellon, Pittsburgh, PA
Lines: 7
NNTP-Posting-Host: po4.andrew.cmu.edu
In-Reply-To: <>
Of course, if you want to check the honesty of your dealler, take it in
knowing what's wrong, and ask them to tell you. :)
Of course he'll probably know right a way, then charge you a $20 service
fee. :)
Rob
| comp.sys.mac.hardware |
Re: Desktop rebuild and Datadesk keyboard?
Organization: Australian National University
Lines: 17
NNTP-Posting-Host: 150.203.22.65
In-reply-to: 's message of 15 Apr 1993 19:35:58 -0400
My Datadesk Mac 101E keyboard has similar problems. I have found that
holding down the RIGHT-HAND shift key at startup will work , but the left-hand shift key won't .
Similarly, I have trained myself to hold down the RIGHT-HAND pair of
command-option for desktop rebuilds.
I *is* irritating.
Cheers,
Michael.
--
----------------------------/|-|--|-|--|------Michael-Smith-------------------
/_| |\ | | | Mathematics Research Section
--------------------------/--|-|-\|-|_/|------Australian-National-University--
| comp.sys.mac.hardware |
Re: 2 questions about the Centris 650's RAM
Organization: University of Tennessee Computing Center
X-Newsreader: VersaTerm Link v1.1
Distribution: usa
Lines: 27
In Article <>,
wrote:
>With a little luck, I could own a C650 sometime in the near future, and
>so I was just wondering if someone could clear these two questions up for me:
>
>1. What speed SIMMS does the C650 need/want?
>
60ns 72 pin simms.
>2. I've heard two conflicting stories about the total expandibility of the
>C650's RAM...132 and 136 megs. Which is true?
>
2 configs: 4mb & 8mb. In each case the memory is soldered on the board
leaving the 4 simm sockets open. 132mb is the total addressable memory for a
650.
>Just wondering....
>
Michael A. McGuire, :-)
UTCC - User Services
| comp.sys.mac.hardware |